/G4_Controller_Board_Wide_Layout.kicad_pcb.jpg?size=s&soon)

G4 Controller Board
Governor G4
- Size
- 67.4 × 80.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 36
- Pads
- 162
- Tracks, vias
- 240, 1
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Jun 2023
- Updated
- 13 Dec 2024
Overview
G4 Controller Board is an open-source printed circuit board by DrGlaucous, from the DrGlaucous/G4 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 67.4 × 80.7 mm with 55 parts on 36 nets, routed with 240 tracks and 1 via.
Its parts include 18 connectors, 11 resistors, 4 switches, 3 diodes and 3 transistors. It belongs with the ESP32 boards of this library.
README
README.md"Governor" G4
This is a repo for a low-cost and feature-rich "flywheel-type" nerf blaster.
Features/Speficications:
- Goal build cost < 150$
- Minimal plastic-anchored screws (almost evertthing is secured with bolts + captive nuts)
- Brushless motor flyhweels
- Solenoid pusher
- LCD display
- Angled talon compatability (straight stick support planned)
- Integrated ammo counter hardware
- Integrated chronograph hardware
- 3-5S Lipo compatable
- 6cm flywheel diameter
- ESP32 controller
- Closed-loop flywheel control (providing fixed RPM and fast spinup times)
- Through-hole electronics and soldering
- Fast decay solenoid driver
Many of these features are implemented in the G4's companion firmware, Detty.
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H1, H1, H1 |
| 3 | 10KR | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R6 |
| 3 | 1N4001 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3 |
| 2 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R7 |
| 2 | 2.4k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | Board Interconnect | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J16 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H1 |
| 1 | 10K Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 10k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 150k Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | 90 Ohm | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | Board Interconnect | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J17 |
| 1 | Board Interconnect | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J18 |
| 1 | Board Interconnect | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Horizontal | J15 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ESC Left | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESC Right | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ESP32-LOLIN32-Lite | Espressif:ESP32-LOLIN32-Lite | U1 |
| 1 | Fire Trigger | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | G*** | kibuzzard-654685F2 | kibuzzard-654685F2 |
| 1 | G*** | kibuzzard-65468392 | kibuzzard-65468392 |
| 1 | G*** | kibuzzard-654685C2 | kibuzzard-654685C2 |
| 1 | G*** | kibuzzard-654684EA | kibuzzard-654684EA |
| 1 | I2C Out | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | IR LED Emitter | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J23 |
| 1 | IR LED Rec. | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J22 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 1 | Magazine Removal Trigger | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Mini360 | My_Library:Mini360 | U2 |
| 1 | Negative BUS | TerminalBlock_RND:TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J25 |
| 1 | Positive BUS | TerminalBlock_RND:TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J24 |
| 1 | Preset A | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW2 |
| 1 | Preset B | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW3 |
| 1 | Preset C | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW4 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | Q2 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | Q3 |
| 1 | Rev Trigger (Optional) | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW7 |
| 1 | Solenoid | TerminalBlock_RND:TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J10 |
| 1 | SolenoidTrig A (Optional) | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | SolenoidTrig B (Optional) | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
More from DrGlaucous/G4
1- 2 layers
/G4_Controller_Board_Wide_Layout.kicad_pcb.jpg?size=s&soon)
Similar boards
- 2 layers229.5 × 95.1 mm

Sweep high
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
55 parts2.1k - 2 layers370 × 11 mm

Daylight Disco XXL
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
55 parts1.1kGPL-3.0 - 2 layers370 × 10 mm

E3NGLEDstick
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
55 parts915 - 2 layers139.3 × 94.8 mm

Flake
lever-tech/flake
An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]
55 parts531CERN-OHL-W-2.0 - 2 layers237.5 × 102.9 mm

Memory
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
55 parts301Unlicense - 2 layers60.6 × 24.1 mm

Blep hackerboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
55 parts253GPL-3.0 - 2 layers100 × 96.5 mm

Keyboard ch552-36-lhs
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware
55 parts236 - 2 layers190.5 × 85.7 mm

Dissatisfaction30
dcpedit/dissatisfaction30
To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).
55 parts147CC-BY-4.0
Questions
How big is the G4 Controller Board PCB?
It measures 67.4 × 80.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the G4 Controller Board use?
55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the G4 Controller Board KiCad files?
From the DrGlaucous/G4 repository on GitHub, at the commit this page was made from: the board is Schematic/G4_Controller_Board/G4_Controller_Board.kicad_pcb and its schematic Schematic/DecayDriver/Re-Sourced/FastDecayDriver/FastDecayDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the G4 Controller Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).