Skip to the content
2 layers61.5 × 34.3 mmDwtk ice u2, the printed circuit board in 3D

Dwtk ice u2

dwtk/dwtk-ice6

An USB-connected In-Circuit Emulator for dwtk.

Size
61.5 × 34.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
25
Pads
134
Tracks, vias
186, 2
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Dec 2019
Updated
7 Jan 2022

Overview

Dwtk ice u2 is an open-source printed circuit board by dwtk, from the dwtk/dwtk-ice repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 61.5 × 34.3 mm with 29 parts on 25 nets, routed with 186 tracks and 2 vias.

It is built around the ATMEGA8U2-AU and BC548. Its parts include 9 resistors, 6 connectors, 5 capacitors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

dwtk-ice

An USB-connected In-Circuit Emulator for dwtk.

Hardware

Schematics

dwtk-ice schematics

Bill of materials
IDDescriptionReichelt Item no.
U1ATtiny4313ATTINY 4313 PU
Q1BC548BBC 548B
Y1Crystal 20,000MHz20,0000-HC49U-S
D1, D2Zener diode 3,6VZF 3,6
LED1LED Red 5mmLED 5MM RT
LED2LED Green 5mmLED 5MM GN
C1Electrolytic capacitor 10uF/35VRAD 10/35
C2Multi-layer ceramic capacitor 100nFX7R-5 100N
C3, C4Ceramic capacitor 22pFKERKO 22P
R1, R2Carbon film resistor 1/4 W, 5%, 68 Ohm1/4W 68
R3Carbon film resistor 1/4 W, 5%, 2,2K Ohm1/4W 2,2K
R4, R5Carbon film resistor 1/4 W, 5%, 1,5K Ohm1/4W 1,5K
R6Carbon film resistor 1/4 W, 5%, 22K Ohm1/4W 22K
R7Carbon film resistor 1/4 W, 5%, 470 Ohm1/4W 470
USB1USB panel socket, type ARND 205-00660
H1 + H2Header pins 1x40SL 1X40G 2,54
 IC socket, 20-pinGS 20
 Prototype PCB 3cm x 7cm 

Prototype

dwtk-ice prototype front

dwtk-ice prototype back

DISCLAIMER

THIS PROJECT IS PROVIDED AS IS. USE IT AT YOUR OWN RISK. THIS DEVICE IS USB CONNECTED AND MAY DAMAGE YOUR COMPUTER.

The USB connections in the schematics are there just for reference, please check the actual pinout of your connector before assembling and/or using.

Parts

29
QtyValueFootprintReferences
4470RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R5, R8, R9
4MountingHoleMountingHole:MountingHole_2.2mm_M2_Pad_ViaH1, H2, H3, H4
21k5Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6, R7
222RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
222pCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC3, C4
2JST XH2P FemaleConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2, J3
1100nCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
110uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
116mhzCrystal:Crystal_HC49-U_VerticalY1
11uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC5
122kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1ATmega8U2-AUcustom-footprints:TQFP-32_7x7mm_P0.8mm_LongPadsU1
1AVR-ISP-10Connector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ5
1AVR-ISP-6Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalJ4
1BC548Package_TO_SOT_THT:TO-92_InlineQ1
1GreenLED_THT:LED_D3.0mmD2
1JumperConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ6
1RedLED_THT:LED_D3.0mmD1
1USB B FemaleConnector_USB:USB_B_Lumberg_2411_02_HorizontalJ1

More from dwtk/dwtk-ice

1
  • 2 layers68.6 × 39.4 mmDwtk ice mega, the printed circuit board in 3D

    Dwtk ice mega

    dwtk/dwtk-ice

    An USB-connected In-Circuit Emulator for dwtk.

    34 parts6GPL-2.0

Similar boards

  • 4 layers63 × 35.6 mmKibot variants arduprog, the printed circuit board in 3D

    Kibot variants arduprog

    INTI-CMNB/kibot_variants_arduprog

    A test/example of how to use KiBot assembly variants

    47 parts9MIT
  • 2 layers310 × 35 mmTrace, the printed circuit board in 3D

    Trace

    chanulee/lovelace-ruler

    LOVELACE PCB ruler: 55x25 mm reference ruler, KiCad + Figma silkscreen

    100 partsCC-BY-SA-4.0
  • 2 layers125.7 × 64.9 mmSnowBOARD, the printed circuit board in 3D

    SnowBOARD

    egeozgul/SnowBOARD

    Key features include an integrated SD card slot for data storage, a comprehensive battery power management circuit for portable applications, a USB Type-C interface for modern connectivity, and a built-in USB-to-UART…

    85 parts
  • 4 layers265 × 171.4 mmT1-panel, the printed circuit board in 3D

    T1-panel

    INTI-CMNB/kibot_variants_arduprog_site

    Example of KiBot navigate results deployment using --quick-start

    1,163 parts
  • 2 layers59.4 × 37.1 mmProgrammateur, the printed circuit board in 3D

    Programmateur

    mot-prog/avr-programmer

    Custom In-System Programmer (ISP) for AVR microcontrollers. Built from scratch with an ATmega16U2, LUFA, and libusb.

    29 partsMIT
  • 2 layers25 × 28 mmSerial light pro, the printed circuit board in 3D

    Serial light pro

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    20 parts253GPL-3.0
  • 2 layers17.5 × 107.3 mmUsb to midi, the printed circuit board in 3D

    Usb to midi

    rafaelmartins/eurorack

    Designing and building an Eurorack synthesizer at home.

    22 parts2
  • 2 layers100 × 54 mmArduinoMega2560, the printed circuit board in 3D

    ArduinoMega2560

    muhardianab/ArduinoMega2560

    Making a new Arduino Mega 2560 Board

    73 parts

Questions

How big is the Dwtk ice u2 PCB?

It measures 61.5 × 34.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dwtk ice u2 use?

29 parts, built around the ATMEGA8U2-AU and BC548. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dwtk ice u2 KiCad files?

From the dwtk/dwtk-ice repository on GitHub, at the commit this page was made from: the board is hardware/dwtk-ice-u2/dwtk-ice-u2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dwtk ice u2 design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).