2 layers48 × 46 mm
Opi hat
eddyem/ARMsingleboard
Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.
37 parts2GPL-3.0
2 layers56.9 × 63.9 mm
Opi hat
eddyem/ARMsingleboard2Something for singleboard PC (Orange Pi Zero1/2 etc): I2C, SPI etc.
- Size
- 56.9 × 63.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 50
- Pads
- 188
- Tracks, vias
- 370, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20240225)
- Created
- 27 Sep 2022
- Updated
- 21 Aug 2024
Overview
Opi hat is an open-source printed circuit board by eddyem, from the eddyem/ARMsingleboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.9 × 63.9 mm with 53 parts on 50 nets, routed with 370 tracks and 12 vias.
It is built around the LM2576-5.0WU, USBLC6-2SC6 and LM1117-3.3, with the CESD3V3D5, SP0504BAHTG and SS14 among its other parts. Its parts include 11 resistors, 7 connectors, 6 capacitors, 5 ICs and 5 diodes. It belongs with the computers and single-board computers and sensors and measurement boards of this library.
Main components
6
LM2576-5.0WU
TO-263-5-40℃~+125℃@(TJ) 1 3A 4V~40V 52kHz 5V Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
CESD3V3D5
SOD-523120pF 13V 16A 210W@8/20us 3.3V 5V 80nA ESD IEC 61000-4-2 Unidirectional SOD-523 ESD and Surge Protection (TVS/ESD) ROHSJiangsu Changjing Electronics Technology (CJ)ESD And Surge Protection (TVS/ESD)
SP0504BAHTG
SOT-23-5-55℃~+125℃ 100pF 10A@8/20us 11V、15V 150W@8/20us 5V 8.4V 80nA IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-5 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | GND | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP1, TP2, TP13, TP14, TP15, TP17 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10, R11 |
| 3 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5 |
| 2 | 3V3 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP4, TP16 |
| 2 | 510 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | CESD3V3 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U4, U5 |
| 1 | 100u | Inductor_THT:L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 | L1 |
| 1 | 12Vin | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | 1N5822 | Diode_THT:D_DO-201_P3.81mm_Vertical_AnodeUp | D5 |
| 1 | 360 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 47u 10V | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C5 |
| 1 | 47u 16V | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C2 |
| 1 | 47u 6V | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C7 |
| 1 | 5V | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP3 |
| 1 | 5Vout | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | Hydreon | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | I2C | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | LM2576-5.0 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | Lgnd | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP12 |
| 1 | LoL | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP10 |
| 1 | LoR | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP11 |
| 1 | OPI-ZERO2-XDEB | opi-hat:OPIZ2HAT | X1 |
| 1 | PC1 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP6 |
| 1 | PC10 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP5 |
| 1 | PC5 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP7 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U1 |
| 1 | PI16 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP9 |
| 1 | PI6 | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP8 |
| 1 | SP0504BAHT | Package_TO_SOT_SMD:SOT-23-5 | D3 |
| 1 | SPI | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J3 |
| 1 | SS14 | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D4 |
| 1 | USB_B | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J6 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
More from eddyem/ARMsingleboard
1Similar boards
- 2 layers97 × 69.5 mm
- 4 layers30 × 30 mm
ReCamera 2002 POE Board
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
75 parts495Apache-2.0 - 4 layers330.2 × 215.9 mm
- 2 layers208.3 × 146.1 mm
- 2 layers200 × 200 mm
Audio pi
barchstien/network-amp
PCB including DAC, audio amp, RaspberryPi interface and power supply
117 parts - 4 layers130 × 75 mm
- 2 layers54 × 54 mm
Steppers
eddyem/mmpp
MMPP (Multimode photometer-polarimeter) for the telescope Zeiss-1000 of SAO RAS.
55 partsGPL-3.0 - 2 layers60 × 90 mm
Logger
voltlog/Voltlogger
More info about this project in Voltlog #368. If you would like to order one of these boards ready assembled, check out my Tindie store.
111 parts17GPL-3.0
Questions
How big is the Opi hat PCB?
It measures 56.9 × 63.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Opi hat use?
53 parts, built around the LM2576-5.0WU, USBLC6-2SC6, LM1117-3.3 and CESD3V3D5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Opi hat KiCad files?
From the eddyem/ARMsingleboard repository on GitHub, at the commit this page was made from: the board is OrangePiZero2_expboard/opi-hat.kicad_pcb and its schematic OrangePiZero2_expboard/opi-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Opi hat design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).