2 layers
2 layers
Register
dzavalishin/hardware3Misc smart house hardware
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 162
- Pads
- 520
- Tracks, vias
- 611, 32
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
Register is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board with 75 parts on 162 nets, routed with 611 tracks and 32 vias.
It is built around the 74LS193P-E, 74LS00SC and 74LS04PC. Its parts include 17 resistors, 17 ICs, 16 capacitors, 16 diodes and 9 connectors.
Main components
3
74LS193P-E
DIP-1674LS Programmable divide ratio、Reset function、Cascade counter、Synchronous counting、Multi-mode counting DIP-16 Counters, Dividers ROHSRenesas ElectronicsCounters, Dividers
74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates
74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters
README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1k | Resistors_SMD:R_1206_HandSoldering | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 16 | LED | LEDs:LED_1206_HandSoldering | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 15 | 0,1 | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 10 | 74ALS241 | Housings_SOIC:SOIC-20W_7.5x12.8mm_Pitch1.27mm | U7, U8, U10, U11, U12, U13, U14, U15, U16, U17 |
| 4 | 74LS193 | Housings_DIP:DIP-16_W7.62mm_LongPads | U2, U3, U4, U5 |
| 2 | 74LS00 | Housings_DIP:DIP-14_W7.62mm_LongPads | U1, U6 |
| 1 | 10,0 | Capacitors_SMD:C_0805_HandSoldering | C16 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 74LS04 | Housings_DIP:DIP-14_W7.62mm_LongPads | U9 |
| 1 | Control | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J4 |
| 1 | InBus | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J6 |
| 1 | OutBusA | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J7 |
| 1 | OutBusB | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J5 |
| 1 | OutC | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J8 |
| 1 | SideIn | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Horizontal | J2 |
| 1 | ~Count | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J3 |
| 1 | ~Select | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | ~SideIn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J9 |
Questions
What parts does the Register use?
75 parts, built around the 74LS193P-E, 74LS00SC and 74LS04PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Register KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Devices/cpu/computer/register/register/register.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Register design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.
More from dzavalishin/hardware
12- 2 layers156.2 × 86.4 mm
- 2 layers
- 2 layers124.5 × 81.3 mm
- 2 layers254 × 55.9 mm
- 2 layers71 × 140 mm
- 2 layers106.7 × 58.4 mm
- 2 layers108 × 77.5 mm
- 2 layers68.9 × 118.5 mm
- 2 layers155 × 58 mm
- 2 layers90.2 × 72.4 mm
- 2 layers20.3 × 200.7 mm
Similar boards
- 2 layers299.2 × 180 mm
- 2 layers450 × 160 mm
- 2 layers299.2 × 180 mm
Cobra XP
ceteras/Cobra-XP
Derived from Cobra, an experimental board for testing all kind of mods.
452 parts5MIT - 2 layers221.5 × 149.5 mm
ZX1
misterblack1/zenith_zt1
Information gathered on the Zenith ZT-1 / ZT-10 / ZT-11 and ZTX/ZT-x-A variants
140 parts5 - 4 layers304.5 × 217.2 mm
Latest Full Backplane
Trilobyte-CPU/8-bit-computer
A DIY 8-bit computer built mostly with discrete logic chips
478 parts2 - 2 layers486 × 306.3 mm
- 4 layers298.9 × 270 mm
Dino v0 0 2
robertrico/dino-homebrew
A perfboard with the bus edge and the slot decode every DINO card repeats. Plug it into any of J1-J8 on the Rev 1.0 mainboard, pick the slot with one shunt, bodge the card on the grid.
239 parts - 2 layers
