
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
6wire is an open-source printed circuit board by dragonlock2, from the dragonlock2/kicadboards repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 30 × 34 mm with 58 parts on 72 nets, routed with 405 tracks and 81 vias.
It is built around the ATSAMD21G16B-MU, ADS122C04IPW and MAX4238AUT, with the MAX4639EUE and DMP3099L among its other parts. Its parts include 25 capacitors, 15 resistors, 6 ICs, 4 connectors and 2 transistors. It belongs with the SAM D and SAM boards of this library.
An open-source alternative to the PCAN-USB Pro.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0603_1608Metric | C6, C8, C9, C11, C13, C15, C16, C17, C19, C21, C22, C23, C25 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R7, R8, R9, R10 |
| 4 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C7, C10, C12, C14 |
| 3 | 150 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R13, R15 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C18, C20 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 1M | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1, RV2 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C24 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | DMP3099L | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 10M | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | Y1 |
| 1 | 4wire | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J3 |
| 1 | ADS122C04 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3 |
| 1 | ATSAMD21G16B-M | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U2 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | BUT | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | DNP | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | Ferrite | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | LED_ARGB | LED_SMD:LED_Cree-PLCC4_2x2mm_CW | D1 |
| 1 | MAX4238AUT | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | MAX4639EUE | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | MCP6L02x-xMS | Package_SO:MSOP-8_3x3mm_P0.65mm | U4 |
| 1 | SWD/UART | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J4 |
| 1 | USB_B_Micro | extraparts:USB_Micro-B_U254-05 | J1 |
| 1 | guard | Connector_JST:JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J2 |

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere


naturalhazardscience/groundlark
Open source hardware for community-powered citizen science


YJM00/Mixed-Signal-Board-PI-SI-PCB-
즉, 이 프로젝트는 단순 회로 작성이 아니라 System-level Requirement를 기반으로 실제 제작 가능한 형태의 STM32 Mixed-Signal 보드를 설계한 HW 설계 프로젝트입니다.


jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack

shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers

It measures 30 × 34 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the ATSAMD21G16B-MU, ADS122C04IPW, MAX4238AUT and MAX4639EUE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dragonlock2/kicadboards repository on GitHub, at the commit this page was made from: the board is projects/6wire/6wire.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).