
Quadcopter ESC v2
ckflight/ESC-BLDC-HARDWARE
BLDC 3 phase motor speed controller hardware design working with open source BLHeli_S firmware.
STMicroelectronicsExtended
0℃~+125℃ 1 100mA 12V 35V 42dB@(120Hz) 6mA 80uV Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS
The L78L12ACU is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a SOT-89-3 package with 3 pins. 0℃~+125℃ 1 100mA 12V 35V 42dB@(120Hz) 6mA 80uV Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.
PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-89-3, from KiCad's library), ready for a KiCad board. 7,784 are in stock at JLCPCB (part C69601). 7 open-source boards in 6 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| DC Input voltage VI | VO = 12 to 15 V | max 35 V | 5 |
| Output current IO | max 100 mA | 5 | |
| Storage temperature range TSTG | min -65 · max 150 °C | 5 | |
| Operating junction temperature range TOP | L78LxxAC / L78LxxC | min 0 · max 125 °C | 5 |
| Thermal resistance junction-case (max) RthJC | SOT-89 | max 15 °C/W | 5 |
| Thermal resistance junction-ambient (max) RthJA | SOT-89; considering 6 cm² of copper Board heat-sink | max 55 °C/W | 5 |
| Output voltage VO | L78L12AC; TJ = 25 °C, VI = 19 V, IO = 40 mA | min 11.5 · typ 12 · max 12.5 V | 21 |
| Output voltage VO | L78L12AC; TJ = 0 to 125 °C, IO = 1 to 40 mA, VI = 14.5 to 27 V | min 11.4 · max 12.6 V | 21 |
| Output voltage VO | L78L12AC; TJ = 0 to 125 °C, IO = 1 to 70 mA, VI = 19 V | min 11.4 · max 12.6 V | 21 |
| Line regulation ∆VO | L78L12AC; VI = 14.5 to 27 V, TJ = 25 °C, IO = 40 mA | max 250 mV | 21 |
| Line regulation ∆VO | L78L12AC; VI = 16 to 27 V, TJ = 25 °C, IO = 40 mA | max 200 mV | 21 |
| Load regulation ∆VO | L78L12AC; IO = 1 to 100 mA, TJ = 25 °C, VI = 19 V | max 100 mV | 21 |
| Load regulation ∆VO | L78L12AC; IO = 1 to 40 mA, TJ = 25 °C, VI = 19 V | max 50 mV | 21 |
| Quiescent current Id | L78L12AC; TJ = 25 °C, VI = 19 V, IO = 40 mA | max 6.5 mA | 21 |
| Quiescent current Id | L78L12AC; TJ = 125 °C, VI = 19 V, IO = 40 mA | max 6 mA | 21 |
| Quiescent current change ∆Id | L78L12AC; IO = 1 to 40 mA, VI = 19 V, TJ = 0 to 125 °C | max 0.1 mA | 21 |
| Quiescent current change ∆Id | L78L12AC; VI = 16 to 27 V, IO = 40 mA, TJ = 0 to 125 °C | max 1.5 mA | 21 |
| Output noise voltage eN | L78L12AC; B = 10 Hz to 100 kHz, TJ = 25 °C, VI = 19 V, IO = 40 mA | typ 80 uV | 21 |
| Supply voltage rejection SVR | L78L12AC; VI = 15 to 25 V, f = 120 Hz, IO = 40 mA, TJ = 25 °C | min 37 · typ 42 dB | 21 |
| Dropout voltage Vd | L78L12AC; IO = 40 mA, TJ = 0 to 125 °C | typ 1.7 V | 21 |

ckflight/ESC-BLDC-HARDWARE
BLDC 3 phase motor speed controller hardware design working with open source BLHeli_S firmware.


KamikazeVildsvin/Solstrejf
4 voice analog sinewave drone oscillator with modmatrix

zainahm3d/saleae-current-sensor
+-5A and +-40A isolated hall effect current sensor solution for saleae logic devices.



Yes. The symbol is Pinmap_Generic:Regulator_Linear_1OUT_2GND_3IN and the footprint Package_TO_SOT_SMD:SOT-89-3, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-89-3, with 3 pins. Its footprint is drawn on this page.
STMicroelectronics publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C69601, with 7,784 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the 78L12 by UMW, the L78L12ABU by STMicroelectronics, the 78L12G-AB3-R by UTC and the CJ79L12 by Jiangsu Changjing Electronics Technology (CJ). Check their datasheets: a part that fits the footprint may still differ in its ratings.
7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.