2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers80 × 140 mm
Esp32
dronelab201/codegeotag on button press
- Size
- 80 × 140 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 50
- Pads
- 79
- Tracks, vias
- 84, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Mar 2026
- Updated
- 19 Mar 2026
Overview
Esp32 is an open-source printed circuit board by dronelab201, from the dronelab201/code repository on GitHub. It is a 2-layer board of 80 × 140 mm with 7 parts on 50 nets, routed with 84 tracks and 6 vias.
Its parts include 4 ICs and 3 connectors. It belongs with the ESP32 boards of this library.
README
README.mdcode
geotag on button press
TODO
- Kicad 9.0.8
- sketch of circuit in pen and paper
- kicad format
- replace ESP32 with Raspberry Pi Pico
- Place PCB Order at Lion Circuites
- PCB Specs
- update code by removing TinyGPS libray with Sparkfun library
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 7SEMI UBLOX ZED F9P | GPS_ZED_F9P:7SEMI_GPS | U2 |
| 1 | BTN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | BTY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | LoRa Module | Lora_Module:Lora Module | U3 |
| 1 | SDCARD mODULE | Library:SDCARD_MODULE | U4 |
| 1 | SWITCH | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ~ | ESP32_Footprints:ESP32_30pin | U1 |
Questions
How big is the Esp32 PCB?
It measures 80 × 140 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32 use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32 KiCad files?
From the dronelab201/code repository on GitHub, at the commit this page was made from: the board is geotag/kicad/esp32/esp32.kicad_pcb and its schematic geotag/kicad/esp32/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask dronelab201 before reusing the design.
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
