
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32

Code samples and ready projects based on bare-metal STM32
Stm32 is an open-source printed circuit board by eddyem, from the eddyem/stm32samples repository on GitHub. It is a 2-layer board of 64.5 × 26 mm with 54 parts on 58 nets, routed with 412 tracks and 21 vias.
It is built around the ISO1050DUB, B0505S-1W and LM1117-3.3, with the USBLC6-2SC6 and PESD1CAN among its other parts. Its parts include 30 connectors, 8 capacitors, 7 resistors, 4 ICs and 3 diodes. It belongs with the sensors and measurement and computers and single-board computers boards and the STM32 boards of this library.
The stm32samples repository is a collection of low-level, bare-metal code examples and complete
projects for various STM32 microcontroller series (F0, F1, F3, F4, G0). It uses CMSIS header files
from modm-io/cmsis-header-stm32 for register definitions.
-flto optimisationsdeprecated/This repository is a valuable resource for learning low‑level STM32 programming without vendor libraries. It covers practical applications:
For the latest updates, check the repository on GitHub.
This repository is provided under the GNU General Public License v3 or later. Full text of the GPLv3 is available at https://www.gnu.org/licenses/gpl-3.0.html.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4, C5, C6, C7 |
| 4 | Hole | my_footprints:Hole_3mm | P1, P2, P3, P4 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R6 |
| 2 | 1 | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8 |
| 2 | GND | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J17, J18 |
| 1 | +3.3V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J19 |
| 1 | +5V | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J20 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 120 | Resistor_SMD:R_1210_3225Metric_Pad1.42x2.65mm_HandSolder | R1 |
| 1 | 47u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1 |
| 1 | B0505S | my_footprints:B0x0xS | Q1 |
| 1 | ISO1050DUB | Package_SO:SOP-8_6.62x9.15mm_P2.54mm | U4 |
| 1 | LED0 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LED1 | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | MISO | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J5 |
| 1 | MOSI | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J6 |
| 1 | PA0 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J21 |
| 1 | PA1 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J22 |
| 1 | PA2 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J23 |
| 1 | PA3 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | J24 |
| 1 | PB0 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J11 |
| 1 | PB1 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J12 |
| 1 | PB10 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J25 |
| 1 | PB11 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J26 |
| 1 | PB2 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J15 |
| 1 | PB3 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J16 |
| 1 | PB4 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J13 |
| 1 | PB5 | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J14 |
| 1 | PESD1CAN | TO_SOT_Packages_SMD:SOT-23 | D1 |
| 1 | RX | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J8 |
| 1 | SCK | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J2 |
| 1 | SCL | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J9 |
| 1 | SDA | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J10 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SWDetc | Connector_PinHeader_1.27mm:PinHeader_1x06_P1.27mm_Vertical | J3 |
| 1 | SW_DIP_x01 | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1 |
| 1 | TX | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | J7 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | USB_B | Connector_USB:USB_B_Lumberg_2411_02_Horizontal | J4 |

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32







eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32





team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam

rivotmotors-rnd/ECU_Firmware_V3
RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.



tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.



It measures 64.5 × 26 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the ISO1050DUB, B0505S-1W, LM1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the eddyem/stm32samples repository on GitHub, at the commit this page was made from: the board is F0:F030,F042,F072/usbcan_ringbuffer/kicad/stm32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask eddyem before reusing the design.