
Train set building light
dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

A place to keep all of the PCB things that don't fit in a project
Seq one output board is an open-source printed circuit board by dwilliams, from the dwilliams/pcb-things repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 50 × 170 mm with 42 parts on 35 nets, routed with 199 tracks and 10 vias.
Its parts include 25 resistors, 8 connectors, 4 capacitors, 3 diodes and 2 ICs.
A place to keep all of the PCB things that don't fit in a project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R13, R14, R15, R16 |
| 9 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R17, R18, R19, R20, R21, R22, R23, R24, R25 |
| 4 | 100K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10, R11, R12 |
| 4 | 100nF | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1, C2, C3, C4 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 2 | TL074 | Package_DIP:DIP-14_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | CV Lower Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J5 |
| 1 | CV Mix Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J7 |
| 1 | CV Upper Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | Gate Lower Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J6 |
| 1 | Gate Mix Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J8 |
| 1 | Gate Upper Out Jack | Connector_Audio:Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal | J4 |

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

dwilliams/pcb-things
A place to keep all of the PCB things that don't fit in a project

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 50 × 170 mm and has 2 copper layers, 1.6 mm thick.
42 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dwilliams/pcb-things repository on GitHub, at the commit this page was made from: the board is tmp-seq-one/seq-one-output-board/seq-one-output-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).