
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
Bmp is an open-source printed circuit board by dragonlock2, from the dragonlock2/kicadboards repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 46.5 × 19 mm with 52 parts on 64 nets, routed with 332 tracks and 22 vias.
It is built around the MIC5365-3.3YC5-TR. Its parts include 24 resistors, 12 capacitors, 4 diodes, 4 connectors and 3 ICs. It belongs with the STM32 boards of this library.
An open-source alternative to the PCAN-USB Pro.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 75 | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21, R22, R23, R24 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C7, C8, C9, C10 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R11, R12, R13, R14, R15 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C11, C12 |
| 4 | 150 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5k | Resistor_SMD:R_0603_1608Metric | R1, R10 |
| 2 | MIC5365-3.3YC5 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U1, U3 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 8MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | DFU | Button_Switch_SMD:SW_SPST_CK_KXT3 | SW1 |
| 1 | JTAG | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J7 |
| 1 | PROG_SWD | Connector:Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical | J2 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | UART | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J8 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


Glaubinator/Radio-Telescope-RCA
Radio Telescope System for 1 GHz to 2 GHz Operation

RubenVoell/iceduino
The basic idea behind this project is to create a simple breakout of an ICE40 FPGA with some LEDs and Buttons to interact with the FPGA and enough resources to run a simple softcore, like a small RISC-V core.

kcuzner/usb-led-controller
This is an LED controller for the lights that came with my In-Win A1 Mini-ITX Tower. It came with a simple 12V RGB LED strip, rather than the now-standard WS2812 addressable LED strips that are so common in today's PCs.


aydenschmidtnd/RPNCalcProject
Due to the cost of reverse polish notation (RPN) calculators, I wanted to make the attempt at creating one myself.

glingy/playground
This repository contains the development kit for building code for the Atmel SAM D21 playground board. This board was developed to help members of the Solar Car Club (Prisum) at Iowa State University to learn how to…
It measures 46.5 × 19 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the MIC5365-3.3YC5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dragonlock2/kicadboards repository on GitHub, at the commit this page was made from: the board is projects/bmp/bmp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).