2 layers230.5 × 82 mm
Vitamins included
Duckle29/Vitamins-included
This repo holds a variation of the lets split. This board requires no soldering
214 parts49BSD-3-Clause
2 layers114.3 × 98.8 mm
Mystic split40
Duckle29/MS401The project uses Ai03s keyswitch library. Many thanks to Ai03 for releasing an awesome keyswitch library with an entirely open license.
- Size
- 114.3 × 98.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 135
- Pads
- 767
- Tracks, vias
- 1,056, 230
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Nov 2019
- Updated
- 3 Oct 2023
Overview
Mystic split40 is an open-source printed circuit board by Duckle29, from the Duckle29/MS40 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 114.3 × 98.8 mm with 160 parts on 135 nets, routed with 1,056 tracks and 230 vias.
It is built around the ATMEGA32U4-AU, BAV70 and PRTR5V0U2X, with the 1206L110THYR, CSTNE16M0VH3L000R0 and SJ-43514-SMT-TR among its other parts. Its parts include 32 diodes, 24 resistors, 16 connectors, 6 capacitors and 4 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BAV70
SOT-23-55℃~+150℃ 1 Pair Common Cathode 1.25V@150mA 2.5uA@70V 200mA 225mW 2A 6ns 70V SOT-23 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
1206L110THYR
1206-40℃~+85℃ 0.6mm 1.1A 100A 100ms 2.2A 210mΩ 40mΩ 800mW 8V 1206 Resettable Fuses ROHSLittelfuseResettable FusesCSTNE16M0VH3L000R0
SMD3213-3P-40℃~+85℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsSJ-43514-SMT-TR
SMD-20℃~+85℃ 12V 1A Brass、Copper alloy Silver SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
readme.mdView this project on CADLAB.io.
MS40
The project uses Ai03s keyswitch library. Many thanks to Ai03 for releasing an awesome keyswitch library with an entirely open license.
Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | MX-NoLED | Ai03-MX:MXOnly-1U-Hotswap | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX20, MX21, MX22, MX23, MX25 +32 |
| 24 | BAV70 | Package_TO_SOT_SMD:SOT-23_Handsoldering | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +8 |
| 10 | 220R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R8, R12, R13, R14, R18, R22, R23, R24 |
| 10 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R5, R6, R7, R11, R15, R16, R17, R21 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C4, C6 |
| 4 | 22R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R19, R20 |
| 4 | MX-NoLED | Ai03-MX:MXOnly-2U-Hotswap | MXB19, MXB24, MXB43, MXB48 |
| 4 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1, D2, D29, D30 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C5 |
| 2 | 1206L110THYR | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F2 |
| 2 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1, U2 |
| 2 | BAV70 | Diode_SMD:D_SOD-323_HandSoldering | D27, D31 |
| 2 | Buzzer_magnetic | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1, BZ3 |
| 2 | Buzzer_piezo | Buzzer_Beeper:Buzzer_Mallory_AST1109MLTRQ | BZ2, BZ4 |
| 2 | CSTNE16M0VH3L000R0 | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1, Y2 |
| 2 | EC11E | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2 |
| 2 | F1 | TestPoint:TestPoint_Pad_D1.0mm | J6, J9 |
| 2 | I2C pullup | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 2 | ISP | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J16, J34 |
| 2 | MISO | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP6 |
| 2 | MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP5 |
| 2 | RESET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15, J33 |
| 2 | RX | TestPoint:TestPoint_Pad_D1.0mm | J1, J3 |
| 2 | Red LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D28, D32 |
| 2 | Reset | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3, SW4 |
| 2 | SCK | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP4 |
| 2 | SJ-43514-SMT | CUI:SJ-43514-SMT | J18, J36 |
| 2 | TX | TestPoint:TestPoint_Pad_D1.0mm | J2, J5 |
| 2 | TYPE-C-31-M-12 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J7, J25 |
| 2 | WS2812 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J17, J35 |
| 1 | LOGO | graphics:kiwi10mm | G*** |
The 153 most common of 160 parts.
Questions
How big is the Mystic split40 PCB?
It measures 114.3 × 98.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mystic split40 use?
160 parts, built around the ATMEGA32U4-AU, BAV70, PRTR5V0U2X and 1206L110THYR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mystic split40 KiCad files?
From the Duckle29/MS40 repository on GitHub, at the commit this page was made from: the board is mystic_split40.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mystic split40 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers75 × 55 mm
Wellfed bench
Isaac-Duarte/wellfed
Open firmware that runs the PETLIBRO Granary PLAF103 pet feeder on your own Wi-Fi: no cloud, no account. Early and in testing.
93 parts8MIT - 4 layers58 × 48 mm
BatGizmo logger
jmears63/batgizmo-logger-kicad
Kicad files for the BatGizmo bat detector hardware.
94 parts5CERN-OHL-P-2.0 - 2 layers18 × 33.2 mm
Atmega328pb nano
skumlos/atmega328pb-nano
An Arduino Mini Pro clone using a Atmega328PB instead to have 2 I2C busses
22 parts4 - 2 layers24.1 × 33.3 mm
- 2 layers217.7 × 91.1 mm
- 2 layers285 × 94.6 mm
Nodu
swiftrax/Nodu
Universal sixty-percent mechanical keyboard with flex cutouts and minimal layouts. QMK / VIA supported
130 parts10CC0-1.0 - 2 layers166 × 70 mm
Prototype
SteveCooling/MidiKeys
Will be a complete board with decoders for multiplexed sampling of analog sources and up to 61-key keybeds
75 parts8MIT