
Rf sig gen
joshajohnson/rf-sig-gen
MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor

PDM microphone breakout board
Sound lens is an open-source printed circuit board by dotcypress, from the dotcypress/sound-lens repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 41.5 × 42.8 mm with 33 parts on 20 nets, routed with 357 tracks and 32 vias.
It is built around the STP08CP05M and MP34DT06J. Its parts include 12 capacitors, 8 diodes, 1 resistor, 1 IC and 1 connector. It belongs with the audio and music boards of this library.
PDM microphones breakout board.
Licensed under either of
at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 100n | Resistor_SMD:R_0603_1608Metric | C2, C4, C6, C8, C10, C12 |
| 6 | 1u | Resistor_SMD:R_0603_1608Metric | C1, C3, C5, C7, C9, C11 |
| 6 | MP34DT06 | ProjectLibrary:MP34DT06J | MIC1, MIC2, MIC3, MIC4, MIC5, MIC6 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 3K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | Conn_02x06_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | STP08CP05 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1 |
The 31 most common of 33 parts.

joshajohnson/rf-sig-gen
MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor

lens42/D-Lev-All-in-One-PCB
This integrates the excellent D-Lev digital theremin design at D-Lev.com into a single surface mount PCB




hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
It measures 41.5 × 42.8 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the STP08CP05M and MP34DT06J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the dotcypress/sound-lens repository on GitHub, at the commit this page was made from: the board is pcb/SoundLens.kicad_pcb and its schematic pcb/SoundLens.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).