Skip to the content
2 layers160 × 40 mmShooting star, the printed circuit board in 3D
Size
160 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
25
Pads
80
Tracks, vias
165, 0
Routed
Yes
KiCad
KiCad 4
Created
8 Dec 2016
Updated
11 Aug 2023

Overview

Shooting star is an open-source printed circuit board by domenipavec, from the domenipavec/nightsky repository on GitHub, published under the MIT licence. It is a 2-layer board of 160 × 40 mm with 39 parts on 25 nets, routed with 165 tracks and 0 vias.

It is built around the TLC5925IDW. Its parts include 16 diodes, 15 connectors, 1 capacitor and 1 resistor.

Main components

1

README

README.md

nightsky

Parts

39
QtyValueFootprintReferences
16LEDled5mm:LED_D5.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16
14Conn_01x01wirepad:Wire_pad_2.5mm_1.25mmJ1, J2, J3, J4, J5, J6, J7, J9, J10, J11, J12, J13, J14, J15
1100nCapacitors_SMD:C_0603_HandSolderingC1
11k2Resistors_SMD:R_0805_HandSolderingR1
1TLC5925Housings_SOIC:SOIC-24W_7.5x15.4mm_Pitch1.27mmJ8

The 33 most common of 39 parts.

More from domenipavec/nightsky

5

Similar boards

  • 2 layers240 × 200 mmLed matrix, the printed circuit board in 3D

    Led matrix

    domenipavec/avr-snow

    141 partsMIT
  • 2 layers160 × 99.7 mmLed cube-4x4, the printed circuit board in 3D

    Led cube-4x4

    domenipavec/hardware

    40 parts
  • 2 layers24.4 × 24.4 mmOSO SWAT B1, the printed circuit board in 3D

    OSO SWAT B1

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    39 parts2.1k
  • 2 layers33 × 26 mmVL53L1x pwm, the printed circuit board in 3D

    VL53L1x pwm

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    39 parts915
  • 2 layers43.4 × 18.8 mmUsb sniffer lite, the printed circuit board in 3D

    Usb sniffer lite

    ataradov/usb-sniffer-lite

    A simple USB sniffer based on Raspberry Pi RP2040

    39 parts706BSD-3-Clause
  • 2 layers40 × 20 mmESP8266, the printed circuit board in 3D

    ESP8266

    windowsair/wireless-esp8266-dap

    CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器

    39 parts690MIT
  • 2 layers100 × 70.3 mmModulAdapterMagnet, the printed circuit board in 3D

    ModulAdapterMagnet

    GaudiLabs/OpenDrop

    Open Source Digital Microfluidics Bio Lab

    39 parts492GPL-3.0

Questions

How big is the Shooting star PCB?

It measures 160 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Shooting star use?

39 parts, built around the TLC5925IDW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shooting star KiCad files?

From the domenipavec/nightsky repository on GitHub, at the commit this page was made from: the board is pcb/shooting-star/shooting-star.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shooting star design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).