Skip to the content
2 layers100 × 80 mmAddressing manual gnd, the printed circuit board in 3D

Addressing manual gnd

drtrigon/eagle1

Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

Size
100 × 80 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
37
Pads
217
Tracks, vias
293, 94
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
7 Apr 2018
Updated
17 Mar 2019

Overview

Addressing manual gnd is an open-source printed circuit board by drtrigon, from the drtrigon/eagle repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 80 mm with 37 parts on 37 nets, routed with 293 tracks and 94 vias.

It is built around the MC14585BD and MC14069UBD. Its parts include 16 resistors, 5 capacitors, 4 ICs and 4 switches.

Main components

2

README

README.md

Projekte

design rule check status PCB Build Status Build Status

Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo. See there and in .travis.yml for more info.

(might make sense to split projects off into separate repos/submodules)

N64TinyUSB

projects/N64TinyUSB/N64TinyUSB_HelveTiny_1.0.brd from EDRC.me

Order: make sure to select PCB Thickness 2mm and "Gold Fingers"!

based on boxtec.ch Helvetiny 1.0 PCB design:

code/firmware (design based on attiny45 n64-usb)

Built using the attiny45 n64-usb AVR source files. Works out of the box but emulates 1 device only (that contains both controller).

https://github.com/drtrigon/sketchbook/tree/master/cli/n64dual_tiny45

Hint: Order PCB directly

Upload the GERBER files below to https://jlcpcb.com/quote and order.

Drone_MultiWii / FlightController

projects/Drone_MultiWii/FlightController.brd from EDRC.me

arduino-papilio_1-WireSniffer_Rev1

projects/arduino-papilio_1-WireSniffer_Rev1/1-Wire_Sniffer_REV1.brd from EDRC.me

DACRackUnit

projects/DACRackUnit/reference-tee-16pin.brd from EDRC.me projects/DACRackUnit/power-supply.brd from EDRC.me projects/DACRackUnit/addressing-auto.brd from EDRC.me projects/DACRackUnit/reference-tee-15pin.brd from EDRC.me projects/DACRackUnit/addressing-nand.brd from EDRC.me projects/DACRackUnit/references-no-gnd-loop.brd from EDRC.me projects/DACRackUnit/addressing-manual-gnd.brd from EDRC.me projects/DACRackUnit/high-power-supply.brd from EDRC.me

Setup

I would like to use features like CI (continous integration) keep a copy/mirror on e.g. github and more.

Maintaining a copy/mirror (more precise: with 2 remotes overloaded origin) on GitHub also allows to use GitLab and GitHub together and by that all the nice featurs on GitHub. See also; https://steveperkins.com/migrating-projects-from-github-to-gitlab/

"Option 2: Overload Origin with Both Remotes (needs one single pull/push only)"; in order to clone and set this repo up use:

text
$ git clone file://///data/mount/gvfs/smb-share:server=.../01git/eagle.git
$ cd eagle
$ git remote set-url --add origin https://github.com/drtrigon/eagle.git

you can check the settings with:

text
$ git remote -v
origin  /data/mount/gvfs/smb-share:server=.../01git/eagle.git/ (fetch)
origin  /data/mount/gvfs/smb-share:server=.../01git/eagle.git/ (push)
origin  https://github.com/drtrigon/eagle.git (push)

Enable EDRC.ME for a Repository (for Eagle)

http://www.edrc.me/docs/

Enable Travis CI for a Repository (for Eagle)

https://github.com/drtrigon/test-eagle-edrc/blob/master/.travis.yml (does not work reliably yet)

Login to Travis-CI using the GitHub account and enable Travis-CI for the given repo.

Add a .travis.yml file to your project, commit, pull/push and enjoy.

A word of caution; the travis run will at the end - if successfull - try to push the results back to this repo.

Further Info

EDRC.me: https://michaelblouin.ca/blog/2018/02/25/automate-design-rule-checks-autodesk-eagle/

gerber (travis or local python script): http://www.rocketnumbernine.com/2011/12/14/automating-gerbers-from-eagle

text
...
# create top copper (cmp), bottom copper (sol), top solder mask (stc), bottom solder mask (sts), {top} silkscreen (plc)
${EAGLE} -X -dGERBER_RS274X -o${outputfile}.cmp ${board} Top Pads Vias
${EAGLE} -X -dGERBER_RS274X -o${outputfile}.sol ${board} Bottom Pads Vias
#${EAGLE} -X -dGERBER_RS274X -o${outputfile}.mil ${board} Milling
${EAGLE} -X -dGERBER_RS274X -o${outputfile}.plc ${board} Dimension tPlace tNames
${EAGLE} -X -dGERBER_RS274X -o${outputfile}.stc ${board} tStop
${EAGLE} -X -dGERBER_RS274X -o${outputfile}.sts ${board} bStop
#${EAGLE} -X -dGERBER_RS274X -o${outputfile}.crc ${board} tCream
#${EAGLE} -X -dGERBER_RS274X -o${outputfile}.dpv ${board} Drills
#${EAGLE} -X -dGERBER_RS274X -o${outputfile}.drh ${board} Holes
...

(mill and drill needs: gerb274x-mill-drill.cam)

Generate schematic, PCB and GERBER from KiCAD (TODO)

License

The content of this project itself is licensed under the Creative Commons Attribution 3.0 license, and the underlying source code used to format and display that content is licensed under the MIT license, see the LICENSE file for license rights and limitations (MIT).

Parts

37
QtyValueFootprintReferences
169k9addressing-manual-gnd:0207_12R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
5100nFaddressing-manual-gnd:C050-025X075C0, C1, C2, C3, C4
44pinsaddressing-manual-gnd:EDG-04SW0, SW1, SW2, SW3
4DIN-41651-10Paddressing-manual-gnd:DIN-41651-10PPORT0, PORT1, PORT2, PORT3
4MC14585addressing-manual-gnd:PDIP-16IC0, IC1, IC2, IC3
110uFaddressing-manual-gnd:B45181BCP0
1DIN-41651-20Paddressing-manual-gnd:DIN-41651-20PCPORT0
1MC14069addressing-manual-gnd:PDIP-14ICU0
1WAGO-3addressing-manual-gnd:WAGO-3SP1

More from drtrigon/eagle

8
  • 2 layers100 × 80 mmHigh power supply, the printed circuit board in 3D

    High power supply

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    41 parts1MIT
  • 2 layers100 × 80 mmAddressing nand, the printed circuit board in 3D

    Addressing nand

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    35 parts1MIT
  • 2 layers68.9 × 53.3 mm1-Wire Sniffer REV1, the printed circuit board in 3D

    1-Wire Sniffer REV1

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    34 parts1MIT
  • 2 layers100 × 80 mmPower supply, the printed circuit board in 3D

    Power supply

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    25 parts1MIT
  • 2 layers20.1 × 37.3 mmN64TinyUSB HelveTiny 1.0, the printed circuit board in 3D

    N64TinyUSB HelveTiny 1.0

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    24 parts1MIT
  • 2 layers100 × 80 mmReferences no gnd loop, the printed circuit board in 3D

    References no gnd loop

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    20 parts1MIT
  • 2 layers100 × 80 mmReference tee-15pin, the printed circuit board in 3D

    Reference tee-15pin

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    16 parts1MIT
  • 2 layers44.1 × 49.5 mmFlightController, the printed circuit board in 3D

    FlightController

    drtrigon/eagle

    Results of eagle and kicad CI from travis are stored in https://github.com/drtrigon/eagle/tree/result/pcb branch and linked/shown in https://github.com/drtrigon/sketchbook repo.

    9 parts1MIT

Similar boards

  • 2 layers40 × 34 mmDD HIP9011, the printed circuit board in 3D

    DD HIP9011

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    37 parts1.2k
  • 2 layers53.9 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    37 parts1kGPL-3.0
  • 2 layers52 × 51.8 mmEsp32-homeassistant rf bridge, the printed circuit board in 3D

    Esp32-homeassistant rf bridge

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    37 parts915
  • 2 layers87.8 × 59.8 mmFreeDeck SMD 2020-02, the printed circuit board in 3D

    FreeDeck SMD 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    37 parts772
  • 2 layers65 × 28 mmBMS Cell Module, the printed circuit board in 3D

    BMS Cell Module

    stuartpittaway/diyBMS

    Do it yourself battery management system for Lithium ion battery packs/cells

    37 parts676GPL-3.0
  • 2 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    37 parts575GPL-2.0
  • 2 layers38.1 × 153.7 mmDEFOG PANEL, the printed circuit board in 3D

    DEFOG PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    37 parts431
  • 2 layers47.8 × 27.4 mmVsf stm32h7b0, the printed circuit board in 3D

    Vsf stm32h7b0

    vsfteam/vsf

    Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems

    37 parts341Apache-2.0

Questions

How big is the Addressing manual gnd PCB?

It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Addressing manual gnd use?

37 parts, built around the MC14585BD and MC14069UBD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Addressing manual gnd KiCad files?

From the drtrigon/eagle repository on GitHub, at the commit this page was made from: the board is projects/_export/addressing-manual-gnd/addressing-manual-gnd.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Addressing manual gnd design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).