

Mid cpu mega32
Misc smart house hardware
- Size
- 155 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 89
- Pads
- 304
- Tracks, vias
- 689, 45
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Oct 2017
- Updated
- 11 Oct 2023
Overview
Mid cpu mega32 is an open-source printed circuit board by dzavalishin, from the dzavalishin/hardware repository on GitHub. It is a 2-layer board of 155 × 58 mm with 93 parts on 89 nets, routed with 689 tracks and 45 vias.
It is built around the ATMEGA32-16PU, MAX485ED and LTV-817S, with the UC3842N, PZT2222A and IRFR024N among its other parts. Its parts include 35 resistors, 23 capacitors, 12 diodes, 7 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA32-16PU
PDIP-40-40℃~+85℃ 10bit 16MHz 1KB 2KB 32 32KB 4.5V~5.5V 8 Bit AVR Built-in FLASH PDIP-40 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsLTV-817S
SMD-4P-55℃~+110℃ 1 1.2V 100mV@20mA,1mA 200mW 35V 3us 4us 50% 50mA 50mA 5kV 600% 6V DC Phototransistor SMD-4P Transistor, Photovoltaic Output Optoisolators ROHSLite-OnTransistor, Photovoltaic Output OptoisolatorsUC3842N
DIP-80℃~+70℃ 10V~30V 1A 1W 52kHz 97% Isolation PWM Modulation Primary-side feedback Under Voltage Protection、Over Current Protection、Soft-start、Under-voltage lockout DIP-8 AC-DC Controllers and Regulators ROHSHGSEMIAC-DC Controllers And RegulatorsPZT2222A
SOT-223-55℃~+150℃ 1 NPN 1.5W 10nA 300MHz 300mV 35 40V 600mA 6V NPN SOT-223 Bipolar (BJT) ROHSonsemiBipolar (BJT)IRFR024N
TO-252-55℃~+175℃ 1 N-channel 1.9nF 2.5V 25A 30nC@30V 33mΩ@10V 50W 60V 95pF TO-252 MOSFETs ROHSTECH PUBLICMOSFETsRS-5
Through hole- Lack of specifications ROHSVishay IntertechnologyUncategorised
README
README.mdhardware
Misc smart house hardware, kicad designs.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0,1 | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C5, C7, C9, C11, C12, C17, C18 |
| 8 | 1N5822 | Diodes_SMD:D_SMA | D4, D5, D6, D7, D8, D10, D13, D14 |
| 7 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R7, R8, R9, R10, R11, R12 |
| 6 | 1k | Resistors_SMD:R_0805_HandSoldering | R13, R26, R31, R32, R33, R34 |
| 5 | 2,2k | Resistors_SMD:R_0805_HandSoldering | R2, R3, R4, R5, R6 |
| 5 | 3,3k | Resistors_SMD:R_1206_HandSoldering | R17, R18, R19, R23, R27 |
| 4 | LTV-817S | Housings_SOIC:SO-4_7.6x3.6mm_Pitch2.54mm | U3, U5, U6, U7 |
| 3 | 470uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C10, C16, C19 |
| 2 | 18 | Capacitors_SMD:C_1206_HandSoldering | C3, C4 |
| 2 | 22 | Resistors_SMD:R_1206_HandSoldering | R21, R22 |
| 2 | 22uF | Capacitors_SMD:CP_Elec_6.3x4.5 | C8, C21 |
| 2 | PZT2222A | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2 |
| 1 | 0,55 1W | Resistors_SMD:R_2512_HandSoldering | R29 |
| 1 | 100k | Resistors_SMD:R_0805_HandSoldering | R35 |
| 1 | 100pF | Capacitors_SMD:C_0805_HandSoldering | C15 |
| 1 | 100uH | dz_lib:cd54 | L1 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R24 |
| 1 | 10n | Capacitors_SMD:C_0805_HandSoldering | C22 |
| 1 | 150k | Resistors_SMD:R_1206_HandSoldering | R20 |
| 1 | 16MHz | Crystals:Crystal_HC49-U_Horizontal | Y1 |
| 1 | 1k | Resistors_SMD:R_1206_HandSoldering | R25 |
| 1 | 1k5 1W | Resistors_SMD:R_2512_HandSoldering | R15 |
| 1 | 20k | Resistors_SMD:R_1206_HandSoldering | R28 |
| 1 | 220,0 | Capacitors_SMD:CP_Elec_6.3x5.8 | C6 |
| 1 | 2n2 | Capacitors_SMD:C_0805_HandSoldering | C23 |
| 1 | 3n3 100v | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C14 |
| 1 | 470 | Capacitors_SMD:C_0805_HandSoldering | C24 |
| 1 | 470 | Resistors_SMD:R_1206_HandSoldering | R16 |
| 1 | 470 100v | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C20 |
| 1 | 560 | Resistors_SMD:R_1206_HandSoldering | R14 |
| 1 | 5v6 | Diodes_SMD:D_MiniMELF_Handsoldering | D9 |
| 1 | 750 1W | Resistors_SMD:R_2512_HandSoldering | R30 |
| 1 | ATMEGA32-16PU | Housings_DIP:DIP-40_W15.24mm_LongPads | U1 |
| 1 | Addr | Socket_Strips:Socket_Strip_Straight_2x04_Pitch2.54mm | J4 |
| 1 | Bottom | Socket_Strips:Socket_Strip_Straight_2x06_Pitch2.54mm | J3 |
| 1 | EE16_24_05_Transformer | dz_lib:EE16_Transformer | T1 |
| 1 | Fail LED | LEDs:LED_RGB_1210 | D2 |
| 1 | IO LED | LEDs:LED_RGB_1210 | D1 |
| 1 | IRFR024N | TO_SOT_Packages_SMD:TO-252-2 | Q3 |
| 1 | JTAG | Socket_Strips:Socket_Strip_Straight_2x05_Pitch2.54mm | J2 |
| 1 | MAX485E | Housings_SOIC:SO-8_5.3x6.2mm_Pitch1.27mm | U2 |
| 1 | RS+5 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |
| 1 | RS-5 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2 |
| 1 | RX | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP3 |
| 1 | TL431LP | TO_SOT_Packages_THT:TO-92_Molded_Narrow | D11 |
| 1 | TX | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP5 |
| 1 | Top | Socket_Strips:Socket_Strip_Straight_2x05_Pitch2.54mm | J1 |
| 1 | TxE | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP4 |
| 1 | UC3842 | Housings_DIP:DIP-8_W7.62mm_LongPads | U4 |
| 1 | dcdc5v | dz_lib:dcdc5v | M1 |
More from dzavalishin/hardware
12- 2 layers

- 2 layers156.2 × 86.4 mm

- 2 layers

- 2 layers124.5 × 81.3 mm

- 2 layers254 × 55.9 mm

- 2 layers71 × 140 mm

- 2 layers106.7 × 58.4 mm

- 2 layers108 × 77.5 mm

- 2 layers68.9 × 118.5 mm

- 2 layers90.2 × 72.4 mm

- 2 layers20.3 × 200.7 mm

- 2 layers99.1 × 48.3 mm

Similar boards
- 4 layers53.5 × 53 mm

- 4 layers71.9 × 91 mm

Klipper
tobetter/3DPrinterShield
"3D Printer Shield" is a board to run 3D printer using ODROID single board computer, technically this board is designed to control the motor driver modules with TMC2209 (UART) or TMC2130 (SPI) through the on-board GPIO…
111 parts4GPL-3.0 - 2 layers100 × 99.8 mm

Pre Ignition
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
152 parts19 - 2 layers157.3 × 86 mm

- 2 layers

- 2 layers206.1 × 150.5 mm

- 2 layers33 × 84.9 mm

- 2 layers

ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT
Questions
How big is the Mid cpu mega32 PCB?
It measures 155 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mid cpu mega32 use?
93 parts, built around the ATMEGA32-16PU, MAX485ED, LTV-817S and UC3842N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mid cpu mega32 KiCad files?
From the dzavalishin/hardware repository on GitHub, at the commit this page was made from: the board is _Boards/smart_relay_controller/mid_cpu_mega32/mid_cpu_mega32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mid cpu mega32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dzavalishin before reusing the design.