2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0
2 layers55.9 × 31.8 mm
PcbTest
EagleEyeElite/pcbTest- Size
- 55.9 × 31.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 35
- Pads
- 94
- Tracks, vias
- 295, 48
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Apr 2020
- Updated
- 17 Apr 2020
Overview
PcbTest is an open-source printed circuit board by EagleEyeElite, from the EagleEyeElite/pcbTest repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 31.8 mm with 22 parts on 35 nets, routed with 295 tracks and 48 vias.
It is built around the ATMEGA328P-AU. Its parts include 5 resistors, 4 diodes, 2 ICs, 2 connectors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdpcbTest
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 220 | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4, R5 |
| 4 | LED | LEDs:LED_0603_HandSoldering | D1, D2, D3, D4 |
| 2 | CP | Capacitors_THT:CP_Radial_Tantal_D4.5mm_P2.50mm | 22pF1, 22pF2 |
| 1 | Logo:Klaus_Logo_Medium | ||
| 1 | Logo:Klaus_Logo_Big | ||
| 1 | Logo:Klaus Logo_Small | ||
| 1 | 7SEGMENT_CA | Displays_7-Segment:7SegmentLED_LTS6760_LTS6780 | U2 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Conn_01x05_Female | Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mm | J2 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | ICSP1 |
| 1 | Crystal | Crystals:Crystal_HC49-4H_Vertical | 20MHZ1 |
| 1 | R | Resistors_SMD:R_1206_HandSoldering | 10K1 |
| 1 | SW_Push | Buttons_Switches_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_OTG | Libary:USB_Micro_Conn_Reichelt | J1 |
Questions
How big is the PcbTest PCB?
It measures 55.9 × 31.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PcbTest use?
22 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PcbTest KiCad files?
From the EagleEyeElite/pcbTest repository on GitHub, at the commit this page was made from: the board is board/pcbTest.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PcbTest design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm
- 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT