Skip to the content
2 layers89.5 × 63.5 mmMega prog, the printed circuit board in 3D

MegaWiFi Programmer

Size
89.5 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
76
Pads
200
Tracks, vias
672, 158
Pours
9
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
24 Mar 2017
Updated
8 Jan 2022

Overview

Mega prog is an open-source printed circuit board by doragasu, from the doragasu/mw-prog repository on GitHub. It is a 2-layer board of 89.5 × 63.5 mm with 35 parts on 76 nets, routed with 672 tracks and 158 vias.

It is built around the AT90USB646-MU and 74LVC2G14GW. Its parts include 13 capacitors, 6 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

WARNING: THIS PROJECT HAS MOVED

You can find the most recent version at the mw-prog GitLab project page. This repository will be kept as is, and will not be updated anymore.

mw-prog

MegaWiFi Programmer

mw-prog

This programmer is for the MegaWiFi project. It can write SEGA Genesis/Megadrive ROM files to MegaWiFi cartridges (up to 32 Mbit). It can also upload firmware blobs to the WiFi module inside MegaWiFi cartridges. To do so, you will need:

And of course a both a MegaWiFi programmer and the target MegaWiFi cartridge.

This project was initially created for 1985alternativo, but to this day, no brave soul has dared to make an online game using this cart. Are you brave enough to try?

License

mw-prog is licensed under the CERN OHL 1.2 license. You are free to study, distribute and make modifications to the Documentation, under the aforementioned license terms. You are also free to make cartridges derived from the Documentation for non-commercial purposes. If you want to make a commercial Product using this Documentation, please contact me to obtain a licence.

About CAD files

Electronic CAD design files are for KiCAD Open Source electronics design suite. Please install latest version along with KiCAD libraries to open the project. When opening schematic, KiCAD will most likely complain about missing library "doragasu". Despite this warning, the schematic should load nicely (using the cached libraries). To avoid this message, install the missing library and make sure to configure it in the schematic editor.

The files under gerber directory are for PCB fabrication. Send them to your favorite PCB fab house.

Files under enclosure directory are for the design and fabrication of the PCB enclosure. You can 3D-print the OBJ files to have a not specially pretty but functional enclosure for the programmer. If you want to edit the design files, you will need FreeCAD.

Enjoy!

Parts

35
QtyValueFootprintReferences
4100nCapacitors_SMD:C_0805C6, C7, C8, C11
422pCapacitors_SMD:C_0805C3, C4, C12, C13
4VAL**Mounting_Holes:MountingHole_3-5mmMountingHole_3-5mm, MountingHole_3-5mm, MountingHole_3-5mm, MountingHole_3-5mm
3NPCapacitors_SMD:C_0805C5, C9, C10
222Resistors_SMD:R_0805R1, R2
2220Resistors_SMD:R_0805R4, R5
2LEDLEDs:LED-5MMD1, D2
114.74MHzCrystals:Crystal_HC49-U_VerticalY2
11megResistors_SMD:R_0805R6
11uCapacitors_SMD:C_0805C2
147kResistors_SMD:R_0805R3
16.8uCapacitors_ThroughHole:Capacitor5x11RM2.5C1
174LVC2G14Housings_SOT-23_SOT-143_TSOT-6:SOT23-6U2
18MHzCrystals:Crystal_HC49-U_VerticalY1
1AT90USB646Housings_QFP:LQFP-64_14x14mm_Pitch0.8mmU1
1CONN_02X03Pin_Headers:Pin_Header_Straight_2x03P3
1MD-CART-PORTdoragasu:GEN_CART_PORTP2
1SW_PUSHDiscret:SW_PUSH_SMALLSW1
1USB_BConnect:USB_BP1
1VAL**Symbols:Symbol_OSHW-Logo_SilkScreenSymbol_OSHW-Logo_SilkScreen

The 34 most common of 35 parts.

Similar boards

  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66
  • 2 layers75 × 82 mmEsp8266-midi, the printed circuit board in 3D

    Esp8266-midi

    tadas-s/OSC2Midi

    ESP8266 based OSC <-> MIDI WiFi bridge

    33 parts34MIT
  • 4 layers210.8 × 74.9 mmBkm-10rlternative, the printed circuit board in 3D

    Bkm-10rlternative

    skumlos/bkm-10rlternative

    Project aiming to replicate the BKM-10R/11R remote for Sony professional CRT monitors.

    257 parts17
  • 4 layers47 × 27 mmSD Swap, the printed circuit board in 3D

    SD Swap

    Mr-Bossman/SD_Swap

    A development tool which swaps an sdcard between a usb3 card reader or a SBC.

    44 parts14
  • 2 layers66 × 51.5 mmWiFi Gate Controller, the printed circuit board in 3D

    WiFi Gate Controller

    mikelawrence/WiFi-Gate-Controller

    WiFi enabled Gate Controller Addon to US Automatic Gate Opener

    91 parts8MIT
  • 2 layers80 × 90 mmWiFi Septic Controller, the printed circuit board in 3D

    WiFi Septic Controller

    mikelawrence/WiFi-Septic-Controller

    WiFi enabled Septic Controller

    104 parts8MIT
  • 6 layers83.5 × 99.4 mmTAPRx888, the printed circuit board in 3D

    TAPRx888

    TAPR/TAPRx888

    The TAPR rx888 replacement board project

    225 parts6MIT
  • 2 layers39 × 66.5 mmBC250-Power, the printed circuit board in 3D

    BC250-Power

    Needleroozer/bc250-power-board

    Power Distribution PCBs for the BC-250 cards

    39 parts5

Questions

How big is the Mega prog PCB?

It measures 89.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mega prog use?

35 parts, built around the AT90USB646-MU and 74LVC2G14GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mega prog KiCad files?

From the doragasu/mw-prog repository on GitHub, at the commit this page was made from: the board is mega-prog.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mega prog design in my own project?

Its repository states no licence, so its author keeps all rights: ask doragasu before reusing the design.