
BenchyMotherBoard PCB
Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!

MegaWiFi Cartridge
Mega wifi is an open-source printed circuit board by doragasu, from the doragasu/mw-cart repository on GitHub. It is a 2-layer board of 83.8 × 51 mm with 51 parts on 113 nets, routed with 1,658 tracks and 242 vias.
It is built around the 74LVC162245ADL, 74LVC245AD and ESP-12E, with the 74LVC1G08GW and SC16C550BIB48 among its other parts. Its parts include 18 resistors, 15 capacitors, 8 ICs, 2 connectors and 1 diode. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
You can find the most recent version at the mw-cart GitLab project page. This repository will be kept as is, and will not be updated anymore.
MegaWiFi Cartridge

This cartridge is for the MegaWiFi project. It consists of a cartridge for the SEGA Genesis/Megadrive console, along with a WiFi interface, allowing brave programmers to implement games with online gaming, leaderboards, evil DLCs, etc.
This project was initially created for 1985alternativo, but to this day, no brave soul has dared to make an online game using this cart. Will you give it a try?
Have a look to the github project page for more information.
mw-cart is licensed under the CERN OHL 1.2 license. You are free to study, distribute and make modifications to the Documentation, under the aforementioned license terms. You are also free to make cartridges derived from the Documentation for non-commercial purposes. If you want to make a commercial Product using this Documentation, please contact me to obtain a licence.
Electronic CAD design files are for KiCAD Open Source electronics design suite. Please install latest version along with KiCAD libraries to open the project. When opening schematic, KiCAD will most likely complain about missing library "doragasu". Despite this warning, the schematic should load nicely (using the cached libraries). To avoid this message, install the missing library and make sure to configure it in the schematic editor.
The files under gerber directory are for PCB fabrication. Send them to your favorite PCB fab house.
Enjoy!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitors_SMD:C_0805 | C1, C2, C6, C8, C9, C10, C11, C12, C13, C15 |
| 7 | NP | Resistors_SMD:R_0805 | R2, R4, R8, R9, R10, R12, R13 |
| 4 | 10k | Resistors_SMD:R_0805 | R3, R5, R6, R7 |
| 4 | NP | doragasu:JUMPER_0805 | R14, R16, R17, R18 |
| 2 | 22p | Capacitors_SMD:C_0805 | C3, C4 |
| 2 | 22u_6.3V | Capacitors_SMD:c_elec_4x4.5 | C7, C14 |
| 2 | 74LVC162245 | Housings_SSOP:TSSOP-48_6.1x12.5mm_Pitch0.5mm | U6, U8 |
| 1 | 0 | doragasu:JUMPER_0805 | R1 |
| 1 | 100k | Resistors_SMD:R_0805 | R11 |
| 1 | 24 MHz | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | 2N7002 | Transistors_SMD:sot23 | Q1 |
| 1 | 47k | Resistors_SMD:R_0805 | R15 |
| 1 | 74LVC1G08GW | Housings_SOT-23_SOT-143_TSOT-6:SOT23-5 | U5 |
| 1 | 74LVC245 | Housings_SSOP:SSOP-20_4.4x6.5mm_Pitch0.65mm | U7 |
| 1 | AZ1117CH-3.3 | SMD_Packages:SOT-223 | U4 |
| 1 | ESP-12E | ESP8266:ESP-12E | U3 |
| 1 | MD-CART-FINGERS | doragasu:MD-CART-FINGERS | P2 |
| 1 | NP | LEDs:LED-0603 | D1 |
| 1 | NP | Capacitors_SMD:C_0805 | C5 |
| 1 | NP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | P1 |
| 1 | S29GL032N | doragasu:TSOP48SP | U2 |
| 1 | SC16C550BIB48 | Housings_QFP:TQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | VAL** | Symbols:Symbol_OSHW-Logo_CopperTop_Negative | Symbol_OSHW-Logo_CopperTop_Negative |
The 47 most common of 51 parts.

Daxxn/BenchyReloaded
New and improved Benchy, now with more doodads!



tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O


rallepalaveev/A2DVI
This is based on Clintech Pico Board (CPB) with 48 GPIOs, most 5V tolerant.

robfinch/Cores
Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

It measures 83.8 × 51 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the 74LVC162245ADL, 74LVC245AD, ESP-12E and 74LVC1G08GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the doragasu/mw-cart repository on GitHub, at the commit this page was made from: the board is mega-wifi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask doragasu before reusing the design.