Skip to the content
2 layersTriacs wemos, the printed circuit board in 3D

Triacs wemos

drancope/wemos-hc
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
17
Pads
35
Tracks, vias
69, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
27 May 2021
Updated
17 Jun 2021

Overview

Triacs wemos is an open-source printed circuit board by drancope, from the drancope/wemos-hc repository on GitHub. It is a 2-layer board with 12 parts on 17 nets, routed with 69 tracks and 0 vias.

It is built around the BT136-600E and MOC3021M. Its parts include 4 resistors, 4 connectors, 2 ICs and 2 transistors.

Main components

2

README

README.md

This is first basic info for a Wemos Home Control project.

The first atempt was built in summer 2020, controls two ceiling lamps, and uses a wemos wired to the main door switches and to a kicad home made PCB with a pair of opto-couplers (moc3121) and triacs (bt136). It's been working for a year with only two reset problemas, before I engage in this description of the project and a propper redesign. Two more wemos are also used to emit wifi orders (post http method). These ones are placed in the bed sides for convenience. The main server creates its own local wifi lan, and mobile phones can get an ip and access the wemos web server, displaying a page where the user can turn on/off the lights. Code is based on ESP8266 examples

Goals:

  • learning and experimenting with mc and electronics -- programming servers, use of wifi libraries -- making PCBs with power devices

  • use of wemos minicontrollers to switch lights at home, -- server to accept mobile orders -- reliable if home router fails -- initially, does not depend on iot standards, but considering learning about that.

  • Expandable -- accepting internet orders --- a second wemos wired to main wemos, to provide connection to local network. --- future use of cloud computing, or aws iot messages.

Parts

12
QtyValueFootprintReferences
4RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R2, R3, R4
2BT136-600Package_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
2MOC3021MPackage_DIP:DIP-6_W7.62mm_LongPadsU1, U2
1Alim-alternTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ2
1Luz 1TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ3
1Luz 2TerminalBlock:TerminalBlock_bornier-2_P5.08mmJ4
1WemosConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ1

Similar boards

  • 2 layers78.7 × 58.4 mmDimmerESP32, the printed circuit board in 3D

    DimmerESP32

    martinhofigueiredo/SE

    Sistemas Embarcados

    12 parts3
  • 2 layers85 × 106.5 mm230V controller, the printed circuit board in 3D

    230V controller

    kkorzen/Mains-Voltage-Device-Controller

    This project was under development during the first semester of Master's Studies at Warsaw University of Technology (Poland) as a final project for Industrial Communication Protocols.

    38 partsMIT
  • 2 layers260 × 140 mmSmartEnergyMag System, the printed circuit board in 3D

    SmartEnergyMag System

    MunyratanakBrorn/Smart-Electrical-Energy-Management-System

    Bachelor of Technology Thesis Project 2024.

    403 parts
  • 2 layers90 × 64.5 mmESLS, the printed circuit board in 3D

    ESLS

    Rajcr2/ESLS

    This was my academic project focused on creating a efficient LED based Street Lighting System which will avoid Power Wastage due to manual mismanagement.

    11 partsMIT
  • 2 layers100 × 100 mmAaram, the printed circuit board in 3D

    Aaram

    xicor22/Aaram

    PCB design for retro fitting old switch boards with new tech to control it remotely.

    77 partsGPL-3.0
  • 2 layers100 × 120.5 mmStopLight4, the printed circuit board in 3D

    StopLight4

    kitspace-test-repos/kicad6-file-collection

    59 partsMIT
  • 2 layers122.6 × 80.6 mmBed smart plug, the printed circuit board in 3D

    Bed smart plug

    mylife-home/mylife-home-devices

    MyLife Home devices

    26 partsGPL-3.0
  • 2 layers41 × 38 mmRS Board, the printed circuit board in 3D

    RS Board

    VGCH/radar_switch

    DIY module for lighting control with radar sensor

    35 parts5

Questions

What parts does the Triacs wemos use?

12 parts, built around the BT136-600E and MOC3021M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Triacs wemos KiCad files?

From the drancope/wemos-hc repository on GitHub, at the commit this page was made from: the board is kicad_files/triacs_wemos.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Triacs wemos design in my own project?

Its repository states no licence, so its author keeps all rights: ask drancope before reusing the design.