

Backplane
Retro-Computer Designs (Z80, 65C816, etc)
- Size
- 99.9 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 85
- Pads
- 475
- Tracks, vias
- 1,553, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jan 2017
- Updated
- 23 Jun 2026
Overview
Backplane is an open-source printed circuit board by douggilliland, from the douggilliland/Retro-Computers repository on GitHub. It is a 2-layer board of 99.9 × 99.9 mm with 69 parts on 85 nets, routed with 1,553 tracks and 84 vias.
It is built around the MAX811SEUS-T and 74AC161PC. Its parts include 18 resistors, 15 capacitors, 11 diodes, 4 ICs and 2 connectors. It belongs with the retro computing and games boards of this library.
Main components
2MAX811SEUS-T
SOT-23-4-40℃~+85℃@(TA) 1 1.2V~5.5V 140ms 2.93V Active Low Manual reset input Push-pull Voltage monitor SOT-23-4 Supervisor and Reset ICsonsemiSupervisor And Reset ICs74AC161PC
PDIP-16-40℃~+85℃ 1 167MHz 2V~6V 4 5ns@5V,50pF 74AC Asynchronous Divide-by-2 Reset function、Cascade counter、Synchronous counting Rising Edge Synchronous Up Counter PDIP-16 Counters, Dividers ROHSonsemiCounters, Dividers
README
6502/planck-6502/Hardware/opl2_board/README.mdPlanck 6502 sound card
This is a sound card based on the YM3892 OPL2 sound chip.


This documentation is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | C_Small | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C13, C14, C14 |
| 10 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R14, R15, R17, R18 |
| 6 | Conn_01x40 | Connector_PinSocket_2.54mm:PinSocket_2x25_P2.54mm_Vertical | SLOT0, SLOT1, SLOT2, SLOT3, SLOT4, SLOT5 |
| 6 | DIODE | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7 |
| 5 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R10, R11, R12, R13 |
| 5 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, LED1, LED2, LED3, LED4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R8, R16 |
| 2 | LOGO | logo:logo-big | G***, G*** |
| 2 | MAX811SEUS-T | Package_TO_SOT_SMD:SOT-143 | U2, U3 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | NMI1, RESET1 |
| 1 | 24MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | 74AC161 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | C_Small | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C13 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | PAL24 | Package_DIP:DIP-24_W7.62mm_Socket | U4 |
| 1 | SW_SPST | Button_Switch_THT:SW_E-Switch_EG1271_DPDT | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
The 66 most common of 69 parts.
More from douggilliland/Retro-Computers
12- 2 layers80.8 × 60.1 mm

- 2 layers281 × 108.3 mm

- 2 layers254 × 134.6 mm
.kicad_pcb.jpg?size=s&soon)
FPGA Z80 (no traces)
douggilliland/Retro-Computers
Retro-Computer Designs (Z80, 65C816, etc)
155 parts87 - 2 layers149.9 × 99.9 mm

- 2 layers99.1 × 99.7 mm

- 2 layers80.8 × 60.1 mm

- 2 layers100 × 100 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers

Similar boards
- 2 layers68.6 × 53.3 mm

Gowinduino
SushiBits/Gowinduino
Arduino-compatible evaluation board with Gowin GW1NSR-4C FPGA
86 parts8 - 2 layers35 × 103 mm

- 6 layers160 × 100 mm

- 2 layers233.4 × 280 mm

- 2 layers149.9 × 99.9 mm

Planck-6502
jfoucher/planck-6502
This is a mirror of https://gitlab.com/planck-6502/planck-6502
91 parts2 - 2 layers160 × 100 mm

- 4 layers406.4 × 254 mm

- 2 layers117.3 × 54.5 mm

Questions
How big is the Backplane PCB?
It measures 99.9 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Backplane use?
69 parts, built around the MAX811SEUS-T and 74AC161PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Backplane KiCad files?
From the douggilliland/Retro-Computers repository on GitHub, at the commit this page was made from: the board is 6502/planck-6502/Hardware/backplane/backplane.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask douggilliland before reusing the design.