2 layers63.5 × 99.1 mm
2 layers37.1 × 8.6 mm
Nogasm
DunkelRatte/nogasm10This is a fork of the original nogasm project.
- Size
- 37.1 × 8.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 68
- Pads
- 213
- Tracks, vias
- 386, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 May 2017
- Updated
- 30 Mar 2021
Overview
Nogasm is an open-source printed circuit board by DunkelRatte, from the DunkelRatte/nogasm repository on GitHub. It is a 2-layer board of 37.1 × 8.6 mm with 60 parts on 68 nets, routed with 386 tracks and 30 vias.
It is built around the MCP6001R-I/OT, MP3V5050GP and WS2812B, with the LM7805CT, MMBT2222A and BUK92150-55A among its other parts. Its parts include 21 capacitors, 17 ICs, 8 resistors, 4 transistors and 2 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
7
MCP6001R-I/OT
SOT-23-5-40℃~+125℃ 1 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MP3V5050GP
SOT-1693-40℃~+125℃ 0Kpa~50Kpa 1ms 2.7V~3.3V On-chip temperature compensation Yes SOT-1693 Pressure Sensors ROHSNXP SemiconductorsPressure Sensors
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
LM7805CT
TO-2200℃~+70℃@(Ta) 1 1A 20V 2V@(1A) 40uV 5V 62dB@(120Hz) 8mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
BUK92150-55A
DPAK-55℃~+175℃ 1 N-channel 1.5V 11A 240pF 36W 40pF 55V 6nC@5V 97mΩ@10V DPAK MOSFETs ROHSNexperiaMOSFETs
MRA4004T3G-MS
SMA-55℃~+125℃ 1 Independent 1.1V@1A 1A 30A 400V SMA Diodes - General Purpose ROHSMSKSEMIDiodes - General Purpose
README
README.mdNogasm
This is a fork of the original nogasm project.
Hardware
Board
You can order all of the above parts in one cart from Digikey
Aisler Kit
You can order PCBs and/or all parts as a single kit on Aisler
Power
You'll need 12V/1.5A DC power supply with a 2.5mm/5.5mm barreljack plug (or fitting to above bigger socket).
Vibrator
The case is designed for a RS-555 motor. Aliexpress lists several versions. You'll need to press a weight onto it.
Other 12V DC toys controlable with PWM and using up to 2A should work as well.
Plug
An inflatable buttplug is used for pressure detection. For example "Fanny Hill" by Seven Creations.
Software
Flashing the teensy
Install the Teensy Loader Application. After There are two ways to get the firmware onto the device:
Flashing the compiled .hex
This is the easiest way. Download the .hex file and use the loader to upload the file to the device.
Compiling the code yourself
Download and install Teensyduino. Afterwards get the sourcecode, compile and upload it via the arduino IDE.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C14, C15, C16 |
| 13 | WS2812B | nogasm:WS2812B | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13 |
| 3 | 0.01uF | Capacitors_SMD:C_0805_HandSoldering | C17, C19, C20 |
| 3 | MMBT2222A | TO_SOT_Packages_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R1, R7 |
| 2 | 10uF | Capacitors_SMD:C_1210_HandSoldering | C13, C18 |
| 2 | 180 | Resistors_SMD:R_0805_HandSoldering | R5, R6 |
| 2 | 750 | Resistors_SMD:R_0805_HandSoldering | R2, R3 |
| 1 | 0.33uF | Capacitors_SMD:C_0805_HandSoldering | C21 |
| 1 | 10k | Potentiometers:Potentiometer_Trimmer_Vishay_TS53YL | RV1 |
| 1 | 15k | Resistors_SMD:R_0805_HandSoldering | R8 |
| 1 | 300 | Resistors_SMD:R_0805_HandSoldering | R4 |
| 1 | BUK92150-55A | TO_SOT_Packages_SMD:TO-252-3_TabPin2 | Q1 |
| 1 | DC Jack PJ-031DH 3.5mm | nogasm:Barreljack_3mm | J1 |
| 1 | DC Jack PRT-10811 | nogasm:Barreljack_5.4mm | J2 |
| 1 | LM7805CT | TO_SOT_Packages_THT:TO-220_Horizontal | U15 |
| 1 | LOGO | nogasm:github | G*** |
| 1 | MCP6001R | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U17 |
| 1 | MP3V5050GP | nogasm:MP3V5050GP | U16 |
| 1 | MRA4004T3G | nogasm:D_SMA_0202 | D1 |
| 1 | Rotary_Encoder_Switch_RGB | nogasm:COM-10982 | Encoder |
| 1 | SW_DIP_x04 | nogasm:SW_DIP_4_SMD | SW1 |
| 1 | Teensy-LC | nogasm:Teensy30_31_32_LC | U14 |
The 57 most common of 60 parts.
Questions
How big is the Nogasm PCB?
It measures 37.1 × 8.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nogasm use?
60 parts, built around the MCP6001R-I/OT, MP3V5050GP, WS2812B and LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nogasm KiCad files?
From the DunkelRatte/nogasm repository on GitHub, at the commit this page was made from: the board is nogasm.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nogasm design in my own project?
Its repository states no licence, so its author keeps all rights: ask DunkelRatte before reusing the design.
Similar boards
- 2 layers114.2 × 98.8 mm
Sphygmomanometer
fedecastellaro/AD7124-4-Implementation
AD7124-4 - 24-Bit ADC, 4-Channel , Sigma-Delta - PCB and software implementation
36 parts5 - 2 layers100 × 100 mm
- 4 layers54.6 × 86.4 mm
- 4 layers111.8 × 59.1 mm
ControleurPulve
Mobilab-AgroTIC/debitdouille
Système pour controler le fonctionnement d'un pulvérisateur
107 parts - 2 layers60.3 × 106.5 mm
TiNRS Wobbler2
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
181 parts87MIT - 4 layers91.7 × 69.6 mm
- 2 layers82.5 × 102.9 mm
