

Sound sensor
Misc smart house hardware
- Size
- 96.5 × 45.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 50
- Pads
- 202
- Tracks, vias
- 396, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
Sound sensor is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 96.5 × 45.7 mm with 87 parts on 50 nets, routed with 396 tracks and 5 vias.
It is built around the LM2904, L78L12ACU and LM2903, with the MMBT3904 among its other parts. Its parts include 35 resistors, 27 capacitors, 6 connectors, 4 diodes and 3 ICs. It belongs with the audio and music and sensors and measurement boards of this library.
Main components
4LM2904
SOP-8-15V~-1.5V、1.5V~15V 0℃~+70℃ 1MHz 2 2mV 3V~30V 3nA 40mA 45nA 500uA 85dB SOP-8 Operational Amplifier ROHSGOODWORKOperational AmplifierL78L12ACU
SOT-89-30℃~+125℃ 1 100mA 12V 35V 42dB@(120Hz) 6mA 80uV Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLM2903
SOP-8-18V~-1V、1V~18V 0℃~+70℃ 10mV 1mV 2 25nA 2V~36V 36V 400uA 5nA DTL、TTL、CMOS、ECL、MOS Open Collector SOP-8 Comparators ROHSHXY MOSFETComparatorsMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0,1 | Capacitors_SMD:C_1206_HandSoldering | C1, C4, C5, C9, C12, C17, C20, C21, C22 |
| 6 | 100,0 | Capacitors_SMD:CP_Elec_6.3x5.3 | C2, C16, C19, C23, C24, C27 |
| 6 | 200k | Resistors_SMD:R_1206_HandSoldering | R5, R8, R9, R20, R21, R26 |
| 5 | 10,0 | Capacitors_SMD:C_0805_HandSoldering | C3, C8, C13, C14, C18 |
| 5 | 20k | Resistors_SMD:R_1206_HandSoldering | R6, R19, R23, R24, R25 |
| 4 | - | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 4 | 1k | Resistors_SMD:R_1206_HandSoldering | R4, R13, R30, R33 |
| 4 | 47k | Resistors_SMD:R_1206_HandSoldering | R3, R11, R18, R27 |
| 3 | 100 | Resistors_SMD:R_1206_HandSoldering | R12, R15, R17 |
| 2 | 0,33 | Capacitors_SMD:C_1206_HandSoldering | C25, C26 |
| 2 | 100k | Resistors_SMD:R_1206_HandSoldering | R2, R28 |
| 2 | 10k | Potentiometers:Potentiometer_Triwood_RM-065 | RV3, RV4 |
| 2 | 16k | Resistors_SMD:R_1206_HandSoldering | R10, R16 |
| 2 | 1m | Potentiometers:Potentiometer_Triwood_RM-065 | RV1, RV2 |
| 2 | 1n4148 | Diodes_SMD:D_MiniMELF_Handsoldering | D2, D3 |
| 2 | 2,2k | Resistors_SMD:R_1206_HandSoldering | R31, R32 |
| 2 | 22k | Resistors_SMD:R_1206_HandSoldering | R1, R29 |
| 2 | 390k | Resistors_SMD:R_1206_HandSoldering | R7, R22 |
| 2 | 470 | Capacitors_SMD:C_0805_HandSoldering | C7, C15 |
| 2 | 56 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal | R34, R35 |
| 1 | +24 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | 0,022 | Capacitors_SMD:C_0805_HandSoldering | C11 |
| 1 | 0,047 | Capacitors_SMD:C_0805_HandSoldering | C10 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R14 |
| 1 | 157УП2 | Housings_DIP:DIP-14_W7.62mm_Socket_LongPads | D1 |
| 1 | 33,0 | Capacitors_SMD:CP_Elec_6.3x5.3 | C6 |
| 1 | InL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | InR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | L78L12 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | LED_BGRA | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D4 |
| 1 | LM2903 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U2 |
| 1 | LM2904 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Level | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Link | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | OutL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | OutR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | PwrL | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | PwrR | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
More from dzavalishin/hardware
12- 2 layers

- 2 layers156.2 × 86.4 mm

- 2 layers

- 2 layers124.5 × 81.3 mm

- 2 layers254 × 55.9 mm

- 2 layers71 × 140 mm

- 2 layers106.7 × 58.4 mm

- 2 layers108 × 77.5 mm

- 2 layers68.9 × 118.5 mm

- 2 layers155 × 58 mm

- 2 layers90.2 × 72.4 mm

- 2 layers20.3 × 200.7 mm

Similar boards
- 4 layers26 × 12.7 mm

Quadcopter ESC v2
ckflight/ESC-BLDC-HARDWARE
BLDC 3 phase motor speed controller hardware design working with open source BLHeli_S firmware.
74 parts108 - 4 layers229 × 157 mm

- 2 layers119.4 × 83.8 mm

Solstrejf voiceboard core
KamikazeVildsvin/Solstrejf
4 voice analog sinewave drone oscillator with modmatrix
128 parts1GPL-3.0 - 4 layers64 × 40.4 mm

Saleae current sensor
zainahm3d/saleae-current-sensor
+-5A and +-40A isolated hall effect current sensor solution for saleae logic devices.
54 parts - 2 layers52 × 75 mm

- 2 layers100 × 50 mm

- 4 layers241.7 × 56.7 mm

- 4 layers94 × 52.1 mm

Stm32 ltc encoder
max-verem/stm32_ltc_encoder
STM32 based SMPTE Linear Timecode Generator/Reader, isolated input/output
50 parts3
Questions
How big is the Sound sensor PCB?
It measures 96.5 × 45.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sound sensor use?
87 parts, built around the LM2904, L78L12ACU, LM2903 and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sound sensor KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Sensors/sound_sensor/sound_sensor/sound_sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sound sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.