Skip to the content
2 layers21.6 × 32.4 mmEsc fets, the printed circuit board in 3D

Repo for a variety of small breakout projects.

Size
21.6 × 32.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
20
Pads
80
Tracks, vias
142, 66
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Mar 2019
Updated
3 Mar 2019

Overview

Esc fets is an open-source printed circuit board by ebabcock72, from the ebabcock72/breakout_PCBs repository on GitHub. It is a 2-layer board of 21.6 × 32.4 mm with 29 parts on 20 nets, routed with 142 tracks and 66 vias.

It is built around the BC847 and UT6MA3TCR. Its parts include 15 resistors, 3 transistors and 3 connectors. It belongs with the robots and motor control boards of this library.

Main components

2

Parts

29
QtyValueFootprintReferences
5PADTestPoint:TestPoint_Pad_3.0x3.0mmPAD1, PAD2, PAD3, PAD4, PAD5
3100Resistor_SMD:R_0603_1608MetricR7, R8, R9
3100kResistor_SMD:R_0603_1608MetricR4, R5, R6
310kResistor_SMD:R_0603_1608MetricR10, R12, R14
31kResistor_SMD:R_0603_1608MetricR1, R2, R3
32k2Resistor_SMD:R_0603_1608MetricR11, R13, R15
3BC847Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
3Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J2, J3
3UT6MA3blheli_esc:UT6MA3FET1, FET2, FET3

More from ebabcock72/breakout_PCBs

4
  • 2 layers20.3 × 12.7 mmFets2, the printed circuit board in 3D

    Fets2

    ebabcock72/breakout_PCBs

    Repo for a variety of small breakout projects.

    8 parts1
  • 2 layers7.9 × 10.2 mmFet driver, the printed circuit board in 3D

    Fet driver

    ebabcock72/breakout_PCBs

    Repo for a variety of small breakout projects.

    5 parts1
  • 2 layers16.5 × 21.6 mmJtag breadboard, the printed circuit board in 3D

    Jtag breadboard

    ebabcock72/breakout_PCBs

    Repo for a variety of small breakout projects.

    3 parts1
  • 2 layers19.3 × 32 mmSilabs 24QSOP, the printed circuit board in 3D

    Silabs 24QSOP

    ebabcock72/breakout_PCBs

    Repo for a variety of small breakout projects.

    3 parts1

Similar boards

  • 4 layers22.3 × 22.3 mmTinyPEPPER2, the printed circuit board in 3D

    TinyPEPPER2

    fishpepper/tinyPEPPER2

    tinyPEPPER2 4in1 ESC

    163 parts33
  • 4 layers20 × 20 mmELRS Rx 4PWM ESC 1S rev1.0, the printed circuit board in 3D

    ELRS Rx 4PWM ESC 1S rev1.0

    crteensy/ELRS-8285-1280-PWM-ESC

    A 2.4 GHz ELRS resceiver with PWM output and a 1S, 5A ESC

    83 parts13MIT
  • 2 layers271.8 × 114.3 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    426 parts282
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 4 layers124.6 × 68.7 mmOssc board, the printed circuit board in 3D

    Ossc board

    marqs85/ossc_pcb

    ossc pcb design files

    265 parts163
  • 2 layers200 × 100 mmPolykit x monosynth, the printed circuit board in 3D

    Polykit x monosynth

    polykit/polykit-x-monosynth

    The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer

    167 parts94
  • 2 layers156.6 × 125.2 mmAutoFeeder, the printed circuit board in 3D

    AutoFeeder

    ErichStyger/McuOpenPnP_Machine

    Repository for the McuOnEclipse OpenPnP machine

    58 parts69

Questions

How big is the Esc fets PCB?

It measures 21.6 × 32.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esc fets use?

29 parts, built around the BC847 and UT6MA3TCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esc fets KiCad files?

From the ebabcock72/breakout_PCBs repository on GitHub, at the commit this page was made from: the board is esc_fets/esc_fets.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esc fets design in my own project?

Its repository states no licence, so its author keeps all rights: ask ebabcock72 before reusing the design.