

Morpho64 shield
- Size
- 70 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 91
- Pads
- 237
- Tracks, vias
- 375, 119
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Sep 2026
- Updated
- 22 Oct 2026
Overview
Morpho64 shield is an open-source printed circuit board by drasalmarek, from the drasalmarek/kolejnice_v01 repository on GitHub. It is a 4-layer board of 70 × 55 mm with 62 parts on 91 nets, routed with 375 tracks and 119 vias.
It is built around the ADA4505-1ARJZ-R7, AP63203WU and BAT54S, with the FMMT493TC, FMMT593TC and PRTR5V0U2X among its other parts. Its parts include 21 capacitors, 16 resistors, 6 ICs, 5 connectors and 3 diodes.
Main components
7ADA4505-1ARJZ-R7
SOT-23-5-2.5V~-900mV、900mV~2.5V -40℃~+125℃ 0.006V/us 0.05pA 0.5pA 1 1.8V~5V 100dB 11.5uA 3.8mA 3mV 50kHz 65nV/√Hz@1kHz 95uV/℃ Rail-to-Rail Input, Rail-to-Rail Output Reverse-phase input protection SOT-23-5 Operational Amplifier ROHSAnalog DevicesPrecision Op AmpsAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersBAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky DiodesFMMT493TC
TO-236-3Bipolar (BJT)Diodes IncorporatedFMMT593TC
SOT-23-55℃~+150℃ 1 PNP 100 100V 100nA 1A 200mV 500mW 50MHz 7V PNP SOT-23 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SMBJ24CA
DO-214AA(SMB)ESD And Surge Protection (TVS/ESD)hongjiacheng
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | R | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R9, R10, R11, R12, R13, R14, R16 |
| 12 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C7, C10, C11, C13, C18, C19, C20, C21, C22, C24, C25 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | ADA4505-1ARJZ-R7 | Package_TO_SOT_SMD:SOT-23-5 | U1, U2, U3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C3, C4 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_10x7.7 | C5, C6 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C1, C12 |
| 2 | Conn_Coaxial_Small | Connector_Coaxial:SMA_Amphenol_132289_EdgeMount | J3, J5 |
| 2 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB1, FB1 |
| 2 | OPA596DBVR | Package_TO_SOT_SMD:SOT-23-5 | U5, U6 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 4.7uH | Inductor_SMD:L_7.3x7.3_H4.5 | L1 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | CN10 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J2 |
| 1 | CN7 | Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_Vertical | J1 |
| 1 | DNP | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | FMMT493TC | SamacSys_Parts:SOT95P237X112-3N | Q1 |
| 1 | FMMT593TC | SamacSys_Parts:SOT95P237X112-3N | Q2 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | SMBJ24CA | Diode_SMD:D_SMB | D2 |
| 1 | SW_DIP_x08 | Button_Switch_SMD:SW_DIP_SPSTx08_Slide_Copal_CHS-08A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x03_P3.50mm_Vertical | J4 |
Similar boards
- 2 layers39 × 71 mm

- 4 layers50.8 × 22.9 mm

Bench stim wing
ThatguyCplus/throttleECU
STM32F411CE Throttle ECU — PID position control with AS5048A encoder, H-bridge motor, safety module
114 parts1 - 4 layers102.6 × 107.3 mm

- 4 layers100 × 100 mm

OD PT74
LS120nz/OD-PT74-IC-Tester
Custom Pico-based IC tester to quickly check common 74xx logic chips before using them in retro hardware projects.
86 parts4MIT - 4 layers60 × 60 mm

- 4 layers62 × 107 mm

- 4 layers82 × 55 mm

Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 2 layers102.1 × 82.7 mm

PLC Electiva
JosueHerrera05/Josue_Herrera_Electiva_2026_C2
Repositorio Electíva Diseño Mecatrónico 2026-C2
198 partsMIT
Questions
How big is the Morpho64 shield PCB?
It measures 70 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Morpho64 shield use?
62 parts, built around the ADA4505-1ARJZ-R7, AP63203WU, BAT54S and FMMT493TC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Morpho64 shield KiCad files?
From the drasalmarek/kolejnice_v01 repository on GitHub, at the commit this page was made from: the board is morpho64_shield/morpho64_shield.kicad_pcb and its schematic morpho64_shield/analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Morpho64 shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask drasalmarek before reusing the design.