Skip to the content
2 layers319.5 × 106 mmKeyboard, the printed circuit board in 3D

PCB and manufacturing files for sandpiper

Size
319.5 × 106 mm
Copper layers
2
Thickness
1.6 mm
Parts
149
Nets
104
Pads
567
Tracks, vias
662, 39
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 May 2025
Updated
15 Mar 2026

Overview

Keyboard is an open-source printed circuit board by ecilasun, from the ecilasun/sandpiper_pcb repository on GitHub. It is a 2-layer board of 319.5 × 106 mm with 149 parts on 104 nets, routed with 662 tracks and 39 vias.

It is built around the ATMEGA32U4-AU and 1N4148WSX. Its parts include 64 diodes, 64 switches, 8 capacitors, 4 resistors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Sandpiper keyboard PCB and enclosure design files

This repo contains the PCB files for sandpiper project.

Notes

  • This PCB is optional and is not required to be able to run sandpiper. It merely contains a custom USB keyboard that fits into the provided enclosure.
  • The enclosure is also optional. Sandpiper does not requre an enclosure to function and can be booted from pretty much any Xynq7020 board with 512Mbytes of memory, an etnernet and USB controller, plus some HDMI connector leading to the FPGA pins. For boards with more memory than 512Mbytes the device tree and SDK has to be updated to shift device addresses to the last 32Mbytes of memory. This also means th driver has to be rebuilt with those addresses (in the future driver will read them from the devic tree so there won't be a need to rebuild it)
  • The enclosure is designed to be printed in one big piece for the top and bottom halves (plus the side connection pieces) Recommended material is PETG-strong as it is very unlikely to warp. Other materials might also work but print at your own risk or split the design manually, as there's no built-in measures in the design to avoid warping.
  • Enclosure design requires solidworks connected, and the pcb design required KiCad 9 or above.
  • If you intend to build a PCB yourself via online services (oshpark, jlcpcb etc) please note to match the parts to the ones listed as close as you can. Mismatches in part numbers might result in wrong pin connections.
  • If you build the keyboard PCB and want to program the firmware on it, please see the firmware/ folder in this repo. Use an AVR programmer with AVRdude / AVRdudess or QMK Toolbox to burn the flash onto the chip.
  • The pin header for the programmer goes on the bottom side of the board where the chip sits, and the square pin connection is actually the MISO pin and not the ground pin due to an error. Please see the following image to locate the correct pins and plug the programmer header accordingly:

  • Do not forget to cut or remove the programming header pins once you're done so that the board does not get stuck or bend when sliding it into the rails on the bottom side of the enclosure.

Documentation

See the Sandpiper project page for links to all related repositories and SDK documentation.

Development toolchains

See the Sandpiper project page for development toolchain setup instructions.

Parts

149
QtyValueFootprintReferences
631N4148WS‎Diode_SMD:D_SOD-323_HandSolderingD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +47
30.1uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4
210KResistor_SMD:R_0805_2012MetricR1, R4
222RResistor_SMD:R_0805_2012MetricR2, R3
222pFCapacitor_SMD:C_0805_2012MetricC6, C7
10sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS11
11sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS2
1100nFCapacitor_SMD:C_0805_2012MetricC8
110uFCapacitor_SMD:C_0805_2012MetricC5
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11uFCapacitor_SMD:C_0805_2012MetricC1
12sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS3
13sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS4
14sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS5
15sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS6
16sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS7
17sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS8
18sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS9
19sandpiperfootprints:SW_Cherry_MX_1.00u_PCBS10
1Asandpiperfootprints:SW_Cherry_MX_1.00u_PCBS30
1ATmega32U4-APackage_QFP:TQFP-44_10x10mm_P0.8mmU1
1Bsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS47
1Csandpiperfootprints:SW_Cherry_MX_1.00u_PCBS45
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1Dsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS32
1DownArrowsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS62
1Esandpiperfootprints:SW_Cherry_MX_1.00u_PCBS18
1ESCsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS1
1Fsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS33
1Gsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS34
1Hsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS35
1Isandpiperfootprints:SW_Cherry_MX_1.00u_PCBS23
1ISPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ4
1Jsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS36
1Ksandpiperfootprints:SW_Cherry_MX_1.00u_PCBS37
1Lsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS38
1LED_READYLED_SMD:LED_1206_3216MetricD64
1LeftAltButton_Switch_Keyboard:SW_Cherry_MX_1.25u_PCBS56
1LeftArrowsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS61
1LeftCtlButton_Switch_Keyboard:SW_Cherry_MX_1.25u_PCBS54
1Msandpiperfootprints:SW_Cherry_MX_1.00u_PCBS49
1Nsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS48
1Osandpiperfootprints:SW_Cherry_MX_1.00u_PCBS24
1Psandpiperfootprints:SW_Cherry_MX_1.00u_PCBS25
1Qsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS16
1Rsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS19
1RESETButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1
1RightAltButton_Switch_Keyboard:SW_Cherry_MX_1.25u_PCBS58
1RightArrowsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS63
1RightFunctionsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS59
1Ssandpiperfootprints:SW_Cherry_MX_1.00u_PCBS31
1SpaceButton_Switch_Keyboard:SW_Cherry_MX_6.25u_PCBS57
1Specialsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS55
1Tsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS20
1TABsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS15
1Usandpiperfootprints:SW_Cherry_MX_1.00u_PCBS22
1USB_C_ReceptacleConnector_USB:USB_C_Receptacle_GCT_USB4085J1
1Uparrowsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS60
1Vsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS46
1Wsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS17
1Xsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS44
1Ysandpiperfootprints:SW_Cherry_MX_1.00u_PCBS21
1Zsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS43
1backslashsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS28
1backspaceButton_Switch_Keyboard:SW_Cherry_MX_2.00u_PCBS14
1capslocksandpiperfootprints:SW_Cherry_MX_1.00u_PCBS29
1equalssandpiperfootprints:SW_Cherry_MX_1.00u_PCBS13
1greatersandpiperfootprints:SW_Cherry_MX_1.00u_PCBS51
1leftbracketsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS26
1leftshiftButton_Switch_Keyboard:SW_Cherry_MX_1.75u_PCBS42
1lesssandpiperfootprints:SW_Cherry_MX_1.00u_PCBS50
1minussandpiperfootprints:SW_Cherry_MX_1.00u_PCBS12
1quotessandpiperfootprints:SW_Cherry_MX_1.00u_PCBS40
1returnButton_Switch_Keyboard:SW_Cherry_MX_2.25u_PCBS41
1rightbracketsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS27
1rightshiftButton_Switch_Keyboard:SW_Cherry_MX_2.25u_PCBS53
1semicolonsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS39
1slashsandpiperfootprints:SW_Cherry_MX_1.00u_PCBS52

The 145 most common of 149 parts.

Similar boards

  • 2 layers243.2 × 106 mm3W6, the printed circuit board in 3D

    3W6

    weteor/3W6

    a small compact 3x5+3 split ortho keyboard

    113 parts488
  • 2 layers228.4 × 85 mmLeChiffre, the printed circuit board in 3D

    LeChiffre

    tominabox1/Le-Chiffre-Keyboard

    Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com

    105 parts183GPL-3.0
  • 2 layers228.6 × 76.8 mmSchwann Rev0.5b, the printed circuit board in 3D

    Schwann Rev0.5b

    The-Royal/The_Royal_Open-Source-Projects

    A Master Repository For All things Royal Made

    127 parts159MIT
  • 2 layers30 × 65 mmKeyboard mcu, the printed circuit board in 3D

    Keyboard mcu

    dpapavas/lagrange-keyboard

    A configurable, handwired, ergonomic keyboard

    26 parts137AGPL-3.0
  • 2 layers88.4 × 80 mmLHS Controller PCB, the printed circuit board in 3D

    LHS Controller PCB

    dmcke5/ZenDeck

    This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.

    76 parts133CERN-OHL-S-2.0
  • 2 layers259.5 × 89.1 mmSteno, the printed circuit board in 3D

    Steno

    crides/steno

    Embedded steno firmware + custom steno PCBs

    61 parts75MIT
  • 2 layers99.1 × 99.1 mmPower supply panelized, the printed circuit board in 3D

    Power supply panelized

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    223 parts75

Questions

How big is the Keyboard PCB?

It measures 319.5 × 106 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

149 parts, built around the ATMEGA32U4-AU and 1N4148WSX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the ecilasun/sandpiper_pcb repository on GitHub, at the commit this page was made from: the board is keyboard/keyboard.kicad_pcb and its schematic fpgamock/fpgamock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask ecilasun before reusing the design.