4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208
2 layers50.5 × 23.1 mm
FT232RL USBC V1.1
dvhai08/FT232RL_USB_CFT232RL Type C
- Size
- 50.5 × 23.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 40
- Pads
- 130
- Tracks, vias
- 165, 60
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Sep 2023
- Updated
- 11 Sep 2023
Overview
FT232RL USBC V1.1 is an open-source printed circuit board by dvhai08, from the dvhai08/FT232RL_USB_C repository on GitHub. It is a 2-layer board of 50.5 × 23.1 mm with 35 parts on 40 nets, routed with 165 tracks and 60 vias.
It is built around the FT232RL, AP2112K-3.3 and BSS84, with the SP0505BAHTG among its other parts. Its parts include 12 capacitors, 9 resistors, 4 diodes, 4 connectors and 3 ICs.
Main components
4
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
SP0505BAHTG
SOT-23-610A@8/20us 15V 1uA 35pF 5.5V 6V ESD IEC 61000-4-2、IEC 61000-4-4 SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdFT232RL_USB_C
FT232RL-based UART to USB Type-C adapter with support of 3V3
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C7, C9, C20, C31 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R9 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C6, C8, C19 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | IKY | haidv-library:LoGo12mm | U5 |
| 1 | Main Header | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | SP0505BAHT | Package_TO_SOT_SMD:SOT-23-6 | D4 |
| 1 | Sub Header | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | USB Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
Similar boards
- 2 layers
Caduceus
Embedded-Systems-Discord/1-Caduceus
A maker-friendly board with single pair ethernet both for power and for data, that will work with Arduino
89 parts10GPL-3.0 - 2 layers60 × 100 mm
- 2 layers35.1 × 62.7 mm
EMO SN65 OBD
darshanram008/EMO_OBD_tool
On board diagnostic tool for Battery management system
116 parts1 - 2 layers135.3 × 78.4 mm
Mseq
MF-Room/mseq_pcb
KiCad 10 hardware design for MSeq embedded, the microcontroller implementation of the MSeq MIDI sequencer.
93 parts1CERN-OHL-S-2.0 - 4 layers37.8 × 25 mm
- 4 layers100 × 100 mm
- 4 layers87 × 58 mm
Questions
How big is the FT232RL USBC V1.1 PCB?
It measures 50.5 × 23.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FT232RL USBC V1.1 use?
35 parts, built around the FT232RL, AP2112K-3.3, BSS84 and SP0505BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FT232RL USBC V1.1 KiCad files?
From the dvhai08/FT232RL_USB_C repository on GitHub, at the commit this page was made from: the board is Hardware/V1.1/FT232RL_USBC_V1.1.kicad_pcb and its schematic Hardware/V1.1/FT232RL_USBC_V1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FT232RL USBC V1.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dvhai08 before reusing the design.