

Zzjlc template
- Size
- 237.7 × 127.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 61
- Pads
- 321
- Tracks, vias
- 372, 34
- Pours
- 209
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Apr 2024
- Updated
- 29 Sep 2024
Overview
Zzjlc template is an open-source printed circuit board by dohn-joh, from the dohn-joh/alias repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 237.7 × 127.9 mm with 88 parts on 61 nets, routed with 372 tracks and 34 vias.
Its parts include 38 diodes and 38 switches.
README
README.mdAlias

Features
- Custom 3D printed keycaps
- Choc v1 and v2 compatible hotswap
- Wireless dongle
- PCB generated in ergogen
Compatibility/Disclaimer
Everything in this repo has been tested. Even so, use these files at your own risk. If you decide to have the pcb fabbed, 1.2mm pcb thickness is recommended. Higher thicknesses are still compatible but add height to the case.
- Status of keycap compatibility: only keycaps that are <=17.85mm wide and <=18mm deep are supported
- Status of bottom case:
cutouts are currently only compatible with choc v2 with the exception of the lever keys, which have cutouts that support both choc v1 and v2fully compatible with both choc v1 and v2
Parts
| Part: Model# | Link |
|---|---|
| Microcontroller: Supermini NRF52840 (or nice!nano) | |
| Battery: 301230 with molex pico ezmate connector | |
| Battery connector: molex pico ezmate 1x02 | |
| Power button: PCM12SMTR | |
| Reset button: SKHLLCA010 | |
| Choc v1 or v2 switches x 36 | |
| Kailh Choc PG1350 Hot Swap Sockets x 36 | |
| Keycaps | |
| Magnetic USB connector (optional): Netdot Gen10 |
Thanks
These people and many more helped make this keyboard possible. Yall are legends.
MrZealot
Pseudoku
petejohanson
caksoylar(bravekarma)
jcmkk3
ceoloide
infused-kim
Flatfootfox
sadekbaroudi
zzeneg
joelspadin
wolfwood
claussen
Geist
rmwphd(atinyzubat)
fish
Araxia
honorless
elkepeninParts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +22 | |
| 36 | MX | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20 | |
| 6 | mounting_hole | H1, H2, H3, H4, H5, H6 | |
| 2 | PEC12R-4xxxF-Sxxxx | ROT1, ROT2 | |
| 1 | ProMicro | MCU1 | |
| 1 | conn_molex_pico_ezmate_1x02 | CONN1 | |
| 1 | icon_bat | ICON1 | |
| 1 | pads | PAD1 | |
| 1 | power_switch | SW1 | |
| 1 | reset_button | sw_reset_side | SW2 |
More from dohn-joh/alias
3- 2 layers252.6 × 123.5 mm

- 2 layers252.6 × 123.5 mm

- 2 layers254 × 125.2 mm

Similar boards
- 2 layers142.5 × 106.3 mm

- 2 layers43.8 × 60.3 mm

Smallreplacement
c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer
88 parts286MIT - 2 layers95.3 × 95.3 mm

- 2 layers69.9 × 108 mm

- 2 layers127 × 36.2 mm

- 2 layers44.6 × 53.7 mm

- 2 layers43 × 43 mm

TurboCAN
henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.
88 parts82 - 2 layers251.3 × 103.7 mm

Questions
How big is the Zzjlc template PCB?
It measures 237.7 × 127.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zzjlc template use?
88 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zzjlc template KiCad files?
From the dohn-joh/alias repository on GitHub, at the commit this page was made from: the board is ergogen/output/pcbs/zzjlc_template.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zzjlc template design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).