Skip to the content
2 layers63.5 × 50 mmAR488-esp32-devkitc, the printed circuit board in 3D

AR488-esp32-devkitc

douardda/ESP32-GPIB-pcb9

GitHub mirror of the PCB design for an ESP32/Arduino based GPIB interface

Size
63.5 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
36
Pads
66
Tracks, vias
96, 9
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
12 Mar 2022
Updated
18 Jun 2022

Overview

AR488-esp32-devkitc is an open-source printed circuit board by douardda, from the douardda/ESP32-GPIB-pcb repository on GitHub. It is a 2-layer board of 63.5 × 50 mm with 7 parts on 36 nets, routed with 96 tracks and 9 vias.

It is built around the ESP32-DEVKITC-VE. Its parts include 1 IC and 1 connector. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.

Main components

1

README

README.md

ESP32 based GPIB interface - Kicad design files

This is a simple GPIB interface design using an ESP32 board as main controller. It can (optionally but highly recommanded) use a couple of driver ICs (SN75160 and SN75161/162).

The design consist in 2 boards coupled together: one with the IEEE488 connector and driver ICs, and one with the Arduino or ESP32 board.

Doing so, the common GPIB board can be used with several Arduino/ESP32 boards.

3D view of the common IEEE488 board:

3D view of the interface board for the ESP32-S2-saola:

3D view of the interface board for the Arduini nano:

Interface using a generic ESP32 Devkit-c board:

This design is licensed under the CC-BY-SA 4.0 license.

License: CC BY-SA 4.0

Parts

7
QtyValueFootprintReferences
1Conn_02x12_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_VerticalJ2
1ESP32-DevKitCesp32:ESP32-DevKitCU2

The 2 most common of 7 parts.

More from douardda/ESP32-GPIB-pcb

3
  • 2 layers63.5 × 55.6 mmAR488-common, the printed circuit board in 3D

    AR488-common

    douardda/ESP32-GPIB-pcb

    GitHub mirror of the PCB design for an ESP32/Arduino based GPIB interface

    11 parts9
  • 2 layers63.5 × 50 mmAR488-arduino nano, the printed circuit board in 3D

    AR488-arduino nano

    douardda/ESP32-GPIB-pcb

    GitHub mirror of the PCB design for an ESP32/Arduino based GPIB interface

    7 parts9
  • 2 layers63.5 × 50 mmAR488-esp32-saola, the printed circuit board in 3D

    AR488-esp32-saola

    douardda/ESP32-GPIB-pcb

    GitHub mirror of the PCB design for an ESP32/Arduino based GPIB interface

    7 parts9

Similar boards

  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers115 × 75 mmSpinCoater, the printed circuit board in 3D

    SpinCoater

    RParkerE/OpenSilicon

    OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

    11 parts55GPL-3.0
  • 2 layers127.3 × 54.1 mmESP32 SolarBox, the printed circuit board in 3D

    ESP32 SolarBox

    cole8888/SRNE-Solar-Charge-Controller-Monitor

    Read data from SRNE solar charge controllers.

    34 parts42
  • 2 layers62.2 × 57.1 mmWs2mqtt, the printed circuit board in 3D

    Ws2mqtt

    Tho85/ws2mqtt

    Connect WiSafe2 devices to Home Assistant

    8 parts28BSD-3-Clause
  • 2 layers99.9 × 99.9 mmSplit flap, the printed circuit board in 3D

    Split flap

    tinkermax/split-flap

    DIY mechanical spli-flap display

    28 parts13CC-BY-4.0
  • 2 layersJF ECU32, the printed circuit board in 3D

    JF ECU32

    JoachimF/JF-ECU32

    RC Jet Engine ECU

    27 parts12GPL-3.0
  • 2 layers72.5 × 84.8 mmDevboard, the printed circuit board in 3D

    Devboard

    ste2425/PSP-Bluetooth-AVConnector

    An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

    13 parts12
  • 2 layers100 × 88.9 mmGen2, the printed circuit board in 3D

    Gen2

    Alignof/Juggernaut

    疑似時限爆弾解除競技

    41 parts10MIT

Questions

How big is the AR488-esp32-devkitc PCB?

It measures 63.5 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AR488-esp32-devkitc use?

7 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AR488-esp32-devkitc KiCad files?

From the douardda/ESP32-GPIB-pcb repository on GitHub, at the commit this page was made from: the board is AR488-esp32-devkitc/AR488-esp32-devkitc.kicad_pcb and its schematic AR488-esp32-devkitc/AR488-esp32-devkitc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AR488-esp32-devkitc design in my own project?

Its repository states no licence, so its author keeps all rights: ask douardda before reusing the design.