

Keyboard
PCB and manufacturing files for sandpiper
- Size
- 319.5 × 106 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 149
- Nets
- 104
- Pads
- 567
- Tracks, vias
- 662, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2025
- Updated
- 15 Mar 2026
Overview
Keyboard is an open-source printed circuit board by ecilasun, from the ecilasun/sandpiper_pcb repository on GitHub. It is a 2-layer board of 319.5 × 106 mm with 149 parts on 104 nets, routed with 662 tracks and 39 vias.
It is built around the ATMEGA32U4-AU and 1N4148WSX. Its parts include 64 diodes, 64 switches, 8 capacitors, 4 resistors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)1N4148WSX
SOD-323-65℃~+150℃ 1 Independent 1.25V@150mA 150mA 1uA@75V 200mW 2A 6ns 75V SOD-323 Switching Diodes ROHSShenzhen JingYangDiodes - General Purpose
README
README.mdSandpiper keyboard PCB and enclosure design files
This repo contains the PCB files for sandpiper project.
Notes
- This PCB is optional and is not required to be able to run sandpiper. It merely contains a custom USB keyboard that fits into the provided enclosure.
- The enclosure is also optional. Sandpiper does not requre an enclosure to function and can be booted from pretty much any Xynq7020 board with 512Mbytes of memory, an etnernet and USB controller, plus some HDMI connector leading to the FPGA pins. For boards with more memory than 512Mbytes the device tree and SDK has to be updated to shift device addresses to the last 32Mbytes of memory. This also means th driver has to be rebuilt with those addresses (in the future driver will read them from the devic tree so there won't be a need to rebuild it)
- The enclosure is designed to be printed in one big piece for the top and bottom halves (plus the side connection pieces) Recommended material is PETG-strong as it is very unlikely to warp. Other materials might also work but print at your own risk or split the design manually, as there's no built-in measures in the design to avoid warping.
- Enclosure design requires solidworks connected, and the pcb design required KiCad 9 or above.
- If you intend to build a PCB yourself via online services (oshpark, jlcpcb etc) please note to match the parts to the ones listed as close as you can. Mismatches in part numbers might result in wrong pin connections.
- If you build the keyboard PCB and want to program the firmware on it, please see the firmware/ folder in this repo. Use an AVR programmer with AVRdude / AVRdudess or QMK Toolbox to burn the flash onto the chip.
- The pin header for the programmer goes on the bottom side of the board where the chip sits, and the square pin connection is actually the MISO pin and not the ground pin due to an error. Please see the following image to locate the correct pins and plug the programmer header accordingly:

- Do not forget to cut or remove the programming header pins once you're done so that the board does not get stuck or bend when sliding it into the rails on the bottom side of the enclosure.
Documentation
See the Sandpiper project page for links to all related repositories and SDK documentation.
Development toolchains
See the Sandpiper project page for development toolchain setup instructions.
Parts
149| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | 1N4148WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +47 |
| 3 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R4 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C6, C7 |
| 1 | 0 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S11 |
| 1 | 1 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 2 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S3 |
| 1 | 3 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S4 |
| 1 | 4 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S5 |
| 1 | 5 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S6 |
| 1 | 6 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S7 |
| 1 | 7 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S8 |
| 1 | 8 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S9 |
| 1 | 9 | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S10 |
| 1 | A | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S30 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | B | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S47 |
| 1 | C | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S45 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | D | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S32 |
| 1 | DownArrow | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S62 |
| 1 | E | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S18 |
| 1 | ESC | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S1 |
| 1 | F | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S33 |
| 1 | G | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S34 |
| 1 | H | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S35 |
| 1 | I | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S23 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | J | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S36 |
| 1 | K | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S37 |
| 1 | L | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S38 |
| 1 | LED_READY | LED_SMD:LED_1206_3216Metric | D64 |
| 1 | LeftAlt | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | S56 |
| 1 | LeftArrow | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S61 |
| 1 | LeftCtl | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | S54 |
| 1 | M | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S49 |
| 1 | N | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S48 |
| 1 | O | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S24 |
| 1 | P | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S25 |
| 1 | Q | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S16 |
| 1 | R | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S19 |
| 1 | RESET | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | RightAlt | Button_Switch_Keyboard:SW_Cherry_MX_1.25u_PCB | S58 |
| 1 | RightArrow | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S63 |
| 1 | RightFunction | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S59 |
| 1 | S | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S31 |
| 1 | Space | Button_Switch_Keyboard:SW_Cherry_MX_6.25u_PCB | S57 |
| 1 | Special | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S55 |
| 1 | T | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S20 |
| 1 | TAB | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S15 |
| 1 | U | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S22 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Uparrow | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S60 |
| 1 | V | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S46 |
| 1 | W | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S17 |
| 1 | X | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S44 |
| 1 | Y | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S21 |
| 1 | Z | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S43 |
| 1 | backslash | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S28 |
| 1 | backspace | Button_Switch_Keyboard:SW_Cherry_MX_2.00u_PCB | S14 |
| 1 | capslock | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S29 |
| 1 | equals | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S13 |
| 1 | greater | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S51 |
| 1 | leftbracket | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S26 |
| 1 | leftshift | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | S42 |
| 1 | less | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S50 |
| 1 | minus | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S12 |
| 1 | quotes | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S40 |
| 1 | return | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | S41 |
| 1 | rightbracket | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S27 |
| 1 | rightshift | Button_Switch_Keyboard:SW_Cherry_MX_2.25u_PCB | S53 |
| 1 | semicolon | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S39 |
| 1 | slash | sandpiperfootprints:SW_Cherry_MX_1.00u_PCB | S52 |
The 145 most common of 149 parts.
Similar boards
- 4 layers134.4 × 98.5 mm

- 2 layers243.2 × 106 mm

- 2 layers228.4 × 85 mm

LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm

Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT - 2 layers30 × 65 mm

Keyboard mcu
dpapavas/lagrange-keyboard
A configurable, handwired, ergonomic keyboard
26 parts137AGPL-3.0 - 2 layers88.4 × 80 mm

LHS Controller PCB
dmcke5/ZenDeck
This is the second revision of my Mini PC based handheld Gaming PC! It is designed for a Beelink SER 5 Mini PC but could be adapted to other systems by changing the mounting brackets and outlet plate.
76 parts133CERN-OHL-S-2.0 - 2 layers259.5 × 89.1 mm

- 2 layers99.1 × 99.1 mm

Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75
Questions
How big is the Keyboard PCB?
It measures 319.5 × 106 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
149 parts, built around the ATMEGA32U4-AU and 1N4148WSX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the ecilasun/sandpiper_pcb repository on GitHub, at the commit this page was made from: the board is keyboard/keyboard.kicad_pcb and its schematic fpgamock/fpgamock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask ecilasun before reusing the design.