

BindingPosts
A Custom 5.1 LM3886 Based Custom Amplifier
- Size
- 100 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 50
- Nets
- 33
- Pads
- 102
- Tracks, vias
- 202, 15
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 6 Jan 2023
- Updated
- 23 Feb 2025
Overview
BindingPosts is an open-source printed circuit board by duanestorey, from the duanestorey/hifi-amplifier repository on GitHub. It is a 2-layer board of 100 × 60 mm with 50 parts on 33 nets, routed with 202 tracks and 15 vias.
Its parts include 11 resistors, 8 connectors, 7 diodes, 5 switches and 5 inductors.
README
README.mdHifi-Amplifier
A Custom 5.1 LM3886 Based Custom Amplifier. The LM3886 has a somewhat mythical status ever since a $3,000 gaincard was released in 1999. It had amazing sound quality, but inside was only a tweaked LM3886 Texas Instrument 68W amplifier IC. Since then, an entire community has evolved around these 'gainclones', which truly are hi-fidelity. This project uses 5 of these, along with a Dolby Decoder IC, to create a complete DIY hi-fidelity 5.1 system.
A breakdown of the directory structure is as follows:
- PCBs - Each of the required PCBs in detail
- Code/ESP32 - The main amplifier code, written to run on an ESP32 WROOM 32 processor - currently a work in progress and incomplete as the code has recently been changed from a STM32
Design Philosophy
PCBs
After iterations over several months to determine PCB usefulness and sizes, most PCBs now utilize a 55mmx55mm size. This is under the minimum of 100mmx100mm low-cost options at several of the large-scale PCB manufacturing sites, and allows useful stacking of PCBs within the chassis.
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 |
| 5 | 1N4001 | Diode_SMD:D_SMA | D1, D2, D3, D4, D5 |
| 5 | Conn_01x02_Male | Connector_JST:JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical | J1, J2, J3, J4, J5 |
| 5 | G5Q-1 | Relay_THT:Relay_SPST_Omron-G5Q-1A | K1, K2, K3, K4, K6 |
| 4 | 0.5u | Components:929SQ-501JEC 500nh Air Core Inductor | L1, L2, L4, L5 |
| 4 | 6.8R | Resistor_SMD:R_4020_10251Metric_Pad1.65x5.30mm_HandSolder | R1, R2, R4, R5 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6, J7, J8 |
| 2 | 2SC1945 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q6 |
| 2 | 820R | Resistor_SMD:R_0603_1608Metric | R6, R12 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 10U | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1U | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 360R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 430R | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 538n | Components:929SQ-501JEC 500nh Air Core Inductor | L3 |
| 1 | 7.5R | Resistor_SMD:R_4020_10251Metric_Pad1.65x5.30mm_HandSolder | R3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D8 |
More from duanestorey/hifi-amplifier
12- 2 layers100 × 100 mm

- 2 layers95 × 55 mm

- 2 layers95 × 55 mm

- 2 layers55 × 95 mm

- 2 layers100 × 90 mm
/1.0/Streamer/Streamer.kicad_pcb.jpg?size=s&soon)
- 2 layers65 × 95 mm

- 4 layers95 × 55 mm

- 4 layers85 × 55 mm

- 2 layers55 × 55 mm

- 4 layers85 × 55 mm

- 4 layers65 × 55 mm
/2.0/ChannelSelector.kicad_pcb.jpg?size=s&soon)
- 2 layers55 × 95 mm

Similar boards
- 2 layers187.2 × 26.6 mm

- 2 layers45.7 × 25.9 mm

- 2 layers21 × 31.5 mm

- 2 layers42 × 32.5 mm

Lipoboard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
50 parts915 - 2 layers80 × 109.5 mm

NucDeck Right Controller PCB - Rev 1.2
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
50 parts561CERN-OHL-S-2.0 - 2 layers101 × 31.5 mm

- 2 layers123.9 × 94.4 mm

- 2 layers50 × 25 mm

Mbus master
roarfred/AmsToMqttBridge
Minimalistic system to read AMS/HAN data from electrical meter
50 parts223
Questions
How big is the BindingPosts PCB?
It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BindingPosts use?
50 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BindingPosts KiCad files?
From the duanestorey/hifi-amplifier repository on GitHub, at the commit this page was made from: the board is PCBs/1/BindingPosts/2.0/BindingPosts.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BindingPosts design in my own project?
Its repository states no licence, so its author keeps all rights: ask duanestorey before reusing the design.