2 layers121.9 × 121.9 mm
2 layers104.1 × 104.1 mm
Debugger
DutchMaker/DM-02148-bit computer built (almost) entirely out of TTL logic chips
- Size
- 104.1 × 104.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 99
- Pads
- 194
- Tracks, vias
- 745, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Sep 2019
- Updated
- 15 Jul 2022
Overview
Debugger is an open-source printed circuit board by DutchMaker, from the DutchMaker/DM-02 repository on GitHub. It is a 2-layer board of 104.1 × 104.1 mm with 11 parts on 99 nets, routed with 745 tracks and 24 vias.
Its parts include 2 connectors, 2 switches, 1 resistor and 1 diode. It belongs with the interfaces and adapters boards of this library.
README
README.mdDM-02 8-Bit Computer
Pronounced: "Dee-Em Zero Two"
An 8-bit computer built (almost) entirely out of TTL logic chips
This project started in September 2019 and is currently in progress.
Please refer to the documentation for the project status.
Start by reading the introduction
If you would like to see the computer in action, the best I can offer you now is the DM-02 Emulator while the electronic version is under development.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino Mega2560 | DM-02_8-Bit_Computer:Arduino_Mega2560_Shield | XA1 |
| 1 | BUS1 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | BUS2 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | POWER | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D1 |
| 1 | POWER | DM-02:Switch_DPST_Angled | SW2 |
| 1 | RESET | Button_Switch_THT:SW_Tactile_SKHH_Angled | SW1 |
More from DutchMaker/DM-02
3- 2 layers121.9 × 121.9 mm
Registers StackPointer
DutchMaker/DM-02
8-bit computer built (almost) entirely out of TTL logic chips
23 parts14 - 2 layers121.9 × 121.9 mm
Similar boards
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0
Questions
How big is the Debugger PCB?
It measures 104.1 × 104.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Debugger use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Debugger KiCad files?
From the DutchMaker/DM-02 repository on GitHub, at the commit this page was made from: the board is Circuits/KiCad/Debugger/Debugger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Debugger design in my own project?
Its repository states no licence, so its author keeps all rights: ask DutchMaker before reusing the design.