Skip to the content
2 layers54.9 × 99.3 mmTool checkout cabinet modules, the printed circuit board in 3D

Tool checkout cabinet modules

ealott/tool_checkout_cabinet2

An inexpensive, RFID-based door access solution for individual cabinets. Based on Micropython and the ESP8266 MCU.

Size
54.9 × 99.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
43
Pads
110
Tracks, vias
175, 11
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Aug 2020
Updated
1 May 2023

Overview

Tool checkout cabinet modules is an open-source printed circuit board by ealott, from the ealott/tool_checkout_cabinet repository on GitHub. It is a 2-layer board of 54.9 × 99.3 mm with 22 parts on 43 nets, routed with 175 tracks and 11 vias.

It is built around the AOD4184A and DMG2302U. Its parts include 9 connectors, 4 resistors, 2 transistors, 1 IC and 1 diode. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

Wifi-Enabled RFID Cabinet Lock

An inexpensive, RFID-based door access solution for individual cabinets. Based on Micropython and the ESP8266/ESP32 MCU. Alt text

Parts

22
QtyValueFootprintReferences
3PinHeader_1x02_P2.54mm_VerticalConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1-ALT, J5-ALT, J6-ALT
3Screw_Terminal_01x02TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1, J5, J6
210kResistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR1, R3
24k7Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2, R4
2Conn_01x20_MaleConnector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ3, J4
1AOD4184AAOD4184A:DPAK228P994X240-4NQ2
1DMG2302UPackage_TO_SOT_SMD:SOT-23Q1
1ESP32_DevKit_V1_DOITesp32_devkit_v1_doit:esp32_devkit_v1_doitU1
1Mini360_ModuleCharleslabs_Parts:Mini360_ModuleA1
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_bornier-4_P5.08mmJ2
1V8PAM10S-M3_HSamacSys_Parts:V8PAM10SHM3HD1

The 18 most common of 22 parts.

Similar boards

  • 2 layers69 × 72 mmMMv3, the printed circuit board in 3D

    MMv3

    MrCroesus/MMv3

    MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.

    47 parts16Apache-2.0
  • 4 layers40 × 19 mmRom2k40, the printed circuit board in 3D

    Rom2k40

    mengstr/Rom2k40

    EPROM emulator based on RP2040

    28 parts12
  • 4 layers45.7 × 90.3 mmIo v2-Board, the printed circuit board in 3D

    Io v2-Board

    Maeswoon/UNHSEDS

    great people building dream rockets

    81 parts11
  • 2 layers101.6 × 31.8 mmPico 12vrgb controller, the printed circuit board in 3D

    Pico 12vrgb controller

    bluekeyes/pico-12vrgb-hid-controller

    4-pin RGB controller using the Pi Pico and USB HID

    20 parts9MIT
  • 2 layers54.1 × 48.6 mmE Fidget V3, the printed circuit board in 3D

    E Fidget V3

    miameows/E-Fidget

    Hi there! There's a lot of moving parts with this project right now, so why don't you check out my latest blog post for more info?

    29 parts6MIT
  • 2 layers75.1 × 100 mmZamkonator, the printed circuit board in 3D

    Zamkonator

    alufers/Zamkonator

    RFID access-control board with PoE and Wiegand

    182 parts5
  • 2 layers240 × 100 mmKha bgt extend, the printed circuit board in 3D

    Kha bgt extend

    kiu/kha

    Overengineered Modular RS-485 Multi-Master 19" Subrack Home Automation / Control

    69 parts5
  • 2 layers22 × 44.1 mmSao candle, the printed circuit board in 3D

    Sao candle

    exclamationMarek/skeuomorphicer-candle-sao

    A more skeuomorphic, electronic candle, that you turn on using a flame and turn off by blowing on it. A SAO version of my standalone skeuomorphicer candle.

    12 parts4

Questions

How big is the Tool checkout cabinet modules PCB?

It measures 54.9 × 99.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tool checkout cabinet modules use?

22 parts, built around the AOD4184A and DMG2302U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tool checkout cabinet modules KiCad files?

From the ealott/tool_checkout_cabinet repository on GitHub, at the commit this page was made from: the board is pcb/tool_checkout_cabinet/tool_checkout_cabinet_modules.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tool checkout cabinet modules design in my own project?

Its repository states no licence, so its author keeps all rights: ask ealott before reusing the design.