
Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

AGC Disabler is an open-source printed circuit board by donpivo, from the donpivo/AGC_Disabler repository on GitHub. It is a 2-layer board of 46 × 22.5 mm with 17 parts on 17 nets, routed with 108 tracks and 10 vias.
It is built around the PMEG6020ER. Its parts include 4 connectors, 2 capacitors, 2 resistors, 2 ICs and 2 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1µF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | SW_DPDT_x2 | Retronics_Switches:CUS22TB | SW1, SW2 |
| 1 | 100kΩ | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | 12kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 8.2kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | Batt+ | TestPoint:TestPoint_Pad_D2.5mm | J1 |
| 1 | Batt- | TestPoint:TestPoint_Pad_D2.5mm | J3 |
| 1 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | LED_Voltmeter_0.28 | Retronics_Instruments:LED_Voltmeter_0.28 | U2 |
| 1 | LOGO | Icons_Graphics:retronics_logo_14mm | G*** |
| 1 | Out+ | TestPoint:TestPoint_Pad_D2.5mm | J2 |
| 1 | Out- | TestPoint:TestPoint_Pad_D2.5mm | J4 |
| 1 | PMEG6020 | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | T1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | TLV76601 | Retronics_IC_Power:TLV76601QWDRBRQ1 | U1 |

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG



yuanyong2024/IoT-feather
a IoT evb board that based on Quectel BG95 modem and in adafruit feather form factor


Aces-Electronics/ae-landy-heater-controller
Ace's Electronics Pty Ltd 12V heater controller for mirrors and windscreens

holoindustry/AxxSolder_modded
Interested in purchasing an AxxSolder 3.2? On my website 5Dimensions you can purchase assembled and tested AxxSolder 3.2 boards with connectors and hardware.
It measures 46 × 22.5 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the PMEG6020ER. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the donpivo/AGC_Disabler repository on GitHub, at the commit this page was made from: the board is Schematic/AGC_Disabler/AGC_Disabler.kicad_pcb and its schematic Schematic/AGC_Disabler/AGC_Disabler.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask donpivo before reusing the design.