2 layers54 × 54 mm
2 layers54 × 54 mm
PCB B
dragondgold/CanSat1Plataforma educativa basada en un satélite CanSat
- Size
- 54 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 96
- Nets
- 55
- Pads
- 308
- Tracks, vias
- 746, 127
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Sep 2018
- Updated
- 1 May 2020
Overview
PCB B is an open-source printed circuit board by dragondgold, from the dragondgold/CanSat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 54 × 54 mm with 96 parts on 55 nets, routed with 746 tracks and 127 vias.
It is built around the BQ27441DRZR-G1A, MIC5353-3.3YMT-TR and SSM3J338R,LF, with the MBRS2040LT3G-JSM among its other parts. Its parts include 27 capacitors, 22 resistors, 12 ICs, 3 transistors and 3 inductors.
Main components
4
BQ27441DRZR-G1A
SON-12-EP(2.5x4)-40℃~+85℃ 1 2.45V~4.5V 4.2V 93uA I2C Lithium Battery Monitoring IC Support Under-voltage lockout SON-12-EP(2.5x4) Battery Management ROHSTexas InstrumentsBattery Management
MIC5353-3.3YMT-TR
TMLF-6(1.6x1.6)-40℃~+125℃@(Tj) 1 160mV@(500mA) 3.3V 30uVrms 500mA 60dB@(1kHz) 6V 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive TMLF-6(1.6x1.6) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SSM3J338R,LF
SOT-23F1 P-Channel 1.4nF 12V 15.9mΩ@4.5V 19.5nC@4.5V 1V 1W 225pF 250pF 6A P-Channel SOT-23F MOSFETs ROHSToshibaMOSFETs
MBRS2040LT3G-JSM
SMBSMB Schottky Diodes ROHSJSMSEMISchottky Diodes
README
README.mdDesarrollo de satélite CanSat para utilizar como plataforma educativa y fomentar el interés en ingenierías
El objetivo principal del proyecto es el de proveer un satélite tipo CanSat completamente funcional y listo para ser utilizado, con una Estación Terrena para la comunicación con el mismo, a modo de plataforma educativa que permite no solo ser utilizada por estudiantes sin modificación alguna, sino que provee la capacidad de ser expandida para agregar o mejorar las funcionalidades básicas dando lugar a los estudiantes a experimentar libremente sobre una plataforma segura.
A su vez, la plataforma sera diseñada siguiendo la normativa impuesta por la European Space Agency (ESA) lo cual dará la posibilidad a futuro de participar de competencias de CanSat.
El proyecto está pensado para que el CanSat pueda alcanzar una altura máxima de 1000 metros aproximadamente y realice un descenso con la ayuda de un paracaídas que limitará su velocidad para evitar la destrucción del mismo al impactar contra el suelo. Durante esta etapa también se realizará la medición de las variables que envía el CanSat a la Estación Terrena para luego ser interpretadas. Esto permite analizar diversos factores respecto a la altura como los niveles de contaminación del aire, la variabilidad de la temperatura y presión atmosférica, la toma de imágenes para su posterior procesamiento, medición de radiación UV, composición gaseosa del aire, etcétera.
Parts
96| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C8, C9, C12, C16, C17, C20, C23, C25, C26 |
| 8 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C7, C11, C13, C15, C21, C22, C24 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C6, C10, C14, C18 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R16, R19, R22 |
| 4 | 51R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R3, R6, R8 |
| 3 | 10k | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R20, R21 |
| 3 | 1k | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R15, R18 |
| 3 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U4, U6, U9 |
| 3 | SSM3J338R,LF | SamacSys_Parts:SSM3J332RLFT | Q1, Q2, Q3 |
| 3 | Spacer | AXTEC:Empty_Footprint | M1, M2, M3 |
| 2 | 4.7uH | AXTEC:SRN3010TA-4R7M | L1, L3 |
| 2 | INA194 | Package_TO_SOT_SMD:SOT-23-5 | U3, U5 |
| 2 | LOGO | AXTEC:Logo_AXTEC | G***, G*** |
| 2 | MCP1642B-50I_MS | SamacSys_Parts:SOP65P490X110-8N | IC1, IC2 |
| 1 | 0.47uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C27 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 1 | 10m | Resistor_SMD:R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R17 |
| 1 | 120m | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 1k8 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14 |
| 1 | 1uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 1 | 200m | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | ADP2108AUJ-3.3 | Package_TO_SOT_SMD:TSOT-23-5 | U2 |
| 1 | BQ21040DBVR | SamacSys_Parts:SOT95P280X145-6N | U10 |
| 1 | BQ27441DRZR-G1A | Package_SON:Texas_S-PDSO-N12 | U8 |
| 1 | Conector_PCB_A-B | AXTEC:Conector_PCB_A-B | J2 |
| 1 | Conector_PCB_B-C | AXTEC:Conector_PCB_B-C_Lado_B | J1 |
| 1 | INA216A4RSWR | Package_DFN_QFN:UQFN-10_1.3x1.8mm_P0.4mm | U7 |
| 1 | MBRS2040LT3G | Diode_SMD:D_SMB | D1 |
| 1 | MH_CanSat | AXTEC:MH_CanSat | MH1 |
| 1 | MIC5353-3.3YMT | Package_DFN_QFN:MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm | U1 |
| 1 | Polyfuse | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | TestPoint_3V3int | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | TestPoint_3v3ext | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | TestPoint_5Vext | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | TestPoint_5Vint | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | TestPoint_BATT | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | TestPoint_CHG | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | TestPoint_GND | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP7 |
| 1 | TestPoint_GPOUT | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | TestPoint_I3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | TestPoint_I5V | TestPoint:TestPoint_Pad_D1.0mm | TP9 |
| 1 | TestPoint_IBATT | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | TestPoint_SCL | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | TestPoint_SDA | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | TestPoint_V3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | TestPoint_V5V | TestPoint:TestPoint_Pad_D1.0mm | TP10 |
| 1 | TestPoint_VBUS | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
The 93 most common of 96 parts.
More from dragondgold/CanSat
5- 2 layers40 × 30 mm
- 2 layers54 × 54 mm
- 2 layers
- 2 layers
Similar boards
- 6 layers122 × 98 mm
- 2 layers
Btctestv0
Starman3787/btc-split-flap
Project to display the value of bitcoin on a split-flap display.
19 parts1MIT - 4 layers38 × 35 mm
D1(Motherboard)
BenjaminJAnderson/CUBE
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and…
51 partsMIT - 4 layers65 × 40.1 mm
Aero Zero
ChladpavPy/Aero-Zero
I started this project, because I wanted to build fully autonomous ai drone. When I looked at the flight controllers available on the market, they were full of hardware that I just do not need or just that I could not…
97 parts - 2 layers22.8 × 16 mm
Onizuka
HarkonenBade/onizuka
Psyduck (used in image on the ESP8266 board, due to the pun on ESP->ESP->Psychic) is Trademark & © of Nintendo 1996-2015
30 partsCC-BY-SA-4.0 - 2 layers20.3 × 69.7 mm
PG attiny404
fabiansteiner/OpenValve
3D-printable pinch valve for irrigation and sensor-driven liquid control.
41 parts276CERN-OHL-S-2.0 - 2 layers67.9 × 131 mm
FW16 EPD
arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16
67 parts44CC-BY-SA-4.0 - 2 layers100 × 100 mm
Questions
How big is the PCB B PCB?
It measures 54 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB B use?
96 parts, built around the BQ27441DRZR-G1A, MIC5353-3.3YMT-TR, SSM3J338R,LF and MBRS2040LT3G-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB B KiCad files?
From the dragondgold/CanSat repository on GitHub, at the commit this page was made from: the board is Hardware/Satelite/PCB_B/PCB_B.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB B design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).