2 layers43 × 35 mm
LYFT CTRL
mgkoenig/lyft
LYFT is a sophisticated remote control for your IKEA BEKANT desk.
43 parts88GPL-3.0
4 layers63.2 × 183.1 mm
Neflow
DrNotThatEvil/neflowNot Evils Reflow Oven (neflow
- Size
- 63.2 × 183.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 67
- Pads
- 240
- Tracks, vias
- 384, 31
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Oct 2023
- Updated
- 12 Jul 2026
Overview
Neflow is an open-source printed circuit board by DrNotThatEvil, from the DrNotThatEvil/neflow repository on GitHub. It is a 4-layer board of 63.2 × 183.1 mm with 63 parts on 67 nets, routed with 384 tracks and 31 vias.
It is built around the HLK-PM01, MAX31855KASA+T and IRLML2502, with the BLM18PG471SN1 and 1N4148W among its other parts. Its parts include 11 resistors, 10 capacitors, 7 connectors, 6 transistors and 4 ICs. It belongs with the RP2040 boards of this library.
Main components
5
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
MAX31855KASA+T
SO-8-40℃~+125℃ 14 1500uA 3V~3.6V Built-in temperature sensor SPI Thermocouple-to-Digital Converter SO-8 ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADCs/DACs - Special Purpose
IRLML2502
SOT-23-40℃~+150℃ 1 N-channel 1.25W 20V 4.2A 50mΩ@2.5V 600mV 66pF 740pF 8nC@10V SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
BLM18PG471SN1
06031 1A 200mΩ 470Ω@100MHz ±25% 0603 Ferrite Beads ROHSMurataFerrite Beads
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10K | Resistor_SMD:R_0603_1608Metric | R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111 |
| 8 | 10uF | Resistor_SMD:R_0603_1608Metric | C101, C102, C103, C104, C105, C106, C107, C108 |
| 8 | MountingHole | MountingHole:MountingHole_3mm | H101, H102, H103, H104, H105, H106, H107, H108 |
| 5 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q102, Q103, Q104, Q105, Q106 |
| 4 | BLM18PG471 | Resistor_SMD:R_0603_1608Metric | FB101, FB102, FB103, FB104 |
| 4 | SW_Push | silicone_btn:BUTTON_SILICON | SW101, SW102, SW103, SW104 |
| 3 | 1N4148W | Diode_SMD:D_SOD-123 | D101, D102, D103 |
| 2 | 10nF | Resistor_SMD:R_0603_1608Metric | C109, C110 |
| 2 | MAX31855KASA+T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U103, U104 |
| 1 | 1333870 | Unshareable:1333870 | J101 |
| 1 | FAN0 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J102 |
| 1 | FAN1 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J104 |
| 1 | HLK-PM01 | Converter_ACDC:Converter_ACDC_HiLink_HLK-PMxx | PS101 |
| 1 | LOGO | Branding:PT_BloodLogoSmall | G*** |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U101 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q101 |
| 1 | SSD1306 | SSD1306:128x64OLED | Brd101 |
| 1 | SSR0 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J103 |
| 1 | SSR1 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J105 |
| 1 | Speaker | Library:PassiveBuzzerSMD_JiangsuHuaneng_MLT-5030 | LS101 |
| 1 | TLV803EF29DBZR | Package_TO_SOT_SMD:SOT-23 | U102 |
| 1 | Temp0 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J106 |
| 1 | Temp1 | Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J107 |
| 1 | VSel0 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP101 |
| 1 | VSel1 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP102 |
Questions
How big is the Neflow PCB?
It measures 63.2 × 183.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Neflow use?
63 parts, built around the HLK-PM01, MAX31855KASA+T, IRLML2502 and BLM18PG471SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Neflow KiCad files?
From the DrNotThatEvil/neflow repository on GitHub, at the commit this page was made from: the board is pcb/neflow.kicad_pcb and its schematic pcb/neflow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Neflow design in my own project?
Its repository states no licence, so its author keeps all rights: ask DrNotThatEvil before reusing the design.
Similar boards
- 2 layers176 × 100 mm
SmartDesk v1p0
daverowntree/SmartDesk
I open sourced a design I made a few years back for a non-paying client. Use it as you see fit!
190 parts - 2 layers93 × 61 mm
Zero crossing detector
cs2dsb/zcssr
A PCB and software for a SSR controller that monitors mains AC zero crossings to determine when to turn the SSR on.
98 parts10Apache-2.0 - 2 layers75 × 75 mm
HotPlateController
stasiselectronics/HotPlateController
A simple ESP32 connected controller for a SMD reflow hot plate
47 parts9 - 2 layers99 × 56.3 mm
ReflowOven controller
TilenTinta/ReflowOven_controller
An open source controller for converting kitchen toaster oven to reflow oven
122 parts5MIT - 2 layers101.5 × 54.9 mm
- 4 layers81.9 × 95 mm
- 4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT