2 layers100.5 × 144.5 mm
Sp-1
guthmanny/feahi_rp2350
Soran SP-1 sampler firmware (RP2350 + ESP32-C6) and CBI-40 hardware
296 parts
2 layers50 × 30 mm
DAP Link V0 1
do-del/Dap-link1学习如何制作DapLink中
- Size
- 50 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 73
- Pads
- 194
- Tracks, vias
- 287, 229
- Pours
- 203
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Mar 2023
- Updated
- 9 Mar 2023
Overview
DAP Link V0 1 is an open-source printed circuit board by do-del, from the do-del/Dap-link repository on GitHub. It is a 2-layer board of 50 × 30 mm with 44 parts on 73 nets, routed with 287 tracks and 229 vias.
It is built around the W25Q32JVSSIQ, SPX3819M5-L-3-3 and TYPE-C-16PIN-0. Its parts include 20 capacitors, 11 resistors, 3 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
3
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TYPE-C-16PIN-0
SMD-40℃~+85℃ 1 10000 times 16P 20V 3A 7.35mm Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSBXCONNUSB Connectors
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C8, C9, C10, C11, C12, C13, C14, C15, C17, C19 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C20 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C18 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C7 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 2 | KEY | ADel:SW_3x4 | SW1, SW2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x04_Pin | ADel:Conn_2.54_01x04_SMD_V | J2 |
| 1 | Conn_01x04_Pin | ADel:SH1.0mm_4P_WT | J1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STM32F103RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | Type_C_16PIN | ADel:TYPE-C-16PIN_SMD | USB1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | ~ | ADel:0.91_OLED_15P | OLED1 |
Questions
How big is the DAP Link V0 1 PCB?
It measures 50 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DAP Link V0 1 use?
44 parts, built around the W25Q32JVSSIQ, SPX3819M5-L-3-3 and TYPE-C-16PIN-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DAP Link V0 1 KiCad files?
From the do-del/Dap-link repository on GitHub, at the commit this page was made from: the board is Hardware/DAP_Link_V0_1/DAP_Link_V0_1.kicad_pcb and its schematic Hardware/DAP_Link_V0_1/DAP_Link_V0_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DAP Link V0 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask do-del before reusing the design.
Similar boards
- 4 layers85 × 56 mm
WLKJ2025011CAR MOTOR V1.2
TUO4742/SeedlingRobot
Full-stack ROS2 automatic seedling clamping robot covering mechanical, hardware, STM32/FreeRTOS and motion control.
96 parts - 4 layers48.8 × 55.3 mm
- 4 layers20.7 × 51.3 mm
Bluepill USB C
rohamid/Bluepill-USB-C
Yet another STM32F103 Bluepill PCB with USB C and castellated holes
44 parts - 4 layers100.8 × 84 mm
- 2 layers121.8 × 88 mm
- 2 layers30 × 60 mm
SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers35.6 × 17.8 mm
