2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers39.3 × 40.3 mm
Relay board
Duckle29/Basic-relay-boardA basic relay board for switching mains power, should handle 8A
- Size
- 39.3 × 40.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 24
- Tracks, vias
- 37, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Oct 2018
- Updated
- 10 Oct 2018
Overview
Relay board is an open-source printed circuit board by Duckle29, from the Duckle29/Basic-relay-board repository on GitHub. It is a 2-layer board of 39.3 × 40.3 mm with 10 parts on 9 nets, routed with 37 tracks and 0 vias.
Its parts include 3 connectors, 2 resistors, 1 diode, 1 transistor and 1 switch. It belongs with the home automation and IoT boards of this library.
README
README.mdBasic-relay-board
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 1n4007 | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | G2RL2ADC5 | Relay_THT:Relay_DPST_Schrack-RT2-FormA_RM5mm | K1 |
| 1 | LOGO | graphics:Kiwi-silk | G*** |
| 1 | Mains in | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J1 |
| 1 | Mains out | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J2 |
| 1 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
The 9 most common of 10 parts.
Questions
How big is the Relay board PCB?
It measures 39.3 × 40.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Relay board use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Relay board KiCad files?
From the Duckle29/Basic-relay-board repository on GitHub, at the commit this page was made from: the board is relay-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Relay board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Duckle29 before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0