2 layers83.2 × 72.1 mm
2 layers84.1 × 72.8 mm
SmartEffector
Duet3D/SmartEffector26Smart Effector for delta printers.
- Size
- 84.1 × 72.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 47
- Pads
- 172
- Tracks, vias
- 561, 26
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Sep 2017
- Updated
- 20 Jan 2025
Overview
SmartEffector is an open-source printed circuit board by Duet3D, from the Duet3D/SmartEffector repository on GitHub. It is a 2-layer board of 84.1 × 72.8 mm with 64 parts on 47 nets, routed with 561 tracks and 26 vias.
It is built around the LDK130M28RY. Its parts include 19 resistors, 8 capacitors, 7 connectors, 5 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
READMEThe Duet3d Smart Effector design files repository.
See https://www.duet3d.com/DeltaSmartEffector for more information and to purchase a smart effector.
Duet3d Delta Smart Effector Design by Tony Lock and David Crocker LICENSE: see the LICENSE file in the repository Documentation: https://docs.duet3d.com/Duet3D_hardware/Accessories/Smart_Effector Discussion: https://www.duet3d.com/forum/
Developed in KiCAD: http://www.kicad-pcb.org/display/KICAD/KiCad+EDA+Software+Suite
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | M_2.9mm | complib:MountingHole_2.9mm | M3, M4, M5, M6, M7, M8, M9, M10, M11 |
| 6 | 100R | Resistor_SMD:R_2512_6332Metric | R20, R21, R23, R24, R25, R26 |
| 4 | 5K1 | Resistor_SMD:R_0402_1005Metric_Wbry | R3, R4, R7, R11 |
| 3 | 10n | Capacitor_SMD:C_0402_1005Metric_Wbry | C2, C7, C8 |
| 3 | illum | complib:LED_Wurth-158302260 | D1, D7, D9 |
| 2 | 10K_1% | Resistor_SMD:R_0402_1005Metric_Wbry | R13, R14 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Wbry | C3, C4 |
| 2 | FID | complib:Fiducial_1mm_Dia_2.54mm_Outer_CopperTop | M1, M2 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric_Wbry | C1 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric_Wbry | R1 |
| 1 | 12mm | complib:12mmHole | M16 |
| 1 | 140R_0.33W+ | complib:R_0805_extended_pads | R8 |
| 1 | 150R | Resistor_SMD:R_0402_1005Metric_Wbry | R2 |
| 1 | 1K0 | Resistor_SMD:R_0402_1005Metric_Wbry | R5 |
| 1 | 1K5_0.5W+ | complib:R_1206 | R6 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 22uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 330K | Resistor_SMD:R_0402_1005Metric_Wbry | R10 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric_Wbry | C5 |
| 1 | 604R_0.33W+ | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | ATtiny44A-MMH-PAD | complib:QFN-20-1EP_4x4mm_Pitch0.5mm | U2 |
| 1 | Comms | complib:LED_1206_bottom_entry_156120VS75000 | D3 |
| 1 | Duet3D Logo | complib:LOGO_Duet3d_CU_Mask | M15 |
| 1 | HEATER | complib:3.5MM_2X1 | P4 |
| 1 | Heat | complib:LED_1206_bottom_entry_156120VS75000 | D4 |
| 1 | Hotend Fan | complib:Microfit_01x02_43650-0227 | P9 |
| 1 | INPUT2 | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | P3 |
| 1 | Input 1 | complib:Microfit_02x03 | P8 |
| 1 | Jumper for 12V input | complib:JUMPER | JP3 |
| 1 | Jumpered for 2 Wire | complib:SJ_Bridged | JP1 |
| 1 | LDK130M28RY | complib:SOT-23-5L | U1 |
| 1 | MCP6286T-E/OT | complib:SOT-23-5L | U3 |
| 1 | NetTie-ADC0-Bottom | NetTie:NetTie-2_SMD_Pad0.25mm | NT1 |
| 1 | NetTie-Bottom-Amp | NetTie:NetTie-2_SMD_Pad0.5mm | NT2 |
| 1 | NetTie-Top-Amp | NetTie:NetTie-2_SMD_Pad0.5mm | NT3 |
| 1 | NetTie-Top-GND | NetTie:NetTie-2_SMD_Pad0.5mm | NT4 |
| 1 | PROG | complib:Test_Point_2x3 | P2 |
| 1 | Print Fan | Connector_Molex:Wurth_61900211121-1x02_P2.54mm_Vertical-(Molex_KK-254_AE-6410-02Acompatible) | P7 |
| 1 | Solder Jumper | complib:SJ_Bridged | JP2 |
| 1 | TEMP | complib:Microfit_01x02or04_43650-0227 | P5 |
| 1 | Ziptie | complib:Ziptie_small | M13 |
Questions
How big is the SmartEffector PCB?
It measures 84.1 × 72.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SmartEffector use?
64 parts, built around the LDK130M28RY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SmartEffector KiCad files?
From the Duet3D/SmartEffector repository on GitHub, at the commit this page was made from: the board is SmartEffector/SmartEffector_v3.0/SmartEffector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SmartEffector design in my own project?
Its repository states no licence, so its author keeps all rights: ask Duet3D before reusing the design.
More from Duet3D/SmartEffector
2- 2 layers83.2 × 72.1 mm
Similar boards
- 4 layers34 × 30 mm
Autorouted
tokla-chiya/VL53L9_KICAD
Open VL53L9.kicadpro in KiCad, then open VL53L9.kicadsch. The schematic is complete; the PCB is still empty and needs placement/routing.
32 parts - 2 layers76.5 × 120 mm
Numpad project
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
64 parts915 - 2 layers160 × 99.1 mm
Flat hierarchy
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
64 parts744MIT - 2 layers49 × 53.2 mm
DB25 External
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
64 parts459GPL-3.0 - 2 layers90 × 71 mm
- 2 layers28 × 30 mm
- 2 layers192.9 × 59.5 mm
Alpha pro micro
PyrooL/Alpha
A 28-key semi-ortholinear mechanical keyboard designed by PyroL
64 parts298MIT - 2 layers128 × 88 mm
Fireball revD
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
64 parts223