Skip to the content
2 layers76.2 × 106.7 mmSFS, the printed circuit board in 3D

An ongoing repository for development and improvement of the Js5 sensor by Besilty et al. 2022.Includes Arduino code, R scripts, design schematics, and issue logs.

Size
76.2 × 106.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
56
Pads
151
Tracks, vias
257, 8
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
17 Sep 2024
Updated
1 Mar 2026

Overview

SFS is an open-source printed circuit board by eaguirre12, from the eaguirre12/CUNY-Js5 repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 76.2 × 106.7 mm with 40 parts on 56 nets, routed with 257 tracks and 8 vias.

It is built around the ADS1115, DS3231S# and IRF9540NS, with the IRLB4132PBF among its other parts. Its parts include 9 resistors, 8 capacitors, 6 diodes, 5 ICs and 4 connectors.

Main components

4

README

README.md

CUNY-Js5

An ongoing repository for development and improvement of the Js5 sensor by Besilty et al. 2022.Includes Arduino code, R scripts, design schematics, and issue logs.

More explanation to come as we develop this repository

-- Project Overview -- Arduino Code Instructions -- R code for data processing -- Sensor schematics -- Contribution and usage guidelines

Parts

40
QtyValueFootprintReferences
833nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1, C2, C3, C4, C5, C6, C7, C8
610kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3, R4, R5, R6
6LEDLED_THT:LED_D3.0mmD1, D2, D3, D4, D5, D6
2ADS1115SapFlow_Footprints:ADS1115_BreakoutU2, U3
2MountingHoleMountingHole:MountingHole_4.3mm_M4H1, H2
2SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1, SW2
1100KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR11
1100kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR12
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR13
12N7000Package_TO_SOT_THT:TO-92_InlineQ3
1Adafruit_Feather_M0_AdaloggerModule:Adafruit_FeatherA1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1DS3231SapFlow_Footprints:DS3231_Breakout_RightAngleU4
1IRF9540NPackage_TO_SOT_THT:TO-262-3_VerticalQ1
1IRLB4132Package_TO_SOT_THT:TO-262-3_VerticalQ2
1L7806Package_TO_SOT_THT:TO-220-3_VerticalU6
1LT1460Package_TO_SOT_THT:TO-92_InlineU7
1Screw_Terminal_01x02SapFlow_Footprints:Wurth_Screwless45_3.81mm_2J4
1Screw_Terminal_01x04SapFlow_Footprints:Wurth_Screwless45_3.81mm_4J6
1Screw_Terminal_01x08SapFlow_Footprints:Wurth_Screwless45_3.81mm_8J1

Similar boards

  • 2 layers116.8 × 92.2 mmControllerStage, the printed circuit board in 3D

    ControllerStage

    pommen/Programmable_Load

    132 parts
  • 2 layers106.7 × 61.6 mmPiCanBoard, the printed circuit board in 3D

    PiCanBoard

    ieb/EngineManagement

    Replacement engine electronics for a Volvo Penta D2-40 and other MDI based engines.

    48 parts1
  • 4 layers68.6 × 53.3 mmTapMatrix, the printed circuit board in 3D

    TapMatrix

    cbonsig/openclock

    Open Clock: an open source hardware touchscreen digital clock

    65 parts27
  • 2 layers398.2 × 398.2 mmLargeWordClock LargeKickstarter, the printed circuit board in 3D

    LargeWordClock LargeKickstarter

    PCBench/PCBench

    resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

    1,591 parts21MIT
  • 2 layers167 × 52 mmIn-2-nixie, the printed circuit board in 3D

    In-2-nixie

    mistic100/Nixie-Clock-IN2

    Check out my other projects: - Nixie Clock IN14 - Nixie Clock IN12 - IV-27 VFD Clock

    34 parts10

Questions

How big is the SFS PCB?

It measures 76.2 × 106.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SFS use?

40 parts, built around the ADS1115, DS3231S#, IRF9540NS and IRLB4132PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SFS KiCad files?

From the eaguirre12/CUNY-Js5 repository on GitHub, at the commit this page was made from: the board is PCB/SFS.kicad_pcb and its schematic PCB/SFS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SFS design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).