Skip to the content
2 layers67 × 64.5 mmMesh base, the printed circuit board in 3D
Size
67 × 64.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
3
Nets
60
Pads
64
Tracks, vias
24, 0
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Mar 2025
Updated
22 May 2025

Overview

Mesh base is an open-source printed circuit board by edgecollective, from the edgecollective/mesh-depth repository on GitHub, published under the MIT licence. It is a 2-layer board of 67 × 64.5 mm with 3 parts on 60 nets, routed with 24 tracks and 0 vias.

README

README.md

mesh-depth

Parts

3
QtyValueFootprintReferences
2Conn_01x18_SocketConnector_PinSocket_2.54mm:PinSocket_1x18_P2.54mm_VerticalJ1, J2
1Adafruit_Feather_GenericModule:Adafruit_FeatherA1

More from edgecollective/mesh-depth

1
  • 2 layers107.5 × 77 mmSweet p, the printed circuit board in 3D

    Sweet p

    edgecollective/mesh-depth

    41 partsMIT

Similar boards

  • 2 layers40 × 30 mmBlinky, the printed circuit board in 3D

    Blinky

    earthtojake/text-to-cad

    Design physical products with AI

    3 parts26kMIT
  • 2 layers51.9 × 16 mmPassive2-rpi non standard adapter, the printed circuit board in 3D

    Passive2-rpi non standard adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    3 parts4.4kGPL-2.0
  • 2 layers16.3 × 16.3 mmSensor, the printed circuit board in 3D

    Sensor

    scottbez1/splitflap

    DIY split-flap display

    3 parts4.2k
  • 2 layersSub, the printed circuit board in 3D

    Sub

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    3 parts4kMIT
  • 2 layers85 × 30 mmDual stomp, the printed circuit board in 3D

    Dual stomp

    torvalds/GuitarPedal

    Linus learns analog circuits

    3 parts2.5kGPL-2.0
  • 2 layers124.5 × 33.7 mm172319-1 connector, the printed circuit board in 3D

    172319-1 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    3 parts1.2k
  • 2 layers10.5 × 83 mmProgrammingAdapter, the printed circuit board in 3D

    ProgrammingAdapter

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    3 parts1.1k
  • 2 layers21.2 × 51.3 mmPico reset, the printed circuit board in 3D

    Pico reset

    hackclub/sprig

    🍃 Learn to code by making games in a JavaScript web-based game editor.

    3 parts1.1kMIT

Questions

How big is the Mesh base PCB?

It measures 67 × 64.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mesh base use?

3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mesh base KiCad files?

From the edgecollective/mesh-depth repository on GitHub, at the commit this page was made from: the board is base/v0.2/hardware/mesh-base/mesh-base.kicad_pcb and its schematic base/v0.2/hardware/mesh-base/mesh-base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mesh base design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).