2 layers59.7 × 52.1 mm
2 layers63.5 × 52.1 mm
DB tr switch tgc v1 2
echopen/PRJ-medtec_kit19- Size
- 63.5 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 50
- Pads
- 176
- Tracks, vias
- 257, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Oct 2016
- Updated
- 19 Dec 2017
Overview
DB tr switch tgc v1 2 is an open-source printed circuit board by echopen, from the echopen/PRJ-medtec_kit repository on GitHub. It is a 2-layer board of 63.5 × 52.1 mm with 58 parts on 50 nets, routed with 257 tracks and 9 vias.
It is built around the MD0100N8-G and BAV99. Its parts include 26 capacitors, 12 resistors, 8 inductors, 3 connectors and 2 ICs.
Main components
2README
README.mdProject
Name
PRJ-medtec_kit [blocked]
Title @lang=fr
Projet de kit d'expérimentation
Title @lang=en
Experiment kit project
About @lang=en
Designing a modular hardware development kit to spread the project and raise contributions.
Challenge
CHG-medtec [blocked]
Uses
This repository provid all is needed to make an echOpen kit. It is divided in six folders:
- configurations, in this folder one find the different working configuration to have a functional kit. It lists the différent daughter board to plug on a mother and the mecanic modules used.
- electronic, in this folder one can find the daughter boards sources, plans... And to software for the microcontrolers or FPGA.
- installation, in this folder one can find the instruction to download and install the software need by your computer (linux or windows user). There is also the instructions for installing boards such as arduino or RedPitaya and how to launch the kit.
- license, in this folder one can find the echOpen license.
- mecanic, in this folder one can find the sources for mecanic pieces.
- miscellanous contain informations about functions and interfaces.
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Echopen:CMS_0603 | C2, C5, C7, C11, C12, C13, C14, C15, C17, C18, C19, C21, C23, C24, C25, C26 +2 |
| 8 | 120n | Echopen:CMS_0603 | L1, L2, L3, L4, L5, L6, L7, L8 |
| 4 | 100 | Echopen:CMS_0603 | R3, R4, R9, R10 |
| 4 | 237 | Echopen:CMS_0603 | R5, R6, R11, R12 |
| 2 | 10u | Echopen:CMS_1206 | C1, C16 |
| 2 | 18n | Echopen:CMS_1206 | C4, C20 |
| 2 | 1n | Echopen:CMS_0603 | C6, C10 |
| 2 | 22p | Echopen:CMS_0603 | C3, C22 |
| 2 | 274 | Echopen:CMS_0603 | R1, R8 |
| 2 | TRANSFO_6pins | Echopen:Transfo_6pins(coilcraft) | T1, T2 |
| 1 | 0 | Echopen:Resistor_TH_common | R7 |
| 1 | 220 | Echopen:CMS_0603 | R2 |
| 1 | AD8332 | Echopen:TSSOP-28(AD8332) | U2 |
| 1 | BAV99 | Echopen:SOT-23 | D1 |
| 1 | CONN_01X02 | Socket_Strips:Socket_Strip_Angled_1x02 | P3 |
| 1 | CONN_01X19 | Echopen:Header_pin_angled_1x19 | P2 |
| 1 | JUMPER | Echopen:Jumper | JP1 |
| 1 | MD0100 | Echopen:SOT89-3_(MD0100) | U1 |
| 1 | OPA625 | Echopen:SOT-23-6_Handsoldering(OPA625) | AOP1 |
| 1 | SMA | Echopen:SMA | P1 |
| 1 | SWITCH_INV | Buttons_Switches_ThroughHole:SW_Micro_SPST | SW1 |
| 1 | TEST_1P | Measurement_Points:Test_Point_Keystone_5000-5004_Miniature | W1 |
More from echopen/PRJ-medtec_kit
12- 2 layers45.7 × 52.1 mm
- 2 layers53.3 × 52.1 mm
- 2 layers50.8 × 52.1 mm
- 2 layers54.6 × 52.1 mm
- 2 layers64.8 × 52.1 mm
- 2 layers54.6 × 52.1 mm
- 2 layers64.8 × 52.1 mm
- 2 layers47 × 52.1 mm
- 2 layers45.7 × 52.1 mm
- 2 layers41.9 × 52.1 mm
- 2 layers55.9 × 52.1 mm
Similar boards
- 4 layers87.1 × 78.2 mm
- 4 layers200 × 100 mm
- 4 layers85 × 54 mm
- 2 layers38.1 × 25.4 mm
Analog Frontend
kelu124/Analog_Frontend
An analog circuit that consists of a transmitter and receiver for an ultrasound system.
52 parts4 - 2 layers35.5 × 50 mm
- 2 layers130 × 80 mm
- 4 layers93.2 × 62.4 mm
Compute module
magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module
66 parts214GPL-3.0 - 4 layers65 × 56 mm
Questions
How big is the DB tr switch tgc v1 2 PCB?
It measures 63.5 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DB tr switch tgc v1 2 use?
58 parts, built around the MD0100N8-G and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DB tr switch tgc v1 2 KiCad files?
From the echopen/PRJ-medtec_kit repository on GitHub, at the commit this page was made from: the board is electronic/daughter_boards/DB-tr_switch_tgc/DB-tr_switch_tgc_v2/src/DB-tr_switch_tgc_v1_2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DB tr switch tgc v1 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask echopen before reusing the design.