
Vectorscope
shabaz123/Vectorscope_GuyFawkes
A reimplementation of the Vectorscope from https://github.com/Hack-a-Day/Vectorscope

4-pin RGB controller using the Pi Pico and USB HID
Pico 12vrgb controller is an open-source printed circuit board by bluekeyes, from the bluekeyes/pico-12vrgb-hid-controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 101.6 × 31.8 mm with 20 parts on 53 nets, routed with 176 tracks and 12 vias.
It is built around the LM4040C30FTA and DMG2302U. Its parts include 12 transistors, 5 connectors and 2 ICs. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
A 4-channel 12V-G-R-B controller for RGB fans and LED strips using the Raspberry Pi Pico and controlled via USB HID. Designed to be installed inside a PC case as an alternative or addition to motherboard headers.
It implements the "Lighting and Illumination" (0x59) HID usage page, making
it fully compatible with the Dynamic Lighting feature in Windows 11.
It also implements the "Sensors" (0x20) HID usage page (for a temperature
sensor) and a vendor (0xFF00) HID usage page for custom controls.
Note this does not support 3-pin addressable RGB LEDs, but uses the semi-standard 4-pin 12V-G-R-B connector, where all devices connected to a channel show the same color.


When running in autonomous mode, the controller implements configurable animations. Use the CLI to set the parameters or save an animation as the default for a channel.
Fades a single color on and off. The fade on time, on time, fade off time, and off time are all configurable.
https://user-images.githubusercontent.com/1745813/233868169-5f5d1403-0b08-4b99-b51f-30fe5f666057.mp4
Fades between up to 8 different colors. The fade time and hold time are configurable.
https://user-images.githubusercontent.com/1745813/233868393-662b7a13-106e-483d-9052-4a47977f7780.mp4
This project is split into three parts:
hw/ contains schematics and PCB files (KiCAD)fw/ contains device firmware (C)cli/ contains the command-line control program (Rust)See each directory for more details.
The hardware is only tested on Windows 11, using both the Dynamic Lighting feature and the included CLI. The CLI does not support other platforms yet.
MIT
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | DMG2302U | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 2 | Conn_01x04_RGB | pico_12vrgb_controller:PinHeader_12VGRB_Vertical_RightText | J3, J4 |
| 2 | Conn_01x04_RGB | pico_12vrgb_controller:PinHeader_12VGRB_Vertical_LeftText | J1, J2 |
| 1 | LM4040C30FTA | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | Raspberry_Pi_Pico | pico_12vrgb_controller:RPi_Pico_SMD | U1 |
| 1 | Sata_15pin_Power | pico_12vrgb_controller:ModDIY_SATA_15pin_RightAngle_Header | J5 |
The 19 most common of 20 parts.

shabaz123/Vectorscope_GuyFawkes
A reimplementation of the Vectorscope from https://github.com/Hack-a-Day/Vectorscope




oresat/oresat-adcs-hardware
Controller PCB for OreSat reaction wheels, magnetorquers, IMU, and magnetometers

MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.


It measures 101.6 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the LM4040C30FTA and DMG2302U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bluekeyes/pico-12vrgb-hid-controller repository on GitHub, at the commit this page was made from: the board is hw/pcb/pico_12vrgb_controller.kicad_pcb and its schematic hw/pcb/pico_12vrgb_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).