

SnowBOARD
Key features include an integrated SD card slot for data storage, a comprehensive battery power management circuit for portable applications, a USB Type-C interface for modern connectivity, and a built-in USB-to-UART…
- Size
- 125.7 × 64.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 78
- Pads
- 433
- Tracks, vias
- 1,268, 98
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 3 Oct 2023
- Updated
- 7 Jul 2025
Overview
SnowBOARD is an open-source printed circuit board by egeozgul, from the egeozgul/SnowBOARD repository on GitHub. It is a 2-layer board of 125.7 × 64.9 mm with 85 parts on 78 nets, routed with 1,268 tracks and 98 vias.
It is built around the ATMEGA2560-16AU and ATMEGA8U2-AU. Its parts include 22 resistors, 9 capacitors, 6 ICs, 5 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATMEGA8U2-AU
TQFP-32(7x7)16MHz 2.7V~5.5V 22 512Byte 8KB AVR FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
README
README.mdSnowBOARD
This open-source prototyping module streamlines embedded system development by eliminating soldering and complex wiring requirements. The module features dedicated connectors and ports that enable plug-and-play peripheral connections through simple socket interfaces, dramatically reducing setup time and complexity.
Key features include an integrated SD card slot for data storage, a comprehensive battery power management circuit for portable applications, a USB Type-C interface for modern connectivity, and a built-in USB-to-UART converter that simplifies debugging and firmware uploads. This design approach makes embedded prototyping more accessible while maintaining professional-grade functionality for developers at all skill levels.
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PWM_I/O1, PWM_I/O2, PWM_I/O3, PWM_I/O4, PWM_I/O5, PWM_I/O6, PWM_I/O7, PWM_I/O8, PWM_I/O9, PWM_I/O10 |
| 9 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | 3S_battery_pin1, Anemometer1, BNO55, Extra1, Extra2, extraSerial1, GPS1, Transceiver1, Windvane1 |
| 8 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 7 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9, R10, R11, R12, R13, R28 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R8, R15 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C12, C13 |
| 4 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C10, C11 |
| 4 | O | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | Cb1, Cb2, Cb3 |
| 3 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23, R24 |
| 3 | 3K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26, R27 |
| 3 | NCP1117-5.0_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3, U5, U6 |
| 3 | greenLED | LED_SMD:LED_0603_1608Metric_Castellated | D1, D2, D3 |
| 2 | 16mhz | Crystal:Crystal_HC49-U_Vertical | Crystal1, Crystal2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R14 |
| 2 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1, J2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | ATmega2560-16AU | Package_QFP:TQFP-100_14x14mm_P0.5mm | U4 |
| 1 | ATmega8U2-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | 2s_battery_pin1 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | 500ma1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J4 |
| 1 | NCP1117-3.3_TO252 | Package_TO_SOT_SMD:TO-252-2 | U7 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A | J3 |
Similar boards
- 2 layers100 × 54 mm

- 4 layers63 × 35.6 mm

Kibot variants arduprog
INTI-CMNB/kibot_variants_arduprog
A test/example of how to use KiBot assembly variants
47 parts9MIT - 2 layers310 × 35 mm

Trace
chanulee/lovelace-ruler
LOVELACE PCB ruler: 55x25 mm reference ruler, KiCad + Figma silkscreen
100 partsCC-BY-SA-4.0 - 4 layers265 × 171.4 mm

T1-panel
INTI-CMNB/kibot_variants_arduprog_site
Example of KiBot navigate results deployment using --quick-start
1,163 parts - 2 layers59.4 × 37.1 mm

Programmateur
mot-prog/avr-programmer
Custom In-System Programmer (ISP) for AVR microcontrollers. Built from scratch with an ATmega16U2, LUFA, and libusb.
29 partsMIT - 2 layers25 × 28 mm

Serial light pro
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
20 parts253GPL-3.0 - 2 layers61.5 × 34.3 mm

- 2 layers17.5 × 107.3 mm

Questions
How big is the SnowBOARD PCB?
It measures 125.7 × 64.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SnowBOARD use?
85 parts, built around the ATMEGA2560-16AU and ATMEGA8U2-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SnowBOARD KiCad files?
From the egeozgul/SnowBOARD repository on GitHub, at the commit this page was made from: the board is Design Files/snowBoard.kicad_pcb and its schematic Design Files/snowBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SnowBOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask egeozgul before reusing the design.