4 layers148.9 × 56 mm
4 layers76.2 × 25.4 mm
Curio
dotcypress/curio1Glorified Infrared Remote Control.
- Size
- 76.2 × 25.4 mm
- Copper layers
- 4
- Thickness
- 1.71 mm
- Parts
- 31
- Nets
- 33
- Pads
- 107
- Tracks, vias
- 256, 40
- Pours
- 149
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Oct 2022
- Updated
- 31 Jan 2023
Overview
Curio is an open-source printed circuit board by dotcypress, from the dotcypress/curio repository on GitHub. It is a 4-layer board of 76.2 × 25.4 mm with 31 parts on 33 nets, routed with 256 tracks and 40 vias.
It is built around the TSSP58038, CR20300J and IRL 81A. Its parts include 10 resistors, 6 capacitors, 3 ICs, 3 switches and 2 connectors. It belongs with the STM32 boards of this library.
Main components
3
TSSP58038
SIP-3-2.54mm-25℃~+85℃ 10mW 2.5V~5.5V 25m 38kHz 700uA ±45° SIP-3-2.54mm Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)
CR20300J
0402-55℃~+155℃ 30Ω 62.5mW Thick Film Resistor ±100ppm/℃ ±5% 0402 Chip Resistor - Surface Mount ROHSMeritekChip Resistor - Surface MountIRL 81A
插件-40℃~+100℃ 1.3V 180mW 25mW/sr@IF=20mA 5V 860nm Plugin Infrared LED Emitters ROHSOSRAM Opto SemiconInfrared LED Emitters
README
readme.mdCurio
Glorified Infrared Remote Control.
Resources
Credits
1-Bit Iconsby VectorPixelStarEdition 12font by Designer's HighBM Armyfont by BitmapManiaNokia Cellphone FCfont by Zeh Fernando
License
Licensed under either of
- Apache License, Version 2.0 (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
Contribution
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5 |
| 4 | 190R | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R8 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R9, R10 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C6 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | FerriteBead | Resistor_SMD:R_0603_1608Metric | FB1, FB2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | BTN_A | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW2 |
| 1 | BTN_B | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW3 |
| 1 | CR2030 | curio:BatteryHolder-Lynx-BAT-HLD-001 | BT1 |
| 1 | G*** | kibuzzard-633E88FC | kibuzzard-633E88FC |
| 1 | G*** | kibuzzard-633E88B5 | kibuzzard-633E88B5 |
| 1 | IRL81A | LED_THT:LED_SideEmitter_Rectangular_W4.5mm_H1.6mm | D1 |
| 1 | LCD12864 | curio:LCD_FPC_1x14_P0.80mm | U3 |
| 1 | Qwiic | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J2 |
| 1 | Reset | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | SW1 |
| 1 | STM32G0xxFx | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | TSSP58038 | OptoDevice:Vishay_MINICAST-3Pin | U2 |
| 1 | TagConnect | lib:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | Thumbstick | curio:Thumbstick | RV1 |
Questions
How big is the Curio PCB?
It measures 76.2 × 25.4 mm and has 4 copper layers, 1.71 mm thick.
What parts does the Curio use?
31 parts, built around the TSSP58038, CR20300J and IRL 81A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Curio KiCad files?
From the dotcypress/curio repository on GitHub, at the commit this page was made from: the board is pcb/curio.kicad_pcb and its schematic pcb/curio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Curio design in my own project?
Its repository states no licence, so its author keeps all rights: ask dotcypress before reusing the design.
Similar boards
- 2 layers94.8 × 47.8 mm
- 2 layers176.4 × 21.4 mm
- 2 layers54 × 55 mm
Ha plattform
alexmohr/home_automation_plattform
PCB and schematic for my personal home automation plattform
15 parts1 - 2 layers78.8 × 63 mm
Lynx-30-Camera Trap
Engr-umer-mohammed/Lynx-30-Camera-Trap
Low-power long-range wireless camera trap designed using KiCad and Simulink.
37 parts1MIT - 4 layers76.3 × 99.3 mm
- 2 layers229.9 × 125.7 mm
Panelized
icicl/led-scoreboard-pcb
A custom modular LED scoreboard featuring snap-apart PCB architecture, hot-swappable 7-segment/bar-graph display faces, and multiplexed hardware logic powered by a Raspberry Pi Pico W.
81 parts - 2 layers110 × 171 mm
