6 layers91 × 71 mm
2 layers11 × 22.1 mm
Ir smart led controller
dotcypress/ir-smart-led-controller10IR Remote Controller for WS2812(or analog) LED Strip
- Size
- 11 × 22.1 mm
- Copper layers
- 2
- Thickness
- 0.33 mm
- Parts
- 7
- Nets
- 10
- Pads
- 25
- Tracks, vias
- 38, 6
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220914)
- Created
- 19 May 2021
- Updated
- 28 Nov 2022
Overview
Ir smart led controller is an open-source printed circuit board by dotcypress, from the dotcypress/ir-smart-led-controller repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 11 × 22.1 mm with 7 parts on 10 nets, routed with 38 tracks and 6 vias.
It is built around the LDK220C-R and TSSP58038. Its parts include 3 capacitors, 3 ICs and 1 connector. It belongs with the lEDs and displays boards and the STM32 boards of this library.
Main components
2
LDK220C-R
SOT-323-5L-40℃~+125℃@(Tj) 1 1.2V~12V 100uVrms 13.2V 200mA 60dB@(1kHz) 60uA Adjustable Over Current Protection、Over Temperature Protection、Enable Positive SOT-323-5L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TSSP58038
SIP-3-2.54mm-25℃~+85℃ 10mW 2.5V~5.5V 25m 38kHz 700uA ±45° SIP-3-2.54mm Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)
README
readme.mdir-smart-led-controller
IR Remote Controller for WS2812(or analog) LED Strip.
Resources
License
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Parts
7Questions
How big is the Ir smart led controller PCB?
It measures 11 × 22.1 mm and has 2 copper layers, 0.33 mm thick.
What parts does the Ir smart led controller use?
7 parts, built around the LDK220C-R and TSSP58038. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ir smart led controller KiCad files?
From the dotcypress/ir-smart-led-controller repository on GitHub, at the commit this page was made from: the board is pcb/ir-smart-led-controller.kicad_pcb and its schematic pcb/ir-smart-led-controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ir smart led controller design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers57.7 × 50 mm
KiCAD Board
XasWorks/dragon-home
A rework of our old SmartHome project, this time done cleanly and neatly~
47 parts8GPL-3.0 - 2 layers57.8 × 34 mm
DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5 - 2 layers188.9 × 115 mm
- 2 layers95 × 90.5 mm
- 2 layers50 × 58 mm
- 4 layers76.2 × 25.4 mm
- 2 layers84.9 × 59.5 mm
IR PCB
Kushal-Sachdeva78/VVS-Ballers-RoboCup
Autonomous RoboCupJunior Soccer (IR League) robots by Team VVS Ballers: 9th place at RoboCup 2026 in Incheon. Teensy 4.1 multi-board electronics, IR/line/ultrasonic sensing, OpenMV vision, 48 V solenoid kicker.
54 parts1MIT