2 layers43.2 × 17.6 mm
2 layers133.4 × 96.1 mm
Raise left
Dygmalab/raise-leftLicensed under CERN-OHL and distributed as is without any additional warranty or documentation.
- Size
- 133.4 × 96.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 398
- Nets
- 129
- Pads
- 1,017
- Tracks, vias
- 5,970, 659
- Pours
- 36
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170922)
- Created
- 16 Apr 2019
- Updated
- 23 Nov 2020
Overview
Raise left is an open-source printed circuit board by Dygmalab, from the Dygmalab/raise-left repository on GitHub. It is a 2-layer board of 133.4 × 96.1 mm with 398 parts on 129 nets, routed with 5,970 tracks and 659 vias.
It is built around the USBLC6-4. Its parts include 36 capacitors, 32 switches, 31 diodes, 8 resistors and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdraise-left
Left side PCB of the Dygma Raise keyboard
Licensed under CERN-OHL and distributed as is without any additional warranty or documentation.
Usefull links
Parts
398| Qty | Value | Footprint | References |
|---|---|---|---|
| 173 | AUTO_VIA | VIA_MATRIX | V10_32, V10_37, V11_19, V11_24, V11_29, V11_30, V11_35, V11_36, V11_37, V13_9, V13_35, V13_37, V14_33, V14_36, V15_35, V15_36 +157 |
| 32 | reverse 4 pin RGB led, com anode | raise_fp:3528-4p-rev | rgb1, rgb2, rgb10, rgb11, rgb12, rgb13, rgb14, rgb15, rgb16, rgb17, rgb18, rgb19, rgb22, rgb23, rgb24, rgb25 +16 |
| 31 | small signal diode, 100mA | raise_fp:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D22, D23, D24, D25 +15 |
| 30 | 4 pin RGB led, com anode | raise_fp:3528-4p | rgb35, rgb36, rgb37, rgb38, rgb39, rgb40, rgb41, rgb42, rgb43, rgb44, rgb45, rgb46, rgb47, rgb48, rgb49, rgb50 +14 |
| 27 | kailh hot plug sockets | raise_fp:kailhsocket-cherry | SW1, SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW22, SW23, SW24, SW25, SW27, SW28 +11 |
| 25 | 1nF ceramic, 100v, 10% | raise_fp:C_0603 | C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27 +9 |
| 8 | 0.1uF, ceramic, 10v, 10%, x5r | raise_fp:C_0603 | C2, C3, C6, C7, C8, C9, C10, C11 |
| 6 | 0R, 125mW, 5% | raise_fp:R_0603 | R1, R4, R5, R8, R13, R30 |
| 6 | via | fp:via | via1, via2, via3, via4, via5, via6 |
| 5 | 0R, 125mW, 5% | raise_fp:R_Array_Convex_4x0402 | RN1, RN2, RN3, RN4, RN5 |
| 5 | kailh hot plug sockets | raise_fp:kailhsocket-cherry-left-joint | SW7, SW13, SW19, SW26, SW31 |
| 4 | CONN_01X01 | raise_fp:MountingHole_2.2mm_Pad | P1, P2, P3, P4 |
| 3 | 10k, 125mW, 5% | raise_fp:R_0603 | R_ANSI_1, R2, R7 |
| 2 | 10uF, ceramic, 10v, 10%, x5r | raise_fp:C_0603 | C4, C5 |
| 2 | 5.1k, 125mW, 5% | raise_fp:R_0603 | R3, R6 |
| 2 | CONN_01X01 | raise_fp:Fiducial_0.5mm_Dia_1mm_Outer | F1, F2 |
| 2 | CONN_01X01 | raise_fp:MountingHole_4.3mm | T1, T2 |
| 2 | inductor 470R at 100M, 1A | raise_fp:R_0603 | L1, L2 |
| 1 | +5V | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP5 |
| 1 | +5VA | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP7 |
| 1 | 47uF, tantalum, 10v, 10%, ESR 1.6R | raise_fp:CP_EIA-3528-21_Kemet-B | C1 |
| 1 | ATTINY48-QFN | raise_fp:QFN-32_5x5mm_Pitch0.5mm | IC1 |
| 1 | CC | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP6 |
| 1 | COL0 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP9 |
| 1 | COL1 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP10 |
| 1 | COL2 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP11 |
| 1 | COL3 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP12 |
| 1 | COL4 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP13 |
| 1 | COL5 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP14 |
| 1 | COL6 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP15 |
| 1 | COL7 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP16 |
| 1 | CONN_02X03 | raise_fp:icsp-2.54-smt | P8 |
| 1 | EMI_Filter_CommonMode | raise_fp:choke | FL1 |
| 1 | FPC 10 way connector, 0.5mm pitch, right angle, bottom contact | raise_fp:FPC_10_2046 | lp1 |
| 1 | G*** | raise_fp:dygma-small | svg2mod |
| 1 | GATE | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP8 |
| 1 | GND | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP4 |
| 1 | PA2 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP1 |
| 1 | PMOS, -3.6A, 0.02R | raise_fp:SOT-23 | Q1 |
| 1 | ROW0 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP17 |
| 1 | ROW1 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP18 |
| 1 | ROW2 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP19 |
| 1 | ROW3 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP20 |
| 1 | ROW7 | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP21 |
| 1 | SCL | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP3 |
| 1 | SDA | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP2 |
| 1 | SHUTDOWN | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP22 |
| 1 | SLED_CS | raise_fp:Measurement_Point_Round-SMD-Pad_Small | TP23 |
| 1 | USB_C_Receptacle_16pin | raise_fp:usb-c-16smt | J1 |
| 1 | sled1735 | raise_fp:QFN-46_EP_4.5x6.5_Pitch0.4mm | U2 |
| 1 | usblc6-4 | raise_fp:SOT-23-6 | U1 |
Questions
How big is the Raise left PCB?
It measures 133.4 × 96.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raise left use?
398 parts, built around the USBLC6-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raise left KiCad files?
From the Dygmalab/raise-left repository on GitHub, at the commit this page was made from: the board is raise-left.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raise left design in my own project?
Its repository states no licence, so its author keeps all rights: ask Dygmalab before reusing the design.
Similar boards
- 4 layers95 × 95 mm
Openmicro
conol-ai/openmicrokbd
Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org
88 parts154MIT - 2 layers56.1 × 35.8 mm
Lensmount v1
Jana-Marie/EF-S-Adapter
Hard- and Firmware to control different EF and EF-S lenses
35 parts139MIT - 4 layers197 × 71 mm
Arduino ads129x
OpenElectronicsLab/OpenHardwareExG
The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/
279 parts102 - 4 layers58 × 18 mm
- 2 layers128 × 77 mm
- 4 layers220 × 120 mm
Electricui arena
electricui/electricui-arena
Hardware for continuous integration testing of serial interfaces and microcontrollers
268 parts27MIT - 2 layers91.3 × 53.3 mm
