2 layers67 × 64.5 mm
2 layers107.5 × 77 mm
Sweet p
edgecollective/mesh-depth- Size
- 107.5 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 36
- Pads
- 140
- Tracks, vias
- 0, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Mar 2025
- Updated
- 22 May 2025
Overview
Sweet p is an open-source printed circuit board by edgecollective, from the edgecollective/mesh-depth repository on GitHub, published under the MIT licence. It is a 2-layer board of 107.5 × 77 mm with 41 parts on 36 nets.
Its parts include 20 resistors, 10 connectors, 2 ICs, 1 capacitor and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.
README
README.mdmesh-depth
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5, R8, R10, R11, R18 |
| 6 | 4.7K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R6, R7, R9, R12, R17 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16 |
| 2 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13, R15 |
| 2 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J8 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19 |
| 1 | 330uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | Conn_01x02_Socket | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Socket | footprints:ssd1306_a | J10 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J9 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J7 |
| 1 | adafruit_tpl511x | footprints:adafruit_tpl511x | U1 |
| 1 | itsybitsy_nrf52840_express | footprints:itsybitsy | A2 |
| 1 | ~ | rak19007:rak19007 | U3 |
More from edgecollective/mesh-depth
1Similar boards
- 2 layers70 × 35 mm
- 2 layers270 × 11 mm
Daylight Disco
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
41 parts1.1kGPL-3.0 - 2 layers27.5 × 48.3 mm
ICE40DevBoard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
41 parts915 - 2 layers45 × 25 mm
Easy PD Sink
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
41 parts599 - 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
41 parts517GPL-2.0 - 2 layers96.1 × 78.6 mm
EYEBROW WARNING INDICATOR LEFT
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
41 parts431 - 2 layers37 × 15 mm
- 2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0
Questions
How big is the Sweet p PCB?
It measures 107.5 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sweet p use?
41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sweet p KiCad files?
From the edgecollective/mesh-depth repository on GitHub, at the commit this page was made from: the board is remote/v0.1/hardware/sweet-p.kicad_pcb and its schematic base/v0.2/hardware/mesh-base/mesh-base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sweet p design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).