
RC Receiver PCB ESP32-WROOM
failsmakes/RC_Receiver_PCB_ESP32-WROOM
Bu proje, RC-Receiver-ESP yazılımı için tasarlanmış ESP32-WROOM tabanlı RC alıcı devresinin PCB çizimini içerir. Tasarım KiCad 10.0.1 ile hazırlanmıştır.

NitHub Driver for Robotic Vehicles PCB Design
Nit rover is an open-source printed circuit board by doabayomi, from the doabayomi/ndrive-board repository on GitHub. It is a 2-layer board of 110.5 × 102.9 mm with 75 parts on 82 nets, routed with 633 tracks and 98 vias.
It is built around the ESP32-S3-WROOM-1-N8, RZ7886 and 1.5KE6.8A, with the BC517 among its other parts. Its parts include 19 capacitors, 17 connectors, 11 resistors, 11 ICs and 4 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
The first prototype board using modules to acheive;

| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3, C4, C6, C7, C8, C9, C10, C11, C14, C15, C19, C20 |
| 4 | 10k | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R1, R3, R6, R7 |
| 4 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP3, JP6, JP7, JP8 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C13, C23 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C12, C16 |
| 2 | INA219AxDCN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3 |
| 2 | RZ7886 | Package_DIP:DIP-8_W7.62mm_LongPads | U6, U7 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2 |
| 1 | 1.5KE6.8A | Diode_THT:D_DO-201AD_P15.24mm_Horizontal | D2 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 10A Slow Blow | Fuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | 10m | Resistor_SMD:R_2512_6332Metric | R4 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C5 |
| 1 | 12V_OUT | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J16 |
| 1 | 150 | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R13 |
| 1 | 1k | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R11 |
| 1 | 1uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1 |
| 1 | 330 | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R12 |
| 1 | 4_Channel_Logic_Level_Shifter | Ext_Modules:4 Channel Logic Level Shifter | U5 |
| 1 | 5.7k | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R5 |
| 1 | 5m | Resistor_SMD:R_2512_6332Metric | R2 |
| 1 | 68 | Resistor_SMD:R_2010_5025Metric_Pad1.40x2.65mm_HandSolder | R14 |
| 1 | BC517 | Package_TO_SOT_THT:TO-92L_Wide | Q1 |
| 1 | Battery | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J2 |
| 1 | Bump Switch | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J7 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | ESP32-S3-WROOM-1 | Espressif:ESP32-S3-WROOM-1U | U2 |
| 1 | Emergency_Stop | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J11 |
| 1 | HX711_Module | Ext_Modules:HX711 Mini Module | U13 |
| 1 | JP1 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | JP2 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J12 |
| 1 | JP4 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J17 |
| 1 | JP5 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J13 |
| 1 | LED_3V3 | LED_THT:LED_D3.0mm | D4 |
| 1 | LED_5V | LED_THT:LED_D3.0mm | D1 |
| 1 | LED_BATT | LED_THT:LED_D3.0mm | D3 |
| 1 | LOGO | LOGO | |
| 1 | Load Cell | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J10 |
| 1 | Load Cell Ext | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J9 |
| 1 | M1 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J14 |
| 1 | M1_ENC | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | M2 | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J15 |
| 1 | M2_ENC | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | MP1584EN_Converter | Ext_Modules:MP1584EN | U10 |
| 1 | MPU6500 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J6 |
| 1 | Prog_Header | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | TPS2113APWR | TPS2113APWR:SOP65P640X120-8N | U11 |
| 1 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J5 |
| 1 | XL3608_Boost_Module | Ext_Modules:XL3608 Boost Module | U8 |
| 1 | XL4015_Module | Ext_Modules:XL4015 Buck Converter | U4 |

failsmakes/RC_Receiver_PCB_ESP32-WROOM
Bu proje, RC-Receiver-ESP yazılımı için tasarlanmış ESP32-WROOM tabanlı RC alıcı devresinin PCB çizimini içerir. Tasarım KiCad 10.0.1 ile hazırlanmıştır.


danielboston38/linktovideo
Link to Video — composite video + USB-C power replacement for the NES RF modulator. OSHWA certified open source hardware, UID US002842.

/finalized-bluetooth-remote/finalized-bluetooth-remote.kicad_pcb.jpg?size=s&soon)
3pnguyen/esp32-bluetooth-media-keyboard
Electronic project that provides the same control as wireless earbuds.

Fryrocket/orca-review
PUBLIC review mirror for Orca — Claude reads raw source here; Grok implements in private multi-agent-orchestration. No secrets.


altLab/AltoEspectro
Projecto de Uma Camara de CCD arrefecida para Espectroscopia, imagem de scanning, ou para fotografia panorâmica se utilizada com cabeça panorâmica.
It measures 110.5 × 102.9 mm and has 2 copper layers, 1.6 mm thick.
75 parts, built around the ESP32-S3-WROOM-1-N8, RZ7886, 1.5KE6.8A and BC517. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the doabayomi/ndrive-board repository on GitHub, at the commit this page was made from: the board is REV1/nit_rover.kicad_pcb and its schematic REV1/nit_rover.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask doabayomi before reusing the design.