2 layers99.7 × 99.7 mm
Lacerar
valentinbasel/domoticaro_hardware
diseño del PCB de placas basadas en pinguino, para trabajo con domotica en las escuelas
57 partsGPL-3.0
2 layers
PICDUINO
DouglasFelipe97/Picduino-v2.0- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 42
- Nets
- 84
- Pads
- 200
- Tracks, vias
- 373, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 May 2023
- Updated
- 20 Feb 2024
Overview
PICDUINO is an open-source printed circuit board by DouglasFelipe97, from the DouglasFelipe97/Picduino-v2.0 repository on GitHub. It is a 2-layer board with 42 parts on 84 nets, routed with 373 tracks and 7 vias.
It is built around the PIC18F4550-I/PT, L7805 and ULN2003, with the BC337 among its other parts. Its parts include 10 capacitors, 10 connectors, 6 resistors, 5 switches and 4 ICs. It belongs with the PIC boards of this library.
Main components
4
PIC18F4550-I/PT
TQFP-44(10x10)-40℃~+85℃ 10bit 256Byte 2KB 32KB 35 4.2V~5.5V 48MHz 8 Bit Built-in FLASH PIC TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor Arrays
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
Parts
42| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x03_Female | Meus Componentes:borne3v | J1, J8, J9, J10 |
| 4 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2, K3, K4 |
| 3 | 100nF | Meus Componentes:Cap_Disc_100nF | C5, C7, C9 |
| 2 | 100uF | Meus Componentes:Radial_Caneca_D5.0mm_100x16v | C6, C10 |
| 2 | 10R | Meus Componentes:Res_1-2W_TermJust | R5, R6 |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D4 |
| 2 | 220uF | Meus Componentes:Radial_Caneca_D6.3mm_220x16v | C4, C8 |
| 2 | 22pF | Meus Componentes:Cap_Disc_100nF | C1, C2 |
| 2 | 560R | Meus Componentes:Res_1-2W_TermJust | R1, R3 |
| 2 | LED | LED_THT:LED_D5.0mm | D2, D3 |
| 1 | 10K | Meus Componentes:Res_1-2W_TermJust | R2 |
| 1 | 1K | Meus Componentes:Res_1-2W_TermJust | R4 |
| 1 | 330nF | Meus Componentes:Cap_Disc_100nF | C3 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Barrel_Jack_Switch | Meus Componentes:Conn_P4 | J7 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x14_Female | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2 |
| 1 | Conn_01x16_Male | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J6 |
| 1 | Crystal | Crystal:Crystal_HC18-U_Vertical | Y1 |
| 1 | HEF4094BP | Meus Componentes:DIP254P762X420-16 | U4 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | PIC18F4550-IP | Package_DIP:DIP-40_W15.24mm | U2 |
| 1 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | ULN2003 | Package_DIP:DIP-16_W7.62mm | U3 |
Questions
What parts does the PICDUINO use?
42 parts, built around the PIC18F4550-I/PT, L7805, ULN2003 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PICDUINO KiCad files?
From the DouglasFelipe97/Picduino-v2.0 repository on GitHub, at the commit this page was made from: the board is PICDUINO/PICDUINO.kicad_pcb and its schematic PICDUINO/PICDUINO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PICDUINO design in my own project?
Its repository states no licence, so its author keeps all rights: ask DouglasFelipe97 before reusing the design.
Similar boards
- 2 layers71.1 × 95.3 mm
- 2 layers95.5 × 57 mm
Dspic30 simple
Esdras2/dspic30f-devboard-kit
Breadboard-friendly dsPIC30F4011 (DIP-40, all-THT) dev board—KiCad 8 hardware (Rev D) plus XC16 demo firmware, 12 V→5 V regulation, crystal clock & ICSP.
23 partsMIT - 2 layers99.1 × 63.5 mm
- 2 layers70 × 88 mm
- 2 layers100 × 70 mm
- 2 layers126 × 72.5 mm
Projeto I
Carlos9852/Sistemas_Embarcados
Projeto I da disciplina de Sistema Embarcados e Microcontroladores
44 parts - 2 layers110.5 × 80 mm
Digital clock
creyes2001/digital-clock
Bare-metal digital clock firmware for PIC18F4550 with multiplexed 7-segment display, EEPROM time storage, and cooperative scheduler.
40 parts