2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers15 × 11.3 mm
Eta3000 module
ealex/eta3000_module42S balancer module based on the ETA3000 inductive balancer IC
- Size
- 15 × 11.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 6
- Pads
- 21
- Tracks, vias
- 15, 7
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Aug 2022
- Updated
- 1 Sep 2022
Overview
Eta3000 module is an open-source printed circuit board by ealex, from the ealex/eta3000_module repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 15 × 11.3 mm with 10 parts on 6 nets, routed with 15 tracks and 7 vias.
It is built around the ETA3000S2G and SRN3030HA-1R0Y. Its parts include 4 capacitors, 3 connectors, 1 resistor, 1 IC and 1 inductor.
Main components
2README
README.mdeta3000_module
2S balancer module based on the ETA3000 inductive balancer IC
This uses the SOT23-6 chip and it's designed for the smallest footprint possible. The ballancing curent is intended to be low, for heat dissipation reasons. The modules are intented to be conected toghether for more than 2S packs.
TODO: update README when the PCB's are here
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x01 | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1, J2, J3 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 3.3u | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 1 | 500k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ETA3000S2G | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | SRN3030HA-1R0Y | eta3000_module:SRN3030 | L1 |
Questions
How big is the Eta3000 module PCB?
It measures 15 × 11.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eta3000 module use?
10 parts, built around the ETA3000S2G and SRN3030HA-1R0Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eta3000 module KiCad files?
From the ealex/eta3000_module repository on GitHub, at the commit this page was made from: the board is eta3000_module/eta3000_module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eta3000 module design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0